Table of Contents
Advertisement
HCD-GTZ4/GTZ4i/GTZ5
SERVICE MANUAL
Ver. 1.1 2009.08
• HCD-GTZ4 is the amplifi er, USB, Disc player, tuner and
iPod section in MHC-GTZ4.
• HCD-GTZ4i is the amplifi er, USB, Disc player, tuner and
iPod section in LBT-GTZ4i, MHC-GTZ4i.
• HCD-GTZ5 is the amplifi er, USB, Disc player, tuner and
iPod section in MHC-GTZ5.
"WALKMAN" and "WALKMAN"
logo are registered trademarks of
Sony Corporation.
MICROVAULT is a trademark of
Sony Corporation.
MPEG Layer-3 audio coding technol-
ogy and patents licensed from Fraun-
hofer IIS and Thomson.
AUDIO POWER SPECIFICATION
POWER OUTPUT AND TOTAL HARMONIC
Windows Media is a registered trade-
DISTORTION:
mark of Microsoft Corporation in the
(HCD-GTZ4i: US model only)
United States and/or other countries.
With 6 ohm loads, both channels driven, from
120 Hz – 10 kHz; rated 110 watts per channel minimum RMS
power, with no more than 0.7% total harmonic distortion from
"Memory Stick" is a trademark of
250 miliwatts to rated output.
Sony Corporation.
Amplifier section
iPod is a trademark of Apple Inc., reg-
HCD-GTZ5
istered in the U.S. and other countries.
The following are measured at
Mexican model:
Other models:
Front speaker
Subwoofer
HCD-GTZ4i (US model)
The following are measured at AC 120 V 60 Hz
Front speaker
Subwoofer
HCD-GTZ4 / GTZ4i
(AEP, Australian, Argentina models)
The following are measured at
European model:
Other models:
Front speaker
Subwoofer
Sony Corporation
9-889-503-02
2009H05-1
Audio&Video Business Group
©
2009.08
Published by Sony Techno Create Corporation
AC 127 V, 60 Hz
AC 120, 220, 240 V, 50/60 Hz
Power output (rated): 110 W + 110 W
(at 6 , 1 kHz, 1% THD)
RMS output power (reference):
200 W + 200 W (per channel at 6 , 1 kHz, 10% THD)
RMS output power (reference): 200 W
(at 6 , 100 Hz, 10% THD)
RMS output power (reference):
RMS output power (reference): 180 W
AC 230 V, 50 Hz
AC 120, 220, 240 V, 50/60 Hz
Power output (rated): 90 W + 90 W
(at 6 , 1 kHz, 1% THD)
RMS output power (reference):
155 W + 155 W (per channel at 6 , 1 kHz, 10% THD)
RMS output power (reference): 150 W
(at 6 , 100 Hz, 10% THD)
Photo: HCD-GTZ5
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Block Name
SPECIFICATIONS
Inputs
PC (AUDIO IN) L/R:
Voltage 700 mV
impedance 47 kilohms
MIC: sensitivity 1 mV, impedance 10 kilohms
(USB) port: Type A
Outputs
PHONES: accepts headphones of 8
or more
FRONT SPEAKER: accepts impedance of 6
SUBWOOFER: accepts impedance of 6
USB section
Supported bit rate
MP3 (MPEG 1 Audio Layer-3):
32 – 320 kbps, VBR
WMA: 48 – 192 kbps
AAC: 48 – 320 kbps
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
Transfer speed
Full-Speed
Supported USB device
Mass Storage Class
Maximum current
500 mA
Disc player section
System
Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6 W
* This output is the value measurement at a distance of
200 mm from the objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Frequency response
20 Hz – 20 kHz
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 88 dB
Tuner section
FM stereo, FM/AM superheterodyne tuner
COMPACT DISC RECEIVER
US Model
