Vcr Video - Samsung DVD-V5600 Service Manual
Hide thumbs
Also See for DVD-V5600:
- User manual (232 pages) ,
- Manual del instrucción (56 pages) ,
- User manual (56 pages)
Table of Contents
Advertisement
13-4 VCR Video
(1) Luminance Signal Recording System
CANAL V IN
52
AV V IN
50
AUX V IN
54
TU V OUT
48
AV VIDEO OUT
61
CANAL V OUT
63
clock
68
data
69
REC COLOR
1) Outline
Fig. 13-21 shows the video signal recording system. Line input signal or tuner input signal is selected by Micom.
Input selection is done with the INPUT SELECT button on the remote. The input select control signal is supplied
to the pin 68(clock),69(data) of video IC from Micom IC.
The selected video input signal goes to pin 48(TUNER),50(AV), 52(CANAL), 54(AUX) of Lumi/Chroma processor
IC (IC301). And then it enters VIDEO AGC circuit. The gain of AGC circuit is controlled by AGC detector so that
the output is constant (approx. 2Vp-p). The output signal of AGC is clamped by the FBC(Feed Back Clamp) cir-
cuit. This signal appears at pin 26, after being amplified at the internal video amp and driver.
The output signal from the clamp circuit enter the detail enhancer circuit. In the detail enhancer circuit, the low
level high frequency video signal is emphasized to improve the original signals frequency characteristics.
onlinear emphasis circuit is employed to improve S/N and frequency response characteristics together with the
following main emphasis. Noise effects the FM wave at a higher frequency, so the S/N can be improved by
emphasizing the higher frequency before recording and by suppressing the play signal during demodulation.
The difference of non linear emphasis from main emphasis is that the emphasis characteristics change is depend-
ing on the input level. The gain of the emphasis circuit is inversely proportional to the level of the high frequency
component of the signal. That is, if the high frequency portion of the signal is low the main emphasis circuit will
amplify the signal.
Samsung Electronics
AGC
DET
VIDEO
F. B
AGC
CLAMP
6dB
QV/QH
AMP
INSERT
FM
MAIN
MOD
EMPH
REC
W/D
FM EQ
CLIP
FM
AGC
+
78
Fig. 13-21 Luminance Record Process
46
CCD
YNR Y/C
LPF
COMB
NL
DETAIL
EMPH
ENH
79
IC301
LA71750/30M
Circuit Operating Descriptions
43
3 MHz
LPF
AMP
CLAMP
REC
CURRENT
AMP
94
SP H'D
88
SLP H'D
13-21
- Quick Links:
- Vcr Adjustment
- Trouble Shooting 5-1
Hide quick links:
Advertisement
Table of Contents
