Chapter 4: Software Support; Installing An Operating System - Asus SABERTOOTH Z170 MARK 1 Manual
Hide thumbs
Also See for SABERTOOTH Z170 MARK 1:
- Instruction manual (140 pages) ,
- Accessory installation manual (10 pages)
Table of Contents
Advertisement
Chapter 4:
Software Support
Software Support
4.1
Installing an operating system
•
This motherboard supports 32-bit/64-bit Windows
Windows
•
Motherboard settings and hardware options vary. The setup procedures presented
in this chapter are for reference only. Refer to Windows
documentation for detailed information.
4.1.1
Windows
Based on the chipset specification, the 100 series requires USB 3.0 drivers to be preloaded
in order to use USB keyboard/mouse during Windows
on preloading USB 3.0 drivers and installing Windows
Method 1: Using SATA ODD & USB devices
Load USB 3.0 drivers using the ASUS support DVD and install Windows
device.
Requirement:
•
1 x ASUS support DVD
•
1 x Windows
•
1 x SATA ODD
•
1 x USB device (ODD or storage)
The USB storage device requires 8 GB or more capacity. It is recommended to format the
storage device before use.
1.
Insert the Windows
Windows
7 installation DVD to a USB storage device on a working system.
®
2.
Connect the USB ODD or USB storage device to your 100 series platform.
3.
Insert the ASUS support DVD into a SATA ODD on your 100 series platform.
4.
Power on your system and press F8 during POST (Power-On Self Test) to enter the
boot screen.
SABERTOOTH Z170 MARK 1
10 operating systems (OS).
®
7 and USB 3.0 driver for 100 Series
®
7 installation source
®
7 installation DVD into a USB ODD, or copy all files on the
®
7, 64-bit Windows
®
operating system
®
7 installation. This section is a guide
®
7.
®
7 using a USB
®
4
8.1, and 64-bit
®
4-1
- Quick Links:
- Motherboard Layout
- Jumpers
- Onboard Leds
Hide quick links:
Advertisement
Table of Contents
