Cisco 6500 Series Software Configuration Manual page 407
Hide thumbs
Also See for 6500 Series:
- Configuration manual (392 pages) ,
- Configuration note (212 pages) ,
- Installation manual (194 pages)
Table of Contents
Advertisement
Chapter 31
Configuring PFC QoS
•
•
•
Filtering for PFC QoS can use Layer 2, 3, and 4 values. Marking uses Layer 2 CoS values and Layer 3
Note
IP precedence or DSCP values.
Internal DSCP Values
These sections describe the internal DSCP values:
•
•
Internal DSCP Sources
During processing, PFC QoS represents the priority of all traffic (including non-IP traffic) with an
internal DSCP value. PFC QoS derives the internal DSCP value from the following:
•
•
•
•
The trust state of traffic is the trust state of the ingress LAN port unless set otherwise by a matching ACE.
A trust-cos policer cannot restore received CoS in traffic from untrusted ingress LAN ports. Traffic from
Note
untrusted ingress LAN ports always has the ingress port CoS value.
PFC QoS uses configurable mapping tables to derive the internal 6-bit DSCP value from CoS or IP
precedence, which are 3-bit values (see
section on page 31-66
on page
Egress DSCP and CoS Sources
For egress IP traffic, PFC QoS creates a ToS byte from the internal DSCP value and sends it to the egress
port to be written into IP packets. For trust-dscp and untrusted IP traffic, the ToS byte includes the
original 2 least-significant bits from the received ToS byte.
Note
The internal DSCP value can mimic an IP precedence value (see
78-14099-04
Policers, page 31-19
Attaching Policy Maps, page 31-21
Egress CoS and ToS Values, page 31-21
Internal DSCP Sources, page 31-17
Egress DSCP and CoS Sources, page 31-17
For trust-cos traffic, from received or ingress port Layer 2 CoS values
Traffic from an untrusted ingress LAN port has the ingress port CoS value and if traffic from
Note
an untrusted ingress Ethernet port matches a trust-cos policer, PFC QoS derives the internal
DSCP value from the ingress port CoS value.
For trust-ipprec traffic, from received IP precedence values
For trust-dscp traffic, from received DSCP values
For untrusted traffic, from ingress port CoS or configured DSCP values
or the
"Mapping Received IP Precedence Values to Internal DSCP Values" section
31-67).
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
the"Mapping Received CoS Values to Internal DSCP Values"
Table 31-1 on page
Understanding How PFC QoS Works
31-5).
31-17
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Cisco 6500 Series
Related Products for Cisco 6500 Series
- Cisco 6503 - Catalyst Firewall Security Sys
- Cisco 6503-E - Catalyst Chassis With Supervisor Engine 32 Switch
- Cisco 6504-E - Catalyst Chassis With Supervisor Engine 32 Switch
- Cisco 6506 - Catalyst Chassis Switch
- Cisco 6513 - Catalyst Switch
- Cisco Catalyst 6509
- Cisco Catalyst 6513-E
- Cisco Catalyst 6500-E Series