Table of Contents
Advertisement
5.5.4
APM Configuration
APM Configuration
Restore on AC Power Loss
Resume On By PS/2 KB/MOUSE
Resume On Ring
Resume On PCI Devices
Resume On PCIE Devices
Resume On RTC Alarm
Restore.on.AC.Power.Loss.[Power.Off]
When set to.[Power.Off], the system goes into off state after an AC power loss.
When set to [Power.On], the system goes on after an AC power loss. When set to
[Last.State], the system goes into either off or on state, whatever the system state
was before the AC power loss. Configuration options: [Power Off] [Power On]
[Last State]
Power.On.By.PS/2.KB/Mouse.[Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 KB/mouse to
turn on the system. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume.On.Ring.[Disabled]
Allows you to enable or disable RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
Resume.On.PCI.Devices.[Disabled]
When set to [Enabled], this parameter allows you to wake the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume.On.PCIE.Devices.[Disabled]
When set to [Enabled], this parameter allows you to wake the system through a
PCI Express card. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume.On.RTC.Alarm.[Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. Configuration options: [Disabled]
[Enabled]
5-28
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
<Enter> to select
whether or not to
restart the system
after AC power
loss.
Chapter 5: BIOS setup
Advertisement
Table of Contents
