Page 14
Please read before operating your new Air Purifier Some odour ingredients absorbed by the filters may become separated and may be discharged through the air outlet and result in additional odour. Depending on the usage environment, especially when the product is used in a condition significantly more severe than household use, this odour may become strong in a shorter period than expected.
Page 15
*From that air is drawn through the filter system. Room size : 62m Thank you for purchasing the SHARP Air Pu- rifier. Please read this manual carefully. Be- fore using this product, be sure to read the section: “Important Safety Instructions.”...
Unplug the electrical cord before performing any maintenance. • If the power cord is damaged, it must be replaced by the manufacturer, its service agent, a Sharp authorized Service Centre or similarly qualified person in order to avoid a hazard.
CAUTIONS CONCERNING OPERATION • Do not block any opening. • Do not use the unit near or on hot objects, such as stoves or heaters or radiators. • Do not use the unit with the wrong position. • Always hold the handle on both sides of the unit when moving it. Holding the front panel when carrying may cause it to detach, thus dropping the unit and resulting in bodily injury.
PART NAMES ILLUSTRATIVE DIAGRAM Air Outlet Air Inlet Handle Main Unit HEPA Filter BACK Deodorizing Pre Filter Dust Sensor Date Label Power Cord Plug INCLUDED • Operation manual OP_FU-A80TA-TH+EN.indb 4 OP_FU-A80TA-TH+EN.indb 4 8/19/11 9:28:49 AM 8/19/11 9:28:49 AM...
MAIN UNIT DISPLAY 11 12 16 17 18 SHOWER Button / SHOWER Indicator Light (green) Plasmacluster ON / OFF Button / Plasmacluster ON / OFF Indicator Light (green) CHILD LOCK Button / CHILD LOCK Indicator Light (green) CLEAN SIGN The colour changes according to the air condition. Green Yellow Clean...
FILTER INSTALLATION Unplug the electrical cord before performing any maintenance. To maintain the quality of the filters, they are installed in the main unit and packed in plas- tic bags. Be sure to remove the filters from the plastic bags before using the unit. Remove the front Panel.
OPERATION Press to start / stop. CLEAN SIGN Unless the power cord has been unplugged, the operation starts in the previous mode it The Dust Sensor automatically moni- was operated in. tors dust pollution level and adjusts fan speed accordingly. Press to select fan speed.
MAINTENANCE Care Cycle : Whenever dust accumulates on the unit or every 1 month. CLEANING THE FILTERS CLEANING THE UNIT Turn off the unit, and unplug the Wipe with a dry, soft cloth. power cord. For stubborn stains or dirt, use a soft cloth dampened with warm water.
FILTER REPLACEMENT GUIDELINES Filter life varies depending on the room environment, usage, and location of the unit. If dust or odour persists, replace the filter. (Refer to “Please read before operating your new Air Purifier”) Replacement timing • HEPA filter About 2 years after opening •...
TROUBLESHOOTING Before calling for service, please review the Troubleshooting chart below, since the problem may not be a unit malfunctions. PROBLEM SOLUTION (not a malfunction) The unit leaves smoke and • Clean or replace the filters as needed. (Refer to E-9) odours in the air.