Related Manuals for Motorola L512CBT
Summary of Contents for Motorola L512CBT
- Page 1 User’s Guide For L512CBT/L513CBT/L514CBT/L515CBT DECT 6.0 Cordless / Corded Phones ® with Bluetooth Answering System Warning Use only the power adapters and telephone line cords provided in the box.
- Page 2 Motorola Phone! Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
- Page 3 This User’s Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in 'Getting Started' on the next few pages.
-
Page 4: Table Of Contents
1. Getting started ......... 7 3.9 Receiving a home call while on a cellular call ..........23 1.1 Installing and charging the cordless 3.10 Ending a call ..........23 handset battery pack ........8 3.11 Adjusting volume ........23 1.2 Installing the cordless charger..... 8 3.12 Dialing from the redial list ...... - Page 5 3.23 Setting the Area Code ....... 29 4.6 Answering a cellular call ......37 3.24 Resetting all settings ......... 30 4.7 Receiving a cellular call while on a 3.25 Using your answering machine ....30 home call ........... 37 3.25.1 Playing messages ......30 4.8 Receiving a home call while on a 3.25.2 Turning on or off the answering cellular call..........
- Page 6 4.19.2 Transferring an external home call to another cordless handset or corded base ........43 4.19.3 Three-party conference call ..44 4.20 Setting the dial mode......... 44 4.21 Setting the Flash Time....... 44 4.22 Setting the Area Code ....... 44 4.23 Registration ..........
-
Page 7: Getting Started
1. Getting started HANDSET RANGE Optimal range is reached when there are no other WARNING electrical appliances working within the range area. Any • Do not place your phone in the bathroom or other obstruction between the corded base and cordless humid areas. -
Page 8: Installing And Charging The Cordless Handset Battery Pack
Installing and charging the Installing the cordless charger cordless handset battery pack 1. Plug the power adapter with the bigger pin plug into 1. Slide off the battery compartment cover to remove it. the cordless charger. 2. Place the supplied rechargeable battery pack in the 2. -
Page 9: Connecting The Corded Base
Connecting the corded base Wall mounting on corded base This phone can be mounted on any standard wall plate. 1. Plug the power adapter with the smaller pin plug & telephone line cord into the corded base. 2. Snap the wall mount adapter into the notches on the corded base’s back. -
Page 10: Setting The Display Language
Setting the display language On the cordless handset: On the corded base: DATE & TIME 1. Press MENU to select 2. Repeat to edit the year and date. 1. Press and then /VOL+ or /REDIAL/ Settings 3. Press VOL+ or REDIAL/VOL- to move between the VOL- to select YEAR DATE... -
Page 11: Getting To Know Your Phone
2. Getting to know your phone SCROLL UP/ VOLUME UP a) In menu mode: Press to scroll up. Overview of the corded base b) During a call: Press to increase volume. c) Calls list/phonebook/redial list entry: Press to scroll up the list. d) In answering machine mode: Press to increase message playback volume. - Page 12 b) Calls list/phonebook/redial list entry: Press to #/ PAUSE/ ABC/ FORMAT make a call with speakerphone. a) In idle/pre-dial/number editing mode/during a call: Press to insert a "#", press and hold to insert a c) During ringing: Press to answer a call with pause.
- Page 13 11 ALPHANUMERIC KEYPAD 16 LEFT/ PHONEBOOK a) In idle/pre-dial/editing mode/during a call: Press a) In idle mode/during a call: Press to access the to enter characters/numbers. phonebook. b) In idle mode: Press and hold to activate speed dial. b) In editing mode: Press to move the cursor to the left. 12 PLAY/ STOP 17 LEFT SOFT KEY a) In idle mode: Press to playback answering machine...
- Page 14 Corded base LCD display On when the answering machine is turned on. Flashes when new answering machine message is received. On when a Bluetooth device is paired. Off when Bluetooth feature is disabled. On when Bluetooth device is connected with the telephone base. Off When Bluetooth device(s) is (are) disconnected from the telephone base.
- Page 15 Overview of your cordless handset Get acquainted with the following 14 buttons on your handset and their multi-function tasks. Menu / Select a) In idle mode: Press to access menu list. b) In menu/editing mode: Press to confirm and save the settings.
- Page 16 Scroll down / Volume down / Redial list # / Pause / ABC / Format a) In idle mode: Press to access redial list. a) In idle/pre-dial/number editing mode/during a call: Press to insert a #, press and hold to insert a b) In menu mode: Press to scroll down.