AEP Model
Australian Model
HCD-GTZ4i
E Model
HCD-GTZ4/GTZ5
NEW
CDM88B-DVBU101
KHM-313CAB
FM tuner section
Tuning range:
North American model:
87.5 – 108.0 MHz (100 kHz step)
Other models:
87.5 – 108.0 MHz (50 kHz step)
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section
Tuning range
Pan American and Oceanian models:
530 – 1,710 kHz (with 10 kHz tuning interval)
531 – 1,710 kHz (with 9 kHz tuning interval)
European models:
531 – 1,602 kHz (with 9 kHz tuning interval)
Other models:
530 – 1,610 kHz (with 10 kHz tuning interval)
531 – 1,602 kHz (with 9 kHz tuning interval)
Antenna: AM loop antenna, external antenna terminal
Intermediate frequency: 450 kHz
iPod section
DC5V 500mA MAX
General
Power requirements
North American model: AC 120 V, 60 Hz
European models: AC 230 V, 50/60 Hz
Oceanian model: AC 230 – 240 V, 50/60 Hz
Mexican model: AC 127 V, 60 Hz
Argentine model: AC 220 V, 50/60 Hz
Other models: AC 120, 220 or 230 – 240 V, 50/60 Hz,
Adjustable with voltage selector
Power consumption
MHC-GTZ5: 250 W
HCD-GTZ4i (American model): 240W
MHC-GTZ4 / GTZ4i (Other models): 300 W
Dimensions (w/h/d) (excl. speakers)
Approx. 231 × 361 × 430.5 mm
(9 1/8 × 14 1/4 × 17 1/4 inch)
Mass (excl. speakers)
HCD-GTZ5 / GTZ4 / GTZ4i:
10.0 kg (22 lb 1 oz)
Design and specifications are subject to change without notice.
printed wiring boards.
Advertisement
Table of Contents
Related Manuals for Sony HCD-GTZ4
Summary of Contents for Sony HCD-GTZ4
-
Page 1: Specifications
Australian Model HCD-GTZ4i E Model HCD-GTZ4/GTZ5 • HCD-GTZ4 is the amplifi er, USB, Disc player, tuner and iPod section in MHC-GTZ4. • HCD-GTZ4i is the amplifi er, USB, Disc player, tuner and iPod section in LBT-GTZ4i, MHC-GTZ4i. • HCD-GTZ5 is the amplifi er, USB, Disc player, tuner and iPod section in MHC-GTZ5. -
Page 2: Table Of Contents
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN LASER product. This marking is located on THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. the rear exterior. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. -
Page 3: Servicing Notes
(LF) indicating the solder contains no lead. HCD-GTZ5: MX 4-124-494-3[] (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size) HCD-GTZ4: E2, E51 4-131-035-0[] HCD-GTZ4: AR 4-131-035-1[] : LEAD FREE MARK... -
Page 4: Disassembly Flow
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. 2-1. DISASSEMBLY FLOW 2-2. CASE (SIDE-L/R) (Page 4) 2-3. TOP CASE (Page 5) 2-4. FRONT PANEL BLOCK (Page 5) 2-5. DC FAN (M101) (Page 6) 2-6. -
Page 5: Top Case
HCD-GTZ4/GTZ4i/GTZ5 2-3. TOP CASE 2 Lift up the back side of top case. 1 screw (BVTP3 4 top case 3 two claws 2-4. FRONT PANEL BLOCK 5 wire (flat type) (11 core) (CN403) 8 two screws 9 two harness (BVTP3... -
Page 6: Dc Fan (M101)
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 2-5. DC FAN (M101) 3 three screws (GTZ4i: US) 6 two screws (BVTP3 8 screw plug (fan) (BVTP3 4 screw (BVTP3 9 DC fan (M/01) 1 fan connector (CN690) 8 screw plug (fan) 7 cover (fan) 5 screw... -
Page 7: Main Board
