Advertisement
Quick Links
Thank you for choosing Mobile Broadband E1550
E1550 ( hereinafter referred to as the E1550).
Note:
This manual briefly describes the appearance, the preparation and the process for
installing/uninstalling.
Getting to Know your E1550
The following figures show the appearance of the E1550. The actual product may differ.
Micro SD card slot
Holds the Micro SD card.
USIM/SIM card slot
Holds the USIM/SIM card.
Lanyard Hole
Ties the c
ap and the E1550 together so that they will not be easily lost.
Note:
The lanyard is an optional accessory. If it is not provided in the package, you can buy one
yo
urself.
USB connector
Connects to the USB interface of the PC.
Indicator
Indicates the status of the E1550.
Green, blinking twice every 3s: The E1550 is powered on.
Green, blinking once every 3s: The E1550 is registered to the 2G network.
Blue, blinking once every 3s: The E1550 is registe
Green, always on: The 2G connection is set up.
Blue, always on: The 3G connection is set up.
Cyan, always on: The 3G+ connection is se
Off: The E1550 is removed f
Preparing the E1550
1. Take out of the back cover of the E1550.
2.
Insert the USIM/SIM card and
cards are properly inserted.
Note:
Micro SD card is an optional accessor
package, you can buy one yourself.
Do not remove the USIM/SIM card and the Micro SD card when they are being used.
Removing the cards during an operation may dama
and data stored on the cards may be corrupted.
t up.
rom the PC.
the Micro SD card into the card slots. Make sure that the
y. If the Micro SD card is not provided in the
red to the 3G/3G+ network.
ge the cards as well as the device,
Advertisement
Related Manuals for Huawei E1550
Summary of Contents for Huawei E1550
-
Page 1: Usb Connector
This manual briefly describes the appearance, the preparation and the process for installing/uninstalling. Getting to Know your E1550 The following figures show the appearance of the E1550. The actual product may differ. Micro SD card slot Holds the Micro SD card. -
Page 2: Installation Guide
The Unplug or Eject Hardware interface is displayed. 2. Select the hardware related to the E1550 and click Stop. 3. When the prompt "It is safe to remove the device" is displayed, remove the E1550. Note: Before removing the E1550, exit the management program.