Related Manuals for Samsung SHS-3320
Summary of Contents for Samsung SHS-3320
- Page 1 Samsung Smart Door Lock User Guide SHS-3320/3321 Please review all included documentation and use the product as intended. Safety precautions must be followed to avoid personal injury or property damage.
-
Page 2: Table Of Contents
��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� Introduction Congratulations on the purchase of your Samsung Smart Door Lock! Your lock has a touch sensitive number display pad and optionally a 13.56MHz Card reader. Up to 70 users can be registered to gain access with unique Codes or Access Cards (supports ISO14443A type). -
Page 3: Smart
Spec: FH+M4x8 Mechanical Keys Batteries User Manual RF Tag Samsung Smar t Door Loc k User Guid e SHS-3320/332 1 Note: Only for SHS-3320 Please review all included documentation and use the product as intended. Safety precautions must be followed to avoid personal injury or property damage. -
Page 4: Door Preparation
SHS-3320/3321 Smart Door Lock Door Preparation Step 1. Check the Door Status 1) This lock supports door thickness of 1-3/8” to 2-5/32” (35 to 55mm). 2) Using the provided lock template, ensure that there are no obstructions that would prevent installing the lock properly. - Page 5 SHS-3320/3321 Smart Door Lock Step 3. Drilling 1) D rill a 2-1/8˝ (54 mm) diameter hole through the door, as indicated on the template, using a hole saw. 2) Drill a 1˝ (25 mm) mortise hole using a hole saw. 3) Drill strike plate holes using a drill bit (1/8˝, 2.5 mm). 54mm ① 25mm ② 2.5mm ③ Step 4. Strike Plate Installation 1) Using the template, locate the center horizontal line for the deadbolt hole, which lines up with the center of the 2-1/8˝ hole, and draw a horizontal line...
-
Page 6: Preparing The Parts
SHS-3320/3321 Smart Door Lock Preparing the parts 1. Adjusting the length of the dead bolt Turn the body of the dead bolt to adjust the length of the dead bolt. It can be 60mm (2-3/8”) or 70mm (2-3/4”) 2. Changing the faceplate of the dead bolt Change the faceplate of the dead bolt following the size of a strike hole. -
Page 7: Installing Lock
SHS-3320/3321 Smart Door Lock Installing lock Outside Inside 1. Installing the Dead Bolt(E) 1. Before installation 1) Check the faceplate type of your door. 2) Make sure the deabolt directon as shown before inserting it into a door side. 2. Insert the deadbolt from the side of the door. - Page 8 SHS-3320/3321 Smart Door Lock 3. Installing the Mounting Plate 1. Detach the Interior Mounting Plate from the interior unit. 2. According to the right or left handed door, adjust the link, and attach the mounting plate. 3. Fasten the interior mounting plate with three TH+M5x40 (H2) 90% of the way.
- Page 9 OPTION : Connection for Video Intercom Connect the cable of video intercom to the Dry Contact Signal Interior Unit. SHS-3320/3321 receives 1 second of dry contact signal to open the door remotely. It is normally compatible with SHT-3006 and other Samsung Video Intercom systems.
-
Page 10: Setting Of Right-Handed / Left Handed
SHS-3320/3321 Smart Door Lock Setting of Right-Handed / Left Handed *All status should be checked while the dead bolt is in OPEN POSITION. Right-handed Left-handed Left Trigger Left Trigger Magnet sensor Tailpiece Tailpiece Link Thumb turn... -
Page 11: Programming
SHS-3320/3321 Smart Door Lock Programming Basic Lock Operation Overview Opening the Door with a PIN Code → The door opens within Touch the The touchscreen will illu- Enter the PIN Code and one second. [Touchscreen]. minate. (If the Random Se- press the [ ] button. -
Page 12: Programming Features & Definitions
SHS-3320/3321 Smart Door Lock Programming Features Outside Inside Touchscreen Registration Button Open/Close Button Card Reader Thumbturn Lever Magnetic Sensor Emergency Cylinder Battery Cover (SHS-3321 does not support.) Restart Button External Power Contact Symbols Description Symbols Description Press the [ ] button. It is Touch the [Touchscreen]. - Page 13 SHS-3320/3321 Smart Door Lock Symbols Description Symbols Description Enter the User PIN Code (4~12 Repeat the process inside digits). the rectangle. Press the [OPEN/CLOSE] Touch the Card reader with the User Card. button. Enter the User/Management Number. Can be set from 1 Sound Icon Display.
- Page 14 SHS-3320/3321 Smart Door Lock Definitions Double Authentication Mode : This mode requires both User Card and PIN Code to open the door, ensuring more security. However, Master PIN Code can open the door regardless of mode. To enable this mode, more than 1 User Card and PIN Code must be registered. This mode is disabled by default.