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 2-7. MAIN BOARD (EXCEPT GTZ4i: US) 7 fan connector (CN110) 8 connector (CN907) qa MAIN board 0 connector 2 connector (CN479) (CN1502) 4 wire (flat type) (9 core) (CN691) 3 wire (flat type) 5 wire (flat type) -
Page 8: Hub Board, Dmb19 Board
HCD-GTZ4/GTZ4i/GTZ5 2-9. HUB BOARD, DMB19 BOARD 1 two screws (BVTP3 qs two screws 9 connector (BVTP3 (DMB19 board: CN601) qa connector 6 flat (wire type) (DMB19 board: CN1105/ 8 flat (wire type) (7 core) (24 core) (CN101) HUB board: CN1500) -
Page 9: Optical Pick-Up Block (Khm-313Cab)
HCD-GTZ4/GTZ4i/GTZ5 2-11. OPTICAL PICK-UP BLOCK (KHM-313CAB) CD mechanism block (CDM88B-DVBU101) two insulator screws two insulator screws two insulators optical pick-up block two insulators (KHM-313CAB) connector holder BU four screws (BVTP2.6) wire (flat type) (24 core) 2-12. BELT (DLM3A) position of belt... -
Page 10: Test Mode
[DISC 1] button. The model information appears on the VOLUME MIN. fl uorescent indicator tube. “GTL 2S” or “GTL 2SI” is shown for HCD-GTZ4/GTZ4i, “GTL 3S” is shown for HCD-GTZ5. Check of amplifi er Press [DISC 1] button again to view the destination informa- Procedure: tion. - Page 11 HCD-GTZ4/GTZ4i/GTZ5 TUNER STEP CHANGE VACS DISPLAY This mode is used to check the VACS level. (Except AEP model) Procedure: The step interval of AM channels can be toggled between 9 kHz 1. Press [ STANDBY] button to turn on the system.
-
Page 12: Electrical Check
HCD-GTZ4/GTZ4i/GTZ5 SECTION 4 ELECTRICAL CHECK TUNER SECTION FM TUNE LEVEL CHECK signal generator Procedure: 1. Turn on the set. 2. Input the following signal from signal generator to FM antenna input directly. Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz... -
Page 13: Diagrams
HCD-GTZ4/GTZ4i/GTZ5 SECTION 5 DIAGRAMS 5-1. BLOCK DIAGRAM - RF SERVO, USB Section - D/A CONVERTER IC4602 L-OUT RF_IP GPIO 1 SDATA AOUT-L (Page 14) OPOUT GPIO 2 SCLK AOUT-R R-CH VOA/A RF_C GPIO 3 LRCK VOB/B RF_B GPIO 4 MCLK... -
Page 14: Block Diagram - Main Section
HCD-GTZ4/GTZ4i/GTZ5 5-2. BLOCK DIAGRAM - MAIN Section - RV700 MIC LEVEL J700 MIC AMP MIC AMP 46 MIC IC700 (1/2) IC700 (2/2) INPUT SELECTOR, ELECTRICAL VOLUME IC407 REC-L RECAL (Page 13) TONEOUTL 29 VOLINL OUTL (Page 15) J120 AUX-L PC IN... -
Page 15: Block Diagram - Amp Section
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 5-3. BLOCK DIAGRAM - AMP Section - J702 R-CH PHONES BASS AGC R-CH (Page 14) JK800 –1 LINE AMP IC252 – (Page 14) FRONT – SPEAKER –2 MUTING R-CH Q402 RY800 R-CH FAN MOTOR DRIVE M101 R-CH... -
Page 16: Block Diagram - Panel, Power Supply Section
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 5-4. BLOCK DIAGRAM - PANEL, POWER SUPPLY Section - PT901 MAIN POWER TRANSFORMER FLUORESCENT INDICATOR TUBE DRIVER SYSTEM CONTROLLER IC1101 IC401 (4/4) FLUORESCENT INDICATOR D908 FL-DRIVER-DATA TUBE –32V SG5/KS5 – –VFL REGULATOR FL-DRIVER-CLK FL1100 M+5V REGULATOR SG24/KS24... - Page 17 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. • Circuit Boards Location (In addition to this, the necessary note is printed in each block.) For Printed Wiring Boards. For Schematic Diagrams. Note: Note: • X : Parts extracted from the component side.
