Receiving a fax
Option
Redial
Prefix Dial
ECM Mode
Modem Speed
Description
Set the machine to re-dial the fax number if
the recipient's fax line is busy or not answered.
Set the number of re-dial attempts and the
interval between attempts.
• Redial Term: Select terms for re-dialing
using the up/down arrows.
• Redial Times: Select a re-dial time using
the up/down arrows. Select 0 to disable
redialing.
Set the number to be dialed before the
destination number. Users may use this to
access a PABX (e.g. 9) or an area code (e.g. 02).
Once this number is set, it automatically
appears on the screen when entering a
phone/fax number.
Set the machine to correct errors. This helps
overcome poor line quality and ensures any
faxes you send are properly transmitted to any
other error correction-equipped fax machine.
Sending a fax in this mode may take more
time.
Set the modem speed (4.8Kbps - 33.6Kbps).
Option
Receive Mode
Ring to Answer
Toll Save
Junk Fax Setup
Description
Select the fax receiving mode.
• Telephone: Press On Hook Dial and then
Start to receive a fax.
• Fax: Receive incoming faxes normally and
immediately enter the fax reception mode.
• Answering Machine/Fax: Use when an
answering machine is attached to your
machine. Your machine answers the
incoming call, and the caller can leave a
message on the answering machine. If the
fax machine senses a fax tone on the line,
the machine automatically switches to Fax
mode to receive the fax.
Set the number of times the machine rings
before answering an incoming call.
Set the machine to send faxes in the toll save
time to reduce phone bill costs.
Use this feature to reject faxes sent from
numbers stored in memory as junk fax
numbers. This feature is useful to block any
unwanted faxes. When you turn this feature
on, you can access additional options to set
junk fax numbers. This option may not be
available in your country.
6. Faxing(Optional)
162