Table of Contents
Advertisement
Ofrecido por www.electromanuales.com
Problem
Picture slanted
Noisy picture when viewing
a TV channel.
No unscrambled picture
whilst viewing an
unscrambled channel with a
decoder connected through
the Scart connector
3/
3.
S
Remote control does not
function.
The standby indicator
the TV flashes.
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
Solution
• Using the menu system, select the "Picture Rotation" option
in the "Detail Set Up" menu to correct the picture slant (see
page 16).
• Using the menu system, select the "Manual Programme
Preset" menu and adjust Fine Tuning (AFT) to obtain better
picture reception (see page 15).
• Using the menu system, select the "Noise Reduction" option
in the "Picture Adjustment" menu and select "Auto" to
reduce the noise in the picture (see page 9).
• Using the menu system, select the "Features" menu. Then
enter "Detail Set Up" option and set "AV3 Output" to "TV".
• Check that the Decoder is not connected on the scart
2/
2.
• Check that the Media Selector on the remote control is set to
the device you are using (VCR, TV or DVD).
• If the remote control does not operate the VCR or DVD even
when the Media Selector has been set correctly. Enter the
necessary code set as explained on "Remote Control
Configuration for VCR/DVD" chapter of this instruction
manual (see page 22).
• Replace the batteries.
• Contact your nearest Sony service centre.
on
Additional Information
GB
25
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