-
Page 18: Printed Wiring Board - Dmb19 Board
HCD-GTZ4/GTZ4i/GTZ5 5-5. PRINTED WIRING BOARD - DMB19 Board - • See page 17 for Circuit Boards Location. • : Uses unleaded solder. (Page 22) (Page 26) MAIN BOARD HUB BOARD DMB19 BOARD CN691 CN1500 (SIDE A) DMB19 BOARD (SIDE B) -
Page 19: Schematic Diagram - Dmb19 Board (1/3)
HCD-GTZ4/GTZ4i/GTZ5 5-6. SCHEMATIC DIAGRAM - DMB19 Board (1/3) - • See page 36 for Waveforms. • See page 36 for IC Block Diagrams. • See page 39 for IC Pin Function Description. DMB19 BOARD (1/3) IC B/D DVDD3.3V ASDATA0 (Page 20) -
Page 20: Schematic Diagram - Dmb19 Board (2/3)
HCD-GTZ4/GTZ4i/GTZ5 5-7. SCHEMATIC DIAGRAM - DMB19 Board (2/3) - DMB19 BOARD (2/3) R231 R232 REG02 R234 IOPMON FCS- DVDD3.3V FCS- FCS+ DMB19 REG01 FCS+ BOARD TRK+ R230 (1/3) DVDD5V TRK+ DMB19 CL213 TRK- (Page 19) R225 BOARD VREFO TRK- 100k (1/3) RF+3.3V... -
Page 21: Schematic Diagram - Dmb19 Board (3/3)
HCD-GTZ4/GTZ4i/GTZ5 5-8. SCHEMATIC DIAGRAM - DMB19 Board (3/3) - • See page 36 for IC Block Diagrams. DMB19 BOARD (3/3) DVDD3.3V DGND DMB19 BOARD DVDD5V (2/3) (Page 20) C604 R521 C608 R605 IC B/D C4603 C4608 C4606 IC4601 R606 A/D CONVERTER... -
Page 22: Printed Wiring Board - Main Board
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 5-9. PRINTED WIRING BOARD - MAIN Board - • See page 17 for Circuit Boards Location. • : Uses unleaded solder. M102 (FAN) ANTENNA FM 75 COAXIAL MAIN BOARD TUNER (GTZ4/GTZ4i: AEP, AUS/GTZ5) (FM/AM) JL259 JL305 JL306... -
Page 23: Schematic Diagram - Main Board (1/3)
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 5-10. SCHEMATIC DIAGRAM - MAIN Board (1/3) - • See page 36 for Waveforms. • See page 39 for IC Pin Function Description. MAIN BOARD (1/3) R483 D201 0 (GTZ4: AR/GTZ4i/GTZ5: MX, AR) MC2840-T112-1 (GTZ4/GTZ4i: US, AUS/GTZ5) -
Page 24: Schematic Diagram - Main Board (2/3)
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 5-11. SCHEMATIC DIAGRAM - MAIN Board (2/3) - • See page 36 for IC Block Diagrams. MAIN BOARD (2/3) CN410 JL142 JL143 SW8-OPEN JL144 SW5-STOCK JL145 SW6-CLOSE C135, 185 JL146 0.01 (GT4i: US/GTZ5) C698 Q640, 641, 643-648 0.015 (GTZ4/GTZ4i: AEP, AUS) -
Page 25: Schematic Diagram - Main Board (3/3)
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 5-12. SCHEMATIC DIAGRAM - MAIN Board (3/3) - • See page 36 for IC Block Diagrams. MAIN BOARD (3/3) R225, 226 4.7k (GTZ4/GTZ5: E2, E51, AR) 6.8k (GTZ4i/GTZ5: MX) R223, 224 CN220 2.2k (GTZ4i: US, AEP) (GTZ4/GTZ4i: AEP, AUS/GTZ5) 9P (GTZ4/GTZ4i: US, AUS/GTZ5) 2.7k (GTZ4: AUS/GTZ5: MX) -
