Page 1
Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this infor- mation to your dealer when you require service. Model number Serial number P/NO : 3828VA0525T (MF056A, 151E/138P TX)
13 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer or “LG Electronics U.K. Ltd.” If the type of plug supplied is not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
Page 3
Safety instructions have two kinds of information, and each meaning of it is as below. The violation of this instruction may cause serious injuries and even death. WARNING The violation of this instruction may cause light injuries or damage of the NOTES product.
VOL +/- (Volume Up/Down) Increases/decreases sound level. PR +/- (Programme Up/Down) Selects a programme. Adjusts the factory preset picture accord- ing to the room. Q.VIEW Returns to the previously viewed pro- gramme. VCR BUTTONS Controls a LG video cassette recorder. Owner’s Manual 5...
Page 6
Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control aim it at the remote control sensor of the set. - There's maybe a defect in consecutive operation of remote control in specified brightness according to this set feature. MUTE Switches the sound on or off.
Location and Function of Controls Location and Function of Controls 42PX4R series 42PX3RV series 1. Power Button Switches the set on from standby or off to standby. 2. Remote Control Sensor 3. INPUT or TV/AV Button Selects the TV, AV, Component, RGB or HDMI modes. Switches the set on from standby.
Page 8
Introduction - Shown is a simplified representation of the set. - What is shown here may be somewhat different from your set. - This manual explains the features available on the 42PX4R series. HDMI/ AUDIO INPUT RGB INPUT DVI(VIDEO) RS-232C INPUT REMOTE CONTROL (CONTROL/SERVICE)
External Equipment V External Equipment V HDMI AUDIO INPUT REMOTE CONTROL Connection to PC iewing Setups iewing Setups <Back Panel> COMPONENT COMPONENT AUDIO AUDIO (MONO) (MONO) S-VIDEO S-VIDEO VIDEO VIDEO AUDIO AUDIO RGB INPUT AUDIO AUDIO A A V4 V VARIABLE ARIABLE AUDIO OUT AUDIO OUT...
- HDMI , the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing. - This set can receive the High-Definition Multimedia Interface (HDMI) or Input of Digital Visual Interface(DVI). - This set supports HDCP (High-bandwidth Digital Contents Protection) Protocol for the set (480p, 720p, 1080i) modes.
Installation Accessories Accessories Owner’s Manual 1.5V Alkaline batteries Fixing the set assembly to the wall to protect the set tumbling - Secure the set assembly by fixing it to a wall by using the Eye Bolts/Wall brackets. Optional Extras Optional extras can be changed or modified for quality improvement. Without any notification new optional extras can be added.
Installation Options Installation Options • The set can be installed in different ways such as on a wall, or on a desktop etc. • Install this set only in a location where adequate ventilation is available. Wall Mount: Horizontal Installation •...
Operation urning on the Set urning on the Set - When using the remote control, aim it at its sensor on the set. Turning on the set just after installation 1. Connect power cord correctly, the set is switched to standby mode. 2.
On screen menus On screen menus - The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. Menu selection Press the MENU button and then D D / E E Press the button and then the...
Operation Channel Menu Options Channel Menu Options Auto Programme Tuning - All stations that can be received are stored by this method. It is recommended that you use auto programme during instal- lation of this set. 1. Press the MENU button and then use the STATION menu.
Channel Menu Options Channel Menu Options Assigning a Station Name 1. Repeat the ‘Manual programme tuning’ steps 1 to 2. 2. Press the button and then button to select D D / E E 3. Press the button to display the Name Storage STATION...
- You can adjust red, green, or blue to any colour temperature you prefer. - You can enjoy the vivid and hi-definition picture with LG’s Excellent Digital Reality processor technology. - It’s not available to use this function in RGB[PC], HDMI[PC] mode.
Sound Menu Options Sound Menu Options TV Speaker - You can adjust internal speaker status. - In COMPONENT, RGB[PC] and HDMI[PC] mode, TV speak- er/variable audio can be output even though there is no video signal. - If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.
Operation Special Menu Options Special Menu Options Child Lock - The set can be set up so that it can only be used with the remote control. - This set programmed to remember which option it was last set to even if you turn the set off. - In ‘...
Screen Menu Options Screen Menu Options Setting Picture Format - You can watch the screen in various picture formats; Full (option), Original 16:9 (Wide), • Spectacle When your TV receives the wide screen signal, following selection will lead you to adjust the picture horizontally, in non-linear proportion, to fill the entire screen.
Operation eletext (option) eletext (option) SIMPLE Text (option) Page selection 1. Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
(Picture-in-Picture) Feature (Picture-in-Picture) Feature - PIP lets you view 2 different inputs (sources) on your set screen at the same time. - It’s not available to use this function in TELETEXT mode. Watching PIP Press the PIP or PIP/DW button to show the sub picture. •...
Miscellaneous Programming the Remote (option) Programming the Remote (option) G The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode Programming a code into a remote mode 1.
roubleshooting Checklist roubleshooting Checklist No picture & No sound Picture OK & No sound The remote control doesn’t work Picture appears slowly, after switching on No or Poor colour or Poor picture Horizontal/vertical bars or picture shaking No output from one of the speakers Unusual sound from inside the set...