- Page 15 SHS-3320/3321 Smart Door Lock Random Security Function : This mode prevents the disclosure of the PIN Code by enter- ing the PIN Code after authenticating 2 arbitrarily selected numbers. When the buttons for 2 arbitrarily selected numbers are illuminated, pressing the 2 illuminated buttons illuminates the whole touchscreen.
-
Page 16: Programming User Pin Codes & User Cards
SHS-3320/3321 Smart Door Lock Programming User PIN Codes & User Cards Note: Pressing the [ ] button is only available while the door is open. Registration (Deadbolt must be unlocked.) Maximum number of user registration is 70. (User PIN Codes, User Cards, Key Fobs) - Page 17 SHS-3320/3321 Smart Door Lock Registering a User Card Enter a User Number (1~70) When the touchscreen is il- Open the battery cover to register the User Card code luminated, enter the current of the Interior Unit and Master PIN Code (default and press the [ ] button.
-
Page 18: Security Functions
SHS-3320/3321 Smart Door Lock Security Functions Setting the Out-of-Home Security Function When the door is closed Press the [ ] button within ] of the touchscreen will 3 seconds. light up. Ding dong dang Setting Double-locking Releasing Double-locking Press the [OPEN/... -
Page 19: Miscellaneous
SHS-3320/3321 Smart Door Lock Miscellaneous Miscellaneous Information Reset to Factory Default Resetting the lock will delete all registered information. Note: After Reset, let the sensor detect the magnet to set the hand type again. All registered Master and user data will be deleted, and the lock will be reset to default settings.(Refer to the Program section on Page 15 for default values.) -
Page 20: Troubleshooting
SHS-3320/3321 Smart Door Lock Troubleshooting When the lock doesn’t function correctly, please check the items below. If you can’t resolve the problem, please contact the nearest service center. Problem Resolution Reference ● C heck if the batteries are inserted in the correct polarity. There is no power. ● C heck that the batteries have a full charge. - Page 21 SHS-3320/3321 Smart Door Lock My PIN Code or Card is authenti- The lock may be malfunctioning. Please contact service cated, but the door center. won’t open. ● C heck if Auto Locking is set. When Manual Locking is set, touching the [Touchscreen] locks the door. The door won’t ● I f the door doesn’t lock automatically when Auto Locking lock automatically is set, then the lock has been installed incorrectly.
-
Page 22: User Registration Table
SHS-3320/3321 Smart Door Lock User Registration Table Management No. PIN CODE/CARD User Name Management No. PIN CODE/CARD User Name... -
Page 23: Product Specifications
SHS-3320/3321 Smart Door Lock Product Specifications Item Specifications Voltage 4 AA Alkaline 1.5V Batteries (LR6) (6V) Emergency Power 9V Battery (6LF22) (not included) Source Operation Method Electronic Control Method (PIN Code entry or Card reading) Weight 1.8Kg (including both inside and Exterior Unit) 68.0 mm (W) x 180.0 mm (H) x 36.5 mm (D) -
Page 24: Warranty
In no event shall SAMSUNG SDS be liable for an amount in excess of SAMSUNG SDS’s original selling price of the product, for any loss or damage, whether direct, indirect, incidental, consequential, or otherwise arising out of any failure of the product. -
Page 25: Warranty
Therefore, the installer should in turn advise the consumer to take any and all precautions for his or her safety including, but not limited to, fleeing the premises and calling police or fire depart- ment, in order to mitigate the possibilities of harm and/or damage. SAMSUNG SDS is not an insurer of either the property or safety of the user’s family or employees, and limits its liability for any loss or damage including incidental or consequential damages to SAMSUNG SDS’s original... - Page 26 SHS-3320/3321 Smart Door Lock...
-
Page 27: Drilling Template
Smart Drilling Template Sheet : 2-3/8″(60mm) Backset 5/32 Deep " Ø2-1/8 " Bore 1 "DIA. Latch Hole. 2-3/8 "... - Page 28 SHS-3320/3321 Smart Door Lock...
- Page 29 Smart Drilling Template Sheet : 2-3/4″(70mm) Backset Ø2-1/8" 5/32 Deep " Bore 1 "DIA. Latch Hole. 2-3/4"...
- Page 30 SHS-3320/3321 Smart Door Lock...
-
Page 31: Tailpiece Setting
SHS-3320/3321 Smart Door Lock Tailpiece Setting ��� Tailpiece drawing 1. Check the thickness of your door with our tailpiece drawing or a ruler. 2. According to your door thickness, cut and adjust the tailpiece as following way ; ex1) Thickness : 40mm 35 40 45 50 55 cutting point... - Page 32 SHS-3320/3321 Smart Door Lock...
- Page 33 SHS-3320/3321 Smart Door Lock MEMO...
- Page 34 SHS-3320/3321 Smart Door Lock MEMO...
- Page 35 SHS-3320/3321 Smart Door Lock...
- Page 36 Door Lock Product information and customer service contact SAMSUNG SDS SAMSUNG SDS Co.,Ltd., reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright © 2011, SAMSUNG SDS Co.,Ltd. All right reserved.