- Page 17 11 * / Tone b) In pre-dial/editing mode: Press to delete one character/digit. Long press to delete all characters/ a) In idle/pre-dial/editing mode: Press to insert a digits. b) During a call: Press to switch from pulse to tone c) During a call: Press to mute/unmute the call. dialing temporarily if pulse mode was selected d) In calls list entry: Press to delete the entry.
- Page 18 Display icons Animation in motion. Battery is charging. On when the speakerphone is turned on. In idle mode, the current time is displayed. On when the answering machine is turned on. In Caller ID mode, the time of call is displayed. Flashes when a new message is received.
-
Page 19: Enjoy Your Corded Base Phone
Enjoy your corded base phone 3. Using the phone HOME line - Your conventional telephone land line. Pairing - This refers to the process of two Bluetooth Introducing Bluetooth devices registering device information with each other. Your new telephone system with Bluetooth wireless The telephone base must be paired with a Bluetooth technology has the following features: enabled mobile phone before the Bluetooth device can... -
Page 20: Bluetooth Setup
Bluetooth feature and search for a new device. • Press . The display will show the two Cellular • Once your Bluetooth enabled mobile phone has names of the paired devices. found the Motorola L512CBT/L513CBT/L514CBT/ • Press /VOL+ or /REDIAL/VOL- to select the L515CBT telephone, select it. -
Page 21: Paired Devices
Remove Cellular NOTE 5. Press to confirm. If you select When pairing a new cellular, the connected cellular will press again to confirm. be disabled temporarily. NOTE 3.2.3 Paired Devices • When the connected cellular is removed, The cellular(s) paired will be displayed in the paired corresponding device will be off. -
Page 22: Speed Dial Calling
Answering a cellular call If there are two Bluetooth enabled mobile phones paired and connected, 1. Pick up the corded handset to answer the incoming 1. Enter the phone number, and then press cellular call. CELLULAR (Base) and /VOL+ or /REDIAL/ VOL- to select the desired cellular device. -
Page 23: Receiving A Home Call While On A Cellular Call
To swap the cellular line to a home call: To swap the line to a cellular call: • While talking on a cellular call, press /SPEAKER • While talking on a home call, press /CELLULAR (Base) on the corded base to swap to the home call. (Base) on the corded base to swap to the cellular The cellular call will automatically be placed on hold call. -
Page 24: Dialing From The Redial List
3.12 Dialing from the redial list 3.14 Muting a call 1. Press /REDIAL/VOL- and then scroll /VOL+ 1. During a call, press to mute the /REDIAL/VOL- to the entry you want to redial. microphone, so that you can talk to someone else in the room without your caller hearing you. -
Page 25: Dialing From The Phonebook
3. Press and then /VOL+ or /REDIAL/ caller will be displayed together with the date and time of the call (if provided by the network). VOL- to select the speed dial key from /1 to WXYZ/9. NOTE • If the telephone number is not available for incoming 4. -
Page 26: Viewing The Calls List
used to view the calls log, the icon on the other 3. Press twice and then enter the name. handsets remains on (for multi-pack use only). 4. Press and then edit the number. 3.18.2 Viewing the calls list 5. Press to save. -
Page 27: Personal Settings
3.19 Personal Settings Menu map Main Date & Phonebook Ringer Settings Setup Paired Answer Reset Menu Time Setup Cellular Devices Machine Settings Set Date Ringer Tone Dial Mode Answerer On (if Clr Voice menu & Time answer machine Mail View Ringer Flash Time is off). -
Page 28: Intercom
1. Press NOTE If the cordless handset is not within the valid operation 2. Press /VOL+ or /REDIAL/VOL- to scroll range, this function may not be available. through the menu. During an intercom call, you will hear an alert tone if there 3. -
Page 29: Setting The Dial Mode
3.22 Setting the Flash Time 3. Press to call the cordless handset. 4. When the other cordless handset answers the 600ms The default flash time is . It is unlikely that you intercom call, press on the corded base to should need to change this setting unless advised to do join the conference call. -
Page 30: Resetting All Settings
3.24 Resetting all settings /PLAY/ Stop the message playback. STOP 1. Press and then /VOL+ or /REDIAL/ Reset Settings VOL- to select /SKIP/ Skip to play the next message. 2. Press and then /VOL+ or /REDIAL/ MEMO All Settings VOL- to select /VOL+ Increase the volume. -
Page 31: Setting The Announcement Mode
