Table of Contents
Advertisement
6.4
Adaptec SCSISelect(TM) Utility!
(P5MT-S model only)
The Adaptec SCSISelect(TM) Utility allows you to create RAID 0, 1, and 0+1 set(s)
from SCSI hard disk drives connected to the SCSI connector supported by the
Adaptec embedded SCSI controller.
To enter the Adaptec SCSISelect(TM) Utility!:
1.
Turn on the system after installing all the SCSI hard disk drives.
2.
During POST, the Adaptec SCSI BIOS automatically detects the installed
SCSI hard disk drives and displays any existing RAID set(s). Press <Ctrl>
<A> to enter the utility.
3.
The utility auto-detects the available SCSI channels. Select the SCSI
channel, then press <Enter>.
ASUS TS300-E3/PA4 & PS4
6-31
Advertisement
Table of Contents
