Method Of Setting The Service Adjustment Mode; White Balance Adjustments - Sony TRINITRON KV-20FV10 Service Manual
Hide thumbs
Also See for TRINITRON KV-20FV10:
- Operating instructions manual (41 pages) ,
- Operating instructions manual (38 pages) ,
- Operating instructions manual (41 pages)
Table of Contents
Advertisement
3-5. METHOD OF SETTING THE SERVICE
ADJUSTMENT MODE
Service Mode Procedure
1. Standby mode (power off).
2.
Display
Channel 5
on the Remote Commander (press each button within a
second).
Service Adjustment Mode In
1. The CRT displays the item being adjusted.
Disp.
( tem)
SERVICE
HSIZ
2. Press
or
on the Remote Commander to select the item.
3. Press
or
on the Remote Commander to change the
data.
4. Press
then
Service Adjustment Mode Memory
Turn set off then on to exit service adjustment mode.
SERVICE
WRITE
3-6. WHITE BALANCE ADJUSTMENTS
1. Input an entire white signal with burst.
2. Set to Service Adjustment Mode.
3. Set DCOL to "0".
4. Set the PICTURE and BRIGHTNESS to minimum.
5. Adjust with SBRT if necessary.
6. Select GCUT and BCUT with
7. Adjust with
and
for the best white balance.
8. Set PICTURE and BRIGHTNESS to maximum.
9. Select GDRV and BDRV with
10. Adjust with
and
for the best white balance.
11. Reset DCOL to "1".
12. To write into memory, press
+
Sound volume
Power
Item
Data
0
to save into the memory.
MUTING
Green
ENTER
Red
and
.
and
.
then
.
— 19 —
KV-20FV10/21FV10/21FV10C/25FV10A
Hide quick links:
Advertisement
Table of Contents
