Page 1
Operating and installation instructions Refrigerator K 9212 i K 9214 iF K 9412 i K 9414 iF en - GB To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time.
Guide to the appliance a Refrigerator section temperature display b Super cool button and indicator light c On/Off and temperature selector dial...
Page 5
a Freezer compartment* b Adjustable shelves c Condensate channel and drain hole d Fruit and vegetable containers Guide to the appliance e Butter and cheese compartment f Egg tray g Door shelf h Interior lighting i Bottle shelf * Depending on model...
Guide to the appliance Optional accessories Bottle rack (depending on model) This bottle rack is available from the Miele Spare Parts Department or your dealer.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
Any other usage is not supported by the manufacturer and could be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation of the appliance.
Technical safety Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. It could be dangerous. If the connection cable is faulty it must only be replaced by a service technician authorised by the manufacturer to protect the user from danger.
Page 10
(e.g. electric shock). Installation, maintenance and repairs may only be carried out by a Miele authorised person in strict accordance with current national and local safety regulations. Repairs and other work by unqualified persons could be dangerous.
Page 11
Correct use Do not store explosive materials in the appliance or any products containing propellants (e.g. spray cans). Thermostats switching on may produce sparks which could present a fire hazard. Flammable compounds could explode. Do not operate any electrical equipment (e.g. an electric ice-cream maker) inside the appliance.
Warning and Safety instructions Do not use any oils or grease on the door seals, as these will cause the seals to deteriorate and become porous with time. If storing food which contains a lot of fat or oil, make sure that it does not come into contact with plastic components as this could cause stress cracks.
(set in stages). Temperature setting Larder section 8 to 12 °C with a thermostat which Refrigerator section 4 to 5 °C is exact to the degree PerfectFresh zone just above 0 °C (digital display). Freezer section -18 °C Wine storage section 10 to 12 °C...
The appliance begins to cool down, and the temperature required for the refrigerator shows in the temperature display. The interior light will come on when the door is opened. To enable the temperature to get...
Switching off for longer periods of time If the appliance is not going to be used for a longer period of time, e.g. whilst on holiday: ^ switch the appliance off, ^ disconnect it from the mains. ^ defrost the freezer compartment (depending on model), ^ clean the appliance out and ^ leave the door ajar to air the...
(climate ranges). Do not use in ambient temperatures for which it is not designed..For the refrigerator section We recommend a temperature of 5°C in the middle of the refrigerator..For the freezer...
The temperature display on the control panel always shows the required temperature. If you want the temperature in the refrigerator section to be 5 °C, ^ turn the temperature selector clockwise from 0 until the 5 lights up in the temperature display.
Super cool Super cool The Super cool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). Switching on Super cool Super cool is particularly recommended for faster chilling of large amounts of fresh food or drink.
The warmest area is in the top section of the door. Use this for storing butter and cheese. Coldest area The coldest area in a refrigerator is directly above the vegetable containers. Use this for all delicate and highly perishable food, e.g.
The freshness of food when first placed in the appliance is an important factor in determining how long it stays fresh. Time out of the refrigerator e.g. during transportation should be kept to a minimum. For example, do not allow food to stay in a hot car for too long.
Using the refrigerator efficiently Unpacked meats and vegetables Unpackaged meat and vegetables should be stored separately. To avoid any microbiological cross-contamination, these foods may only be stored together if they are wrapped. Protein rich foods Please note that foods rich in protein deteriorate faster than others.
Adjusting the interior fittings Moving the shelves The shelves can be adjusted according to the height of the food. ^ Raise the shelf, and pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level.
Freezing and storing food (depending on model) Using the freezer compartment Use the freezer compartment to: – store frozen food, – make ice cubes, – freeze small quantities of fresh food. Up to 2 kg of food can be frozen in 24 hours.
Freezing and storing food (depending on model) Home freezing Only freeze fresh food which is in a good condition. Hints on home freezing – The following types of food are suitable for freezing: Fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, pastry, leftovers, egg yolks, egg whites and a range of pre-cooked meals.