Page 26: Printed Wiring Board - Hub Board
HCD-GTZ4/GTZ4i/GTZ5 5-13. PRINTED WIRING BOARD - HUB Board - • See page 17 for Circuit Boards Location. • : Uses unleaded solder. DMB19 BOARD CN1105 HUB BOARD HUB BOARD (SIDE B) (SIDE A) (Page 18) CN1500 ET1501 JL1506 JL1523 C1527... -
Page 27: Schematic Diagram - Hub Board
HCD-GTZ4/GTZ4i/GTZ5 5-14. SCHEMATIC DIAGRAM - HUB Board - • See page 36 for Waveforms. • See page 39 for IC Pin Function Description. HUB BOARD CN1502 R1546 JL1511 VBUS DET JL1512 JL1513 R1541 C1507 C1508 R1533 JL1514 100k JL1515 MAIN... -
Page 28: Printed Wiring Board - Power Amp Board
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 5-15. PRINTED WIRING BOARD - POWER AMP Board - • See page 17 for Circuit Boards Location. • : Uses unleaded solder. POWER AMP BOARD (CHASSIS) (GTZ4i: US/GTZ5) JL883 JL869 R842 JL802 R848 R843 C832 JL803 EP802... -
Page 29: Schematic Diagram - Power Amp Board
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 5-16. SCHEMATIC DIAGRAM - POWER AMP Board - POWER AMP BOARD (GTZ4i: US/GTZ5) (GTZ4/GTZ4i: AEP, AUS) IC800 IC800 POWER AMP POWER AMP IC800 IC800 STK416-120-E STK433-320-E +PRE +PRE D806 D810 1N5402-C532-2 1N5402-C532-2 D804 MAZ8160GMLS0 D805 MAZ8160GMLS0 (GTZ4i: US/GTZ5) -
Page 30: Printed Wiring Board - Display Board
HCD-GTZ4/GTZ4i/GTZ5 5-17. PRINTED WIRING BOARD - DISPLAY Board - • See page 17 for Circuit Boards Location. • : Uses unleaded solder. (Page 22) MAIN BOARD DISPLAY BOARD CN405 R1120 R1119 R1118 JW030 TP0025 R1167 R1168 R1169 S1131 S1130 S1129... -
Page 31: Schematic Diagram - Display Board
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 5-18. SCHEMATIC DIAGRAM - DISPLAY Board - • See page 36 for IC Block Diagrams. DISPLAY BOARD FL1100 FLUORESCENT INDICATOR TUBE CN1100 TP0001 SW_LED SW/USB_LED TP0002 USB LED CTRL TP0003 NO USE TP0004 TP0005 -VFL R1158 C1137... -
Page 32: Printed Wiring Boards - Panel Section
HCD-GTZ4/GTZ4i/GTZ5 5-19. PRINTED WIRING BOARDS - PANEL Section - • See page 17 for Circuit Boards Location. • : Uses unleaded solder. MIC BOARD USB BOARD JL703 TP728 JL717 JL720 JW1002 TP1026 R715 C721 NO700 JW7003 R714 C720 R716 ET700... -
Page 33: Schematic Diagram - Panel Section
