Figure 27. Cabling—Cabled hard-drives with a PERC card
1.
front-panel HDD LED controller
connector on the system board
3.
SATA tape drive connector on system
board
5.
SAS connector on PERC card
7.
front-panel HDD LED controller
connector on the PERC card
9.
tape drive
Next steps
1.
Install the internal hard-drive bay into the chassis.
2.
If disconnected, reconnect the power and data cable(s) to the remaining hard drive(s) in the internal
hard-drive bay.
Related Links
Removing the internal hard-drive bay
Installing a cabled hard drive
2.
SATA optical drive connector on system
board
4.
system board
6.
PERC card
8.
hard drives
10. optical drive
75