– in a microwave oven, – in an oven using the "Fan" or "Defrost" setting, – at room temperature, – in the refrigerator (the cold given off by the frozen food helps to keep the food cold), – in a steam oven.
Cooling drinks To cook drinks quickly, place them in the refrigerator section, and switch on the Super cool function. If placing drinks in the freezer compartment to cool them quickly,...
Refrigerator section The refrigerator defrosts automatically. Condensate and frost can build up on the back wall of the refrigerator section whilst it is in use. You do not need to remove this, as it will defrost and evaporate automatically with the warmth generated by the refrigerator.
Page 28
Defrosting To defrost Carry out the defrosting procedure as quickly as possible if food has not been placed in another freezer. The longer the food is left out at room temperature, the faster it defrosts. ^ Switch the appliance off. ^ Disconnect it from the mains.
A range of Miele branded cleaning and conditioning products is available to order from Miele or www.miele-shop.com. Do not let water get into the temperature selector or into the light. Do not let water get into the drainage channel and drain hole when cleaning.
Cleaning ^ Clean the interior shelves and drawers by hand. These are not suitable for cleaning in a dishwasher. ^ Clean the condensate channel and drain hole frequently, so that condensate can drain away unhindered. Use a straw or similar to clear the drain if necessary.
^ Check that the fuse is not defective and that the mains fuse has not blown. If it has, contact the Miele Ser- vice Department..the temperature in the refrigerator is too low.
Page 32
. . . the interior light in the refrigerator is not working. Has the refrigerator door been left open for too long? The lighting switches itself off automatically after approx. 15 minutes. If it also does not come on when the...
Page 33
^ Clean the condensate channel and drain hole. If you still cannot remedy the fault having followed these suggestions, please contact the Miele Service Department. To prevent unnecessary loss of temperature it is advisable not to open the doors while waiting for the appliance to be serviced.
Noises Normal noises Brrrrr... Blubb, blubb... Click... Sssrrrrr... Creak ... Remember that the noise of the compressor and the coolant circulating in the system is unavoidable. Noises that you can easily rectify Rattling, vibrating What causes them Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on.
– your Miele Dealer – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your appliance.
Electrical connection Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c.
This appliance must be built in, otherwise it could tip up. Location This appliance should be installed in a dry, well-ventilated room. It should not be installed where it is exposed to direct sunlight or directly adjacent to a heat-producing appliance such as an oven or a radiator.
Installation Before installing the appliance ^ Before installation remove the cover strip, sealing strip and other accessories from inside the appliance and from the external rear wall of the appliance. ^ Do not remove the spacers from the back of the appliance. These ensure the gap required between the back of the appliance and the wall is maintained.
Changing the door hinging Before building the appliance in, you will need to decide on which side the door is to be hinged. If left hand door hinging is required, follow the instructions below. To change the door hinging, you will need various sizes of Torx screwdrivers and a slotted screwdriver.
Freezer compartment door ^ Lower the cover on hinge plate a. ^ Unscrew hinge plate b, and remove freezer compartment door c together with the hinge plate. ^ Unscrew door catch d. ^ Screw door catch d into place on the opposite side, having turned it by 180 °.
Building in the appliance All building-in instructions given are for a right hand hinged appliance. If you have converted the appliance to left hand hinging you will need to adapt these instructions accordingly. Building into a peninsular run When built into a peninsular run, the rear of the building in niche must be fitted with a kitchen furniture panel.
Building in the appliance ^ Remove panel a. ^ Secure bracket b with screws c (4.8 x 16 mm). ^ Attach sealing strip d to the door opening side so that it sits flush at the front with the side of the appliance. If necessary the sealing strip can be trimmed to size along the lower edge of bracket b.
Page 44
Building in the appliance Securing the appliance and fitting the furniture door ^ Push the appliance against the housing wall on the side on which the door opens so that the sealing strip is pressed into the housing wall h. ^ Secure the appliance at the top with screw i (4 x 19 mm) into bracket b, pushing the appliance against the...
Page 48
Alteration rights reserved / 4710 M.-Nr. 07 923 420 / 00 K 9212 i, K 9214 iF, K 9412 i, K 9414 iF...