Sony STR-DA80ES Operating Instructions Manual page 27

Hide thumbs Also See for STR-DA80ES:

Table of Contents

2) The adjustment of this parameter does not affect the

level of the bass frequencies sent to the subwoofer

from the front, center, or rear channels via the bass

redirection circuitry. Setting this parameter to 0dB

outputs the full LFE signal at the mix level

determined by the recording engineer. Selecting

MUTE mutes the sound of the LFE channel from the

subwoofer. However, the low frequency sounds of

the front, center, and rear speakers are output from

the subwoofer according to the setting of each

speaker (page 20).

3) Setting this parameter to OFF reproduces the sound

track with no dynamic range compression. STD

reproduces the sound track with the full dynamic

range as intended by the recording engineer. MAX

provides a dramatic compression of the dynamic

range.

Resetting customized sound fields to the

factory settings

If the power is on, press POWER to turn off the

power.

Hold down SOUND FIELD and press POWER.

"SURR CLEAR!" appears in the display and all the

sound fields are reset at once.

Getting Started

Sound Adjustment

Table of Contents

Show Quick Links

Table of Contents