14. TECHNICAL DATA..................... 22 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and • disconnect the mains plug from the mains socket.
ENGLISH 2.4 Use • Do not touch the glass of the door while a programme operates. The WARNING! glass can be hot. Risk of injury, electrical 2.5 Service shock, fire, burns or damage to the appliance. • To repair the appliance contact an Authorised Service Centre.
ENGLISH 5. PROGRAMME CHART Programme Programme description Temperature range (Type of load and soil level) Maximum load Maximum spin speed Cotton White cotton and coloured cotton. Normal soil and light soil. 90 °C - Cold 7 kg; 1200 rpm for model L 68270FL,L 68270VFL; 1400 rpm for model L 68470FL,L 68470VFL White cotton and colour-fast cotton.
Page 8
Programme Programme description Temperature range (Type of load and soil level) Maximum load Maximum spin speed Synthetic items to be gentle washed. Normal and light Easy Iron 60 °C - Cold soil. 1 kg; 800 rpm 1) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, these programmes are respectively the «Standard 60°C cotton programme»...
ENGLISH 6. CONSUMPTION VALUES The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient tempera- ture. At programme start the display shows the duration programme for the maximum load capacity.
Off Mode (W) Left On Mode (W) 0,48 0,48 The information given in the chart above are in compliance with the EU Commission regu- lation 1015/2010 implementing directive 2009/125/EC. 7. OPTIONS 7.1 Temp. Use this option for heavy soil.
ENGLISH 7.8 Finish In 7.9 Extra Rinse With this option you can set the number With this option you can add some rinses of hours in which you would like your to a washing programme. washing programme to be completed. Use this option for persons allergic to You can set from minimum 3 hours to detergents and in areas where the water...
Page 12
3. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum. 4. Close the door. 10.3 Detergent compartments Detergent compartment for washing phase. If you use liquid detergent,...
ENGLISH 10.4 Liquid or powder detergent • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid then the maximum level. •...
To cancel the Finish In option: If you set something a. Touch the button Start/Pause to incorrect, the display shows set the appliance to pause. The the message indicator of button Start/Pause flashes. 10.7 Starting a programme b. Touch the button Finish In until...
ENGLISH To open the door during the first • You must drain the water to open the minutes of the cycle (or when the door. Finish In operates) : Draining the water: 1. Touch the button Start/Pause to 1. To drain the water. pause the appliance.
• Wash with a special detergent heavy • To help the environment, do not use soil stains. more than the correct quantity of • Be careful with the curtains. Remove detergent. the hooks or put the curtains in a •...
ENGLISH Regularly examine the drum to prevent • Set the cotton programme with the limescale and rust particles. highest temperature with a small quantity of detergent. To remove rust particles use only special products for washing machine. Do this 12.4 Door seal separately from the laundry wash.
ENGLISH 12.7 Cleaning the inlet hose and the valve filter 45° 20° 12.8 Emergency drain 1. When you drain the water with the emergency drain procedure, you Because of a malfunction, the appliance must activate again the drain system: cannot drain the water. Put 2 litres of water in the main wash compartment of the detergent If this occurs, do steps (1) through (9) of...
12.9 Frost precautions 5. When the drain pump is empty, install the inlet hose again. If the appliance is installed in an area WARNING! where the temperature can be less than Make sure that the 0° C, remove the remaining water from temperature is more than 0 the inlet hose and the drain pump.
Page 21
ENGLISH Problem Possible solution Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter of the inlet hose and the filter of the valve are not clogged.
Problem Possible solution Set the drain or the spin programme if there is water in the drum. The appliance makes an Make sure the levelling of the appliance is correct. Refer to 'In- unusual noise. stallation'. Make sure that the packaging and/or the transit bolts are re- moved.
ENGLISH Cold water Water supply Maximum Load Cotton 7 kg Energy Efficiency Class A+++ Spin Speed Maximum 1200 rpm (L 68270FL,L 68270VFL) 1400 rpm (L 68470FL,L 68470VFL) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 15.