HCD-GTZ4/GTZ4i/GTZ5 5-20. SCHEMATIC DIAGRAM - PANEL Section - USB BOARD MIC BOARD CN1001 NO1002 (USB) D1015 MAZ8068GMLS0 TP1007 TP1012 USB A+5V TP1006 TP1013 D- A USB A TP1005 TP1014 IC700 D+ A J700 TP1004 TP1015 BOARD USB A GND MIC AMP... -
Page 34: Printed Wiring Board - Trans Board
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 5-21. PRINTED WIRING BOARD - TRANS Board - • See page 17 for Circuit Boards Location. • : Uses unleaded solder. JL941 R915 JL942 JL914 R904 Q902 JL916 Q903 R911 D901 C909 JL943 RY901 JL938 C910 R952... -
Page 35: Schematic Diagram - Trans Board
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 5-22. SCHEMATIC DIAGRAM - TRANS Board - TRANS BOARD (GTZ4: E2, E51/GTZ5: E2, E51) S901 PT901 VOLTAGE MAIN POWER F909 SELECTOR TRANSFORMER T6.3AL JL919 250V CN908 230-240V 220V 120V W008 (GTZ4i: AUS) JL901 (GTZ4i: US/GTZ5) D901 F905... - Page 36 HCD-GTZ4/GTZ4i/GTZ5 • Waveforms • IC Block Diagrams – DMB19 Board – – MAIN Board – – HUB Board – – DMB19 Board – IC107 TK11133CSCL-G IC111 MM1661JHBE IC101 0 (XTALO) IC401 qa (XC-OUT) IC13 es (XTAL2) 8 7 6 5...
- Page 37 HCD-GTZ4/GTZ4i/GTZ5 – MAIN Board – IC407 R2A15216FP INDR REFERENCE INDL 6 INPUT 6 INPUT SELECTOR SELECTOR INER INEL (R-CH) (L-CH) INFR INFL GAMER GAMEL INGAINOUTR INGAINOUTL RECAR RECAL RECBR RECBL VOCAL CUT SURROUND OR DPL IN TRER TREL TONE TONE...
-
Page 38: Display Board
HCD-GTZ4/GTZ4i/GTZ5 – DISPLAY Board – IC1101 PT6324-Q CONTROL SERIAL DISPLAY DATA MEMORY INTERFACE DOUT SEGMENT DRIVER TIMING GENERATOR KEY MATRIX MEMORY SG24 GRID SG23 DRIVER DIMMING SG22 CIRCUIT SG1/KS1 SG21 SG2/KS2 SG20 SG3/KS3 SG19 SG18 SG4/KS4 14 15 16 17 18 19 20 21 22 23 24 25 26... - Page 39 HCD-GTZ4/GTZ4i/GTZ5 • IC Pin Function Description DMB19 BOARD IC101 CXD9968R (RF AMP, SERVO DSP, AUDIO PROCESSOR) Pin No. Pin Name Description RF_A RF main beam (C) input from the optical pick-up block RF_B RF main beam (B) input from the optical pick-up block...
- Page 40 HCD-GTZ4/GTZ4i/GTZ5 Pin No. Pin Name Description Bank address signal output to the SD-RAM DVSS18 Ground terminal Bank address signal output to the SD-RAM 81 to 83 RA10, RA0, RA1 Address signal output to the SD-RAM DVDD33 Power supply terminal (+3.3V)
- Page 41 HCD-GTZ4/GTZ4i/GTZ5 MAIN BOARD IC401 R5F3640DDFA (SYSTEM CONTROLLER) Pin No. Pin Name Description METER-IN3, 1, 2 Meter motor drive signal output to the meter display block METER-IN4 SW/USB CTRL LED drive signal output terminal for USB A and SUBWOOFER indicator “H”: LED on...
