CONTENTS S No DESCRIPTION PAGE No SPECIFICATIONS AUTOSPRAKLE FEATURES CONTROL & FUNCTIONS WIRING DIAGRAM PROGRAM TIMING EXPLODED VIEWS PARTS LIST FAULT FINDING-GUIDE This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No.
Specifications 1 .Model Description AUTOSPARKLE 2. Machine Type Top Loading fully Automatic Agitator wash 3. Capacity 5 Kg. 4. M/c Wt. 38 Kg. 5. M/c Dimension 570 mm (W) x 590 mm (B) x 1000 mm (H) 6. Cabinet Finish Pre painted Steel 7.
Page 4
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001...
AUTOSPARKLE - FEATURES : Spin Basket - P.P. Material Easy spin basket removal is possible Hose less bleach inlet system Single Pressure switch hose. LID switch control for Agitate/Spin operations. (8 Bit controller) Tub ring mounting with out screws A LOOK AT THE CONTROL PANEL... The following are the knobs/switches available at the panel Power ON/OFF Switch Water level selector...
Page 6
This switch is basically a ON/OFF switch controlling the supply to the machine, by pressing this switch, the machine is turned ON. To Switch off the machine, press the switch again. Machine operation stops automatically at the end of the cycle and this switch will still remain in ON position Similar To ALPHA model and the user has to switch it OFF before removing the clothes from the spin basket.
Page 7
COURSE SELECT This feature enables the user to select the various combination of SOAK, WASH, RINSE and SPIN. The Selection is effected by pressing this Course Select button and indicated by the glowing of the corresponding LED indicator in the panel.
The timing sequences of this individual cycle are enclosed for your ready reference. OPERATING INSTRUCTIONS: 1. Add detergent and load the clothes as usual. 2. Connect the Fill Hose and Power cord to the appropriate points. 3. Place the Drain Hose on the ground. 4.
Page 9
soaking time is 32 minutes with the machine agitating for the first 2 minutes. This is followed by 20 seconds agitation and 3 minutes soak cycle for the remaining 30 minutes. *ERROR SIGNALS: During operation, if any malfunction or misoperation occurs, the timer automatically indicates the same to he user through an appropriate error signal.
Wiring Diagram This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001...
PROGRAM TIMIMG (TIME IN MINUTES) OPERATION Sequence Wash Program NORMAL SPEEDY DELICATE HEAVY Fill Agitronic Soak Soak/Agitation 32(By 32(By selection) selection) Wash Agitation Soak/Agitation Agitation RINSE Drain,Max Spin Fill Agitation Drain,Max SPIN Spin TOTAL TIME(Excluding fill) Note: 1.Fill time not included in the above table. 2.Agitation rate for Normal,speedy &Heavy is 65 SPM and Delicate is 45 SPM This document is only intended for qualified technicians who are aware of the respective safety regulations.
USER INSTRUCTIONS Load Laundry Fill required amount of Water Manually Add Detergent and Adjuncts as required Program the machine (Normal/Wash) Press Start M/C Washes as per the program and stops Water filling should be controlled manually. The in built pressure switch is provided to ensure minimum water level of 25 Ltrs.
Page 13
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001...
Page 14
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001...
Page 15
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001...
Page 16
This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001...
Page 17
Modified parts list follows This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001...
PARTS LIST Part Code Description 3775 P0132003300 ACCEPTANCE STICKER P014290020A ADHESIVE TAPE - WHIRLPOOL P010110010E AGITATOR P010113020A BALANCE RING ASSY (APWH) P0129130100 BASKET ASSY. COMPLETE - AGI PL5 S012620010A BEARING-BALL SEALED P012900010A BRACKET SUSPENSION P010111500D BRACKET-CAPACITOR P010111140B BRAKE & ARM ASSY.
Page 19
Part Code Description 3775 P014320020A HOUSING - FIXED FOOT P0143200600 HOUSING ADJUSTABLE FOOT P012960190E LID - BOTTOM (A/S) - APWH P012960180G LID (TOP) (A/S) - APWH P012960170C LID ASSEMBLY WITH GLASS(A/S)APWH P012960040B LID GLASS - A/S P0129901700 LID PAD - A/S S0116300100 LOCK WASHER - M8 (BRAKEBAND&CLUTCH ARM) P010111130C...
Page 20
Part Code Description 3775 S0140000100 TWIST CLIP P0168800100 USER MANUAL - A/S 110V, S011600070A WASHER S0116001900 WASHER - 4.75 X 12 X 1.2 THK. S0116001600 WASHER (13 X 23 X 1) S0116001800 WASHER (9 X 17 X 1.6) P010171140E WASHER FAUCET M/C END S0116000100 WASHER-PULLEY P0168310200...
Page 21
Chk the power supply at brake solinoid, is it 110 V This document is only intended for qualified technicians who are aware of the respective safety regulations. Revised on 07/01/2003 Subject to modification Document No. WOI/WM/2003/001...