Beep Symptoms; No-Beep Symptoms - Lenovo ThinkPad T40 Hardware Maintenance Manual
Hide thumbs
Also See for ThinkPad T40:
- Manual de maintenance et d’identification des incidents (122 pages) ,
- (120 pages) ,
- Service en probleemoplossing (118 pages)
Table of Contents
Advertisement
Beep symptoms
Symptom or error
One beep and a blank,
unreadable, or flashing LCD.
One long and two short beeps,
and a blank or unreadable
LCD.
Two short beeps with error
codes.
Two short beeps and a blank
screen.
Three short beeps, pause,
three more short beeps, and
one short beep.
One short beep, pause, three
short beeps, pause, three more
short beeps, and one short
beep.
Only the cursor appears.
Four cycles of four short beeps
and a blank screen.
Five short beeps and a blank
screen.
No-beep symptoms
Symptom or error
No beep, power-on indicator
on, LCD blank, and no POST.
No beep, power-on indicator
on, and LCD blank during
POST.
The power-on password prompt
appears.
The hard-disk password prompt
appears.
The DOS full screen looks
smaller than it should.
ThinkPad T40/T40p, T41/T41p, T42/T42p Series
Downloaded from LpManual.com Manuals
Symptom-to-FRU index
FRU or action, in sequence
1. Reseat the LCD
connector.
2. LCD assembly.
3. External CRT.
4. System board.
1. System board.
2. LCD assembly.
3. DIMM.
POST error. See "Numeric
error codes" on page 58.
1. System board.
2. DIMM.
1. DIMM.
2. System board
Reinstall the operating
system.
System board (security chip)
System board
FRU or action, in sequence
1. Make sure that every
connector is connected
tightly and correctly.
2. DIMM.
3. System board.
1. Reseat DIMM.
2. System board.
A power-on password or a
supervisor password is set.
Type the password and press
Enter.
A hard-disk password is set.
Type the password and press
Enter.
Start the ThinkPad
Configuration program and set
the Screen expansion
function.
63
Hide quick links:
Advertisement
Table of Contents