- Page 42 HCD-GTZ4/GTZ4i/GTZ5 Pin No. Pin Name Description Power supply terminal (+3.3V) ST-CE PLL chip enable signal output to the tuner (FM/AM) Ground terminal ST-DIN PLL serial data output to the tuner (FM/AM) ST-CLK PLL serial data transfer clock signal output to the tuner (FM/AM)
- Page 43 HCD-GTZ4/GTZ4i/GTZ5 HUB BOARD IC13 USB2512A-AEZG (USB CONTROLLER) Pin No. Pin Name Description USBDN1_DM, 1, 2 Audio serial data input from the USB A connector USBDN1_DP USBDN2_DM, 3, 4 Two-way audio serial data with the USB B connector USBDN2_DP VDDA33 Power supply terminal (+3.3V)
-
Page 44: Exploded Views
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 SECTION 6 EXPLODED VIEWS Note: • -XX and -X mean standardized parts, so • Color Indication of Appearance Parts Ex- The components identifi ed by mark 0 they may have some difference from the ample: or dotted line with mark 0 are critical for original one. -
Page 45: Loading Panel Section
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 6-2. LOADING PANEL SECTION back panel section DISPLAY board section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-124-214-01 PANEL, LOADING (GTZ5) 4-130-318-81 PANEL, LOADING (GTZ4i: US) 4-124-214-11 PANEL, LOADING (GTZ4) 4-124-214-51 PANEL, LOADING (GTZ4i: AEP) -
Page 46: Display Board Section
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 6-3. DISPLAY BOARD SECTION S1301 not supplied (VOLUME board) supplied with S1301 not supplied front panel section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-124-203-01 KNOB (VOLUME) 3-087-053-01 +BVTP2.6 (3CR) 4-124-204-01 HOLDER (JOG) -
Page 47: Front Panel Section
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 6-4. FRONT PANEL SECTION not supplied (HEADPHONE board) supplied not supplied (MIC board) not supplied (USB board) supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 2-895-507-01 KNOB (MIC) 4-225-252-01 CUSHION (FOOT) X-2345-051-2... -
Page 48: Back Panel Section
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 6-5. BACK PANEL SECTION (GTZ4i: US) not supplied M101 not supplied not supplied M101 not supplied not supplied (EXCEPT GTZ4i: US) MAIN board section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-828-952-11... -
Page 49: Main Board Section
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 6-6. MAIN BOARD SECTION (EXCEPT GTZ4i: US) not supplied not supplied (GTZ4i: US) M102 chassis section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-905-609-31 SCREW (TRANSISTOR) A-1717-230-A MAIN BOARD, COMPLETE (GTZ4i: AUS) -
Page 50: Chassis Section
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 6-7. CHASSIS SECTION not supplied (TRANS board) F908 (GTZ4i: US/GTZ5) F904 F905 F909 PT901 F907 F906 not supplied (GTZ4i: US) not supplied not supplied not supplied CD mechanism section (HUB board) (CDM88B-DVBU101) not supplied not supplied not supplied... -
Page 51: Cd Mechanism Section (Cdm88B-Dvbu101)
HCD-GTZ4/GTZ4i/GTZ5 6-8. CD MECHANISM SECTION (CDM88B-DVBU101) not supplied (including sled motor, spindle motor) not supplied (spindle motor) not supplied not supplied (sled motor) not supplied not supplied Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement. -
Page 52: Electrical Parts List
HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 SECTION 7 DISPLAY ELECTRICAL PARTS LIST Note: • Due to standardization, replacements in • CAPACITORS When indicating parts by reference num- the parts list may be different from the uF: μF ber, please include the board name. - Page 53 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 DISPLAY DMB19 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1120 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W S1121 1-771-410-21 SWITCH, TACTILE (PC) R1156 1-216-864-11 SHORT CHIP S1122 1-771-410-21 SWITCH, TACTILE (SUBWOOFER) R1158 1-216-841-11...
- Page 54 HCD-GTZ4/GTZ4i/GTZ5 DMB19 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C188 1-164-315-11 CERAMIC CHIP 470PF CN4602 1-784-859-51 CONNECTOR, FFC (LIF (NON-ZIF)) 7P C190 1-128-995-21 ELECT CHIP 100uF < DIODE > C191 1-107-826-11 CERAMIC CHIP 0.1uF C192 1-162-970-11 CERAMIC CHIP 0.01uF...