3. Press to confirm. 3. Press and then /VOL+ or /REDIAL/ VOL- to select the rings to answer. (4 options are Toll Saver 3 Rings 4 Rings 5 RINGS available: , and 4. Press ANS ON/OFF/ to toggle between NOTE answering machine on and answering machine off. -
Page 32: Recording A Memo
3.25.6 Recording a memo 6. Press again to stop recording and save the You can record a memo which is stored on your message. The just saved message is played answering machine and played back like a normal automatically. message. You can also record the announcement by pressing and holding /REPEAT/ANNC to start recording after a... -
Page 33: Call Screening On/Off
3.25.7 Call screening on/off 3.25.9 Remote access Remote access allows you to operate your answering You are able to hear a caller leaving a message. You machine and listen to your messages by calling your can then choose to ignore the caller or pick up the call. phone from another phone. -
Page 34: Setting The Security Code
Press the following keys on your another phone to perform the following functions, after entering your remote access mode. Press... To... Press once to replay the current message from the beginning. Press twice to play the previous message. Play/Stop the message Skip forward to the next message Toggle Answer Off/Announce Only/ Announce and Record modes... -
Page 35: Enjoy Your Cordless Handset
• Press MENU and then VOL+ or REDIAL/VOL- to • Once your Bluetooth enabled mobile phone has SETUP CELLULAR select found the Motorola L512CBT/L513CBT/L514CBT/ • Press MENU. The display will show the two Cellular L515CBT telephone, select it. names of the paired devices. -
Page 36: Paired Devices
• Press MENU to confirm. The display will show For the cellular phone that is not connected: CELLULAR READY? 4. Press MENU and then VOL+ or REDIAL/VOL- to • Refer to section 4.1.1 to proceed with the next steps. CONNECT REMOVE CELLULAR select NOTE... -
Page 37: Speed Dial Calling
Receiving a cellular call while on If there are two Bluetooth enabled mobile phones paired and connected, a home call A short beep during a HOME call indicates that there is 1. Enter the phone number, and then press an incoming CELLULAR call and the screen will display CELLULAR and then VOL+ or REDIAL/VOL- to the caller ID. -
Page 38: Ending A Call
4.11 Muting a call To answer the incoming home call: 1. During a call, press /MUTE to mute the • Press /FLASH on the handset. The cellular line microphone, so that you can talk to someone else call will automatically be placed on hold and will in the room without your caller hearing you. -
Page 39: Adding An Entry To The Phonebook
4. Press MENU and then VOL+ or REDIAL/VOL- to 4. Press /CELLULAR to dial the number from the scroll to the entry you want. cellular line. 5. Press MENU to save. 4.14 Adding an entry to the 4.16 Dialing from the phonebook phonebook 1. -
Page 40: Calls List
4.17.2 Viewing the calls list NOTE • If the telephone number is not available for incoming 1. Press CID to enter the calls list. UNAVAILABLE calls, the handset will display 2. Scroll VOL+ or REDIAL/VOL- through the calls list. • If the incoming call is from a withheld telephone NOTE PRIVATE number, the handset will display... -
Page 41: Deleting A Calls List Entry
4. Press MENU and then edit the number. 5. Press MENU to save. 4.17.4 Deleting a calls list entry 1. Press CID to enter the calls list. 2. Press VOL+ or REDIAL/VOL- to scroll to the entry you want. 3. Press /MUTE to delete the entry. -
Page 42: Personal Settings
4.18 Personal Settings Menu map MAIN DATE PHONE- INTERCOM SETUP HS SETUP SETUP PAIRED ANSWER RESET MENU & TIME BOOK CELLULAR DEVICES MACHINE SETTINGS DATE VIEW RINGER TONE DIAL ANSWERER ON CLR VOICE MENU MODE (If answer machine MAIL TIME RINGER is off) VOLUME... -
Page 43: Intercom
1. Press MENU. 2. Press MENU and then VOL+ or REDIAL/VOL- to select the cordless handset or corded base you 2. Press VOL+ or REDIAL/VOL- to scroll through the want to call. menu. 3. Press MENU to make the call. 3. -
Page 44: Three-Party Conference Call
4.19.3 Three-party conference call NOTE If pulse mode is selected, press TONE/* to switch from 1. During an external home call, press MENU. pulse to tone dialing temporarily when dialing out. After Your caller is put on hold. the call is ended, the dial mode will change back to 2. -
Page 45: Registration
4.23 Registration To register an originally unregistered cordless handset, follow steps 1 through 3 above. Up to 5 handsets can be registered to one corded base. The original cordless handset is pre-registered to use. 4.24 Resetting all settings Additional cordless handsets must be registered to the 1. -
Page 46: Using Your Answering Machine
