Cli: Configuring Cos Priority Queues; Configuring Wrr - Cisco Catalyst 2950 Software Configuration Manual
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Command reference manual (686 pages) ,
- Software configuration manual (674 pages)
Table of Contents
Advertisement
Configuring QoS
CLI: Configuring CoS Priority Queues
Beginning in privileged EXEC mode, follow these steps to configure the CoS priority queues:
Command
Step 1
configure terminal
Step 2
wrr-queue cos-map qid cos1..cosn Specify the queue id of the CoS priority queue. (Ranges are 1 to
Step 3
end
Step 4
show wrr-queue cos-map
To disable the new CoS settings and return to default settings, use the no wrr-queue cos-map global
configuration command.
Configuring WRR
Beginning in privileged EXEC mode, follow these steps to configure the WRR priority:
Command
Step 1
configure terminal
Step 2
wrr-queue bandwidth
weight1...weight4
Step 3
end
Step 4
show wrr-queue bandwidth
To disable the WRR scheduler and enable the strict priority scheduler, use the
no wrr-queue bandwidth global configuration command.
Catalyst 2950 Desktop Switch Software Configuration Guide
24-24
Purpose
Enter global configuration mode.
4 where 1 is the lowest CoS priority queue.)
Specify the CoS values that are mapped to the queue id.
Default values are as follows:
CoS Value
CoS Priority Queues
0, 1
1
2, 3
2
4, 5
3
6, 7
4
Return to privileged EXEC mode.
Display the mapping of the CoS priority queues.
Purpose
Enter global configuration mode.
Assign WRR weights to the four CoS queues. (Ranges for the
WRR values are 1 to 255.)
Return to privileged EXEC mode.
Display the WRR bandwidth allocation for the CoS priority
queues.
Chapter 24
Configuring QoS
78-11380-04
Advertisement
Table of Contents
Troubleshooting