- Page 55 HCD-GTZ4/GTZ4i/GTZ5 DMB19 HEADPHONE Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R117 1-216-841-11 METAL CHIP 1/10W R1194 1-216-864-11 SHORT CHIP R118 1-216-801-11 METAL CHIP 1/10W R1248 1-216-295-91 SHORT CHIP R120 1-216-801-11 METAL CHIP 1/10W R1249 1-216-821-11...
- Page 56 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 HEADPHONE MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < FERRITE BEAD > R1502 1-216-833-11 METAL CHIP 1/10W R1503 1-216-815-11 METAL CHIP 1/10W R797 1-469-116-21 FERRITE, EMI (SMD) (1608) R1504 1-218-446-11 METAL CHIP...
- Page 57 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C109 1-126-964-11 ELECT 10uF C182 1-136-161-00 FILM 0.047uF C111 1-126-956-91 ELECT 0.1uF C183 1-162-970-11 CERAMIC CHIP 0.01uF (GTZ4/GTZ4i: AEP, AUS/GTZ5) C184 1-164-227-11 CERAMIC CHIP 0.022uF...
- Page 58 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C411 1-162-919-11 CERAMIC CHIP 22PF C414 1-100-597-91 CERAMIC CHIP 0.1uF < CONNECTOR > C416 1-104-655-91 ELECT 470uF 6.3V C422 1-165-176-11 CERAMIC CHIP 0.047uF * CN110...
- Page 59 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q452 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF IC603 6-701-761-01 IC uPC3533AHF Q500 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF IC675 6-713-627-01 IC BR24S16FJ -WE2 IC677 6-714-166-01 IC BD9701CP-V5 Q501 8-729-620-07 TRANSISTOR...
- Page 60 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R228 1-216-821-11 METAL CHIP 1/10W 0 R156 1-249-401-91 CARBON 1/4W R229 1-216-825-11 METAL CHIP 2.2K 1/10W (GTZ4/GTZ4i: AEP, AUS/GTZ5) R235 1-216-827-11 METAL CHIP 3.3K...
- Page 61 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R428 1-216-821-11 METAL CHIP 1/10W R554 1-216-797-11 METAL CHIP 1/10W R431 1-216-809-11 METAL CHIP 1/10W R555 1-216-797-11 METAL CHIP 1/10W R433 1-216-809-11 METAL CHIP...
- Page 62 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 MAIN POWER AMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R672 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W R675 1-216-833-11 METAL CHIP 1/10W C724 1-124-463-00 ELECT 0.1uF R677 1-216-821-11 METAL CHIP 1/10W < DIODE >...
- Page 63 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 POWER AMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C818 1-126-967-11 ELECT 47uF Q807 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF C819 1-126-967-11 ELECT 47uF Q808 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF C820 1-126-967-11 ELECT 47uF Q809 6-551-696-01 TRANSISTOR...
- Page 64 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 POWER AMP TRANS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C927 1-126-962-11 ELECT 3.3uF 0 C928 1-165-528-11 MYLAR 0.1uF 275V 0 R861 1-217-637-55 FUSIBLE 1/4W (GTZ4i: US) 0 R862 1-245-605-55 FUSIBLE 1/4W...
- Page 65 HCD-GTZ4/GTZ4i/GTZ5 Ver. 1.1 TRANS VOLUME Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < SWITCH > S1301 1-487-171-11 ROTARY ENCODER (MASTER VOLUME) ************************************************************* 0 S901 1-786-055-11 SELECTOR, VOLTAGE (VOLTAGE SELECTOR) (GTZ4: E2, E51/GTZ5: E2, E51) MISCELLANEOUS...
-
Page 66: Revision History
HCD-GTZ4/GTZ4i/GTZ5 REVISION HISTORY Checking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2009.05 2009.08...