hit counter script

Removing An Optical Disc; Using The Optical Drive; Listening To Audio Cd - Asus E2333 User Manual

Asus laptop - notebook pc user manual
Table of Contents

Advertisement

Optical Drive (Cont')

Removing an optical disc

Eject the tray and gently pry the edge of the disc
upwards at an angle to remove the disc from the
hub.

Using the Optical Drive

Optical discs and equipment must be handled with care because of the precise mechanics involved. Keep in
mind the important safety instructions from your CD suppliers. Unlike desktop optical drives, the Notebook
PC uses a hub to hold the CD in place regardless of the angle. When inserting a CD, it is important that the
CD be pressed onto the center hub or else the optical drive tray will scratch the CD.
WARNING! If the CD disc is not properly locked onto the center hub, the CD can be
damaged when the tray is closed. Always watch the CD closely while closing the tray
slowly to prevent damage.
A CD drive letter should be present regardless of the presence of a CD disc in the drive. After the CD is
properly inserted, data can be accessed just like with hard disk drives; except that nothing can be written to
or changed on the CD. Using the proper software, a CD-RW drive or DVD+CD-RW drive can allow CD-
RW discs to be used like a hard drive with writing, deleting, and editing capabilities.
Vibration is normal for all high-speed optical drives due to unbalanced CDs or CD print. To decrease vibration,
use the Notebook PC on an even surface and do not place labels on the CD.

Listening to Audio CD

The optical drives can play audio CDs, but only the DVD-ROM drive can play DVD audio. Insert the audio
CD and Windows™ automatically opens an audio player and begins playing. Depending on the DVD audio
disc and installed software, it may require that you open a DVD player to listen to DVD audio. You can
adjust the volume using hotkeys or Windows™ speaker icon on the taskbar.
Using the Notebook PC
Emergency eject
The emergency eject is located in a hole on the
optical drive and is used to eject the optical drive
tray in case the electronic eject does not work. Do
not use the emergency eject in place of the electronic
eject. Note: Make sure not to stab the activity
indicator located in the same area.
4
Actual location will
vary by model.
43

Advertisement

Table of Contents
loading

Table of Contents

Save PDF