Installation Instructions Hoods SAVE AND READ THESE INSTRUCTIONS TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI/UL 507 STANDARD FOR ELECTRIC FANS AND CAN/CSA-C22.2 NO. 113 STANDARD FOR FANS AND VENTILATORS. CONVENTIONS USED IN THESE INSTRUCTIONS WARNINGS: Must be followed carefully to avoid personal injury or damage. NOTES: Contain helpful hints and tips to facilitate the installation.
Page 2
Contact the nearest Vapors. 4) You can fight the fire with DACOR Authorized Servicer at your back to an exit. (800) 772-7778, or at www.dacor. 16. TO REDUCE THE RISK OF A com for examination, repair or RANGE TOP GREASE FIRE: adjustment.
(83x254mm) “A” “B” otherwise noted. Duct Model No. Overall Width Overall Depth 4" The specified minimum cabinet depth and width EHD3018 29 7/8” (102mm) must be provided. EHDR318 (759mm) EHD3618 35 7/8” Cabinet cutout dimensions must be used as EHDR3618 (911mm) indicated.
Electrical Conduit Locations NOTES: 1. Best performance is achieved 1 1/2" (38mm) by using round duct instead of "A" rectangular, especially when elbows are required. 7/8"ø (11mm) Holes 1 1/2" 2. If multiple elbows are needed, (38mm) ensure that there is a minimum of 24”...
The hood must be properly 3 1/4" x 10" 90û Elbow 3 1/4" x 10" 45û Elbow 3 1/4" x 10" Wall Cap 3 1/4" x 10" grounded at all times before 90û Flat Elbow power is applied. Do not ground the hood with the neutral (white) house supply wire.
Repeat the above test. If the appliance still does not work, contact an authorized DACOR service company at (800) 772-7778. Do not attempt to repair the appliance yourself. DACOR is not responsible for service required to correct a faulty installation.