4.26 Using your answering machine Delete the current message and /MUTE the next message will be played. The answering machine records unanswered calls when it is activated. Toggle the message playback via /SPEAKER earpiece/speakerphone. 4.26.1 Playing messages Through the handset: Exit to idle. -
Page 47: Setting The Announcement Mode
4.26.3 Setting the announcement mode NOTE If Toll Saver setting is selected, the answering machine 1. Press MENU and then VOL+ or REDIAL/VOL- to will pick up after two rings if there are new messages, ANSWER MACHINE select and after four rings if there are no messages. 2. -
Page 48: Recording A Memo
NOTE 3. Press MENU to start recording. When playing the message, pressing /MUTE will 4. Press MENU again to stop recording and save the delete it and the pre-recorded message will be played message. The just saved message is played automatically. -
Page 49: Deleting All Old Messages
4.26.8 Deleting all old messages To enter the remote access mode, dial your phone number from another phone, when you hear the 1. Press MENU and then VOL+ or REDIAL/VOL- to announcement, press TONE/* and then enter the 4-digit ANSWER MACHINE select remote security code (default code is 0000) on your 2. -
Page 50: Setting The Security Code
• Make sure the cordless handset, corded base and select cell phone are located near each other. 3. Press MENU and then enter the 4-digit security • Remove the Motorola L512CBT/L513CBT/ code. L514CBT/L515CBT from your mobile phone's 4. Press MENU to save. - Page 51 icon is not scrolling when the cordless Caller ID does not work handset is placed on the charger • Check your subscription with your network operator. • If you subscribe to high-speed internet service • Incomplete battery contact - adjust the cordless (Digital Subscriber Line - DSL) through your handset on the charger.
-
Page 52: General Information
1. Read this User's Guide. • Check that the power adapter is connected properly 2. Visit our website: www.motorola.com into the electrical outlet. 3. Contact Customer Service in the US and Canada at • Move the cordless handset closer to the corded 1-888-331-3383. -
Page 53: Installation Guidelines
5. Never insert objects of any kind into the product • The product has been dropped or the cabinet has vents as that may result in fire or electric shock. been damaged. 6. Unplug this product from the electrical outlet before •... -
Page 54: Battery Safety Instructions
Motorola branded Products and Accessories manufactured by Binatone • Keep battery packs out of the reach of children. - Page 55 This warranty covers only the first consumer purchaser, OF THE CONSUMER, AND IS PROVIDED IN LIEU OF and is not transferable. ALL WARRANTIES AND MOTOROLA AND BINATONE ELECTRONICS INTERNATIONAL LTD. What will BINATONE ELECTRONICS MAKES NO OTHER WARRANTIES OR CONDITIONS, INTERNATIONAL LTD.
- Page 56 (e) other acts or omissions and Accessories warranty or for ninety (90) which are not the fault or neglect of Motorola or that are Repaired days from the date returned to Binatone Electronics International LTD., are excluded...
- Page 57 BINATONE ELECTRONICS installation, maintenance, alteration, or modification in INTERNATIONAL LTD. Authorized Repair Center. To any way by someone other than Motorola, Binatone obtain service, you must include: (a) a copy of your Electronics International LTD. or its authorized service receipt, bill of sale or other comparable proof of centers, are excluded from coverage.
- Page 58 FCC, ACTA and IC regulations Changes or modifications to this equipment not expressly approved by the party responsible for FCC Part 15 compliance could void the user's authority to operate This equipment has been tested and found to comply the equipment. with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission This device complies with Part 15 of the FCC rules.
- Page 59 FCC Part 68 and ACTA not all areas, the sum of all RENs should be five (5.0) or This equipment complies with Part 68 of the FCC rules less. For more information, please contact your local and with technical requirements adopted by the telephone company.
-
Page 60: Technical Specifications
make changes in its facilities, equipment, operation, or maximum number of devices allowed to be connected procedures that could affect the proper functioning of to a telephone interface. The termination on an interface this product. The telephone company is required to may consist of any combination of devices subject only notify you if such changes are planned. - Page 61 Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. The Bluetooth trademarks and all other trademarks are the property of their respective owners. © 2011 Motorola Mobility, Inc. All rights reserved. Version 3.0 Printed in China...