Error Messages And Warning Messages; Error Messages - Sony SRW-5100 Operation Manual
Hd digital videoscassette player
Hide thumbs
Also See for SRW-5100:
- Operation manual (34 pages) ,
- Brochure (20 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Error Messages and Warning Messages
Error Messages
When the unit ceases to operate correctly due to
malfunction or an internal system error, the alarm will
sound and an error message will be displayed on the
display.
Only one message will be displayed even when multiple
errors occur, but the error log menu keeps a history of the
errors.
For more information about error messages, refer to the
Maintenance Manual.
After the error occurs, eliminate the cause of the error and
turn the unit back on. If the error message appears again
when the unit is turned on, contact your Sony
representative.
For more information about eliminating errors, refer to
the Maintenance Manual (Volume 1).
.
Item number
Display
01
REEL SLACK THREAD ERROR
02
REEL SLACK FF/REW/SEARCH
ERROR
03
REEL SLACK PLAY/REC ERROR
04
REEL SPEED ERROR
05
REEL FG ERROR
06
TAPE TENSION ERROR
07
CAPSTAN TROUBLE
08
DRUM TROUBLE
09
TH/UNTH MOTOR TIMEOUT
0A
FULL TOP ERROR
10
DEW DETECTED
11
TAPE TOP/END SENSOR
104
Error Messages and Warning Messages
Protection mode
To protect the tape and the mechanical parts of this unit,
the servo control system automatically stops tape transport
and the drum motor and enters protection mode when an
error occurs.
Cassettes may not be inserted or ejected during protection
mode.
Note
When a cassette is stuck in the unit because of protection
mode, make sure to disconnect the power before removing
the cassette manually.
For information about removing cassettes manually, refer
to the Maintenance Manual (Volume 1).
Error message
Meaning
Tape slack was detected during threading or unthreading.
Tape slack or a broken tape was detected during search, fast
forward, or rewind.
Tape slack, a broken tape, or an S-side reel or T-side reel lock was
detected during playback.
Tape transport speed error was detected during forward winding or
rewinding.
When a cassette was inserted, a fault in the S-side reel or T-side
reel operation was detected.
During playback, excess tension was detected.
A capstan motor operation fault was detected.
A drum motor operation fault was detected.
A fault was detected in a threading or unthreading operation.
When threading, a failure of the tape beginning processing to
terminate was detected.
Condensation was detected.
The tape beginning and tape end were detected at the same time.
Advertisement
Table of Contents
