Makita 9564CR Technical Information
Angle grinders 115mm (4-1/2"), 125mm (5"), 150mm (6")
Hide thumbs
Also See for 9564CR:
- Instruction manual (100 pages) ,
- Instruction manual (76 pages) ,
- Instruction manual (12 pages)
Advertisement
Table of Contents
T
ECHNICAL INFORMATION
Model No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Models 9564CR/9564CVR, 9565CR/9565CVR, 9566CR/9566CVR
are upgraded sister tools of 9564C/9564CV, 9565C/9565CV,
9566C/9566CV, featuring anti-restart function for added safety.
S
pecification
Voltage (V)
110
120
220
230
240
Model No.
Wheel size:
mm (")
No load speed:
min.
rpm
-1 =
Super Joint System (SJS)
Constant speed control
Soft start
Electronic current limiter
Anti-restart function
Variable speed control by dial
Protection against electric shock
Power supply cord: m (ft)
Net weight: kg (lbs)
Weight according
EPTA-Procedure 01/2003*: kg
* with Wheel cover, Inner flange, Lock nut, Side grip; without Power supply cord
S
tandard equipment
Side grip (standard soft grip) ........ 1 (Anti-vibration grip instead if required)
Toolless wheel cover ..................... 1 (Standard type instead if required)
Lock nut wrench ........................... 1
Depressed center wheel ................ 1 (115-24 for 9564CR/9564CVR, 125-24 for 9565CR/9565CVR,
Note: The standard equipment for the tool shown above may differ by country.
O
ptional accessories
9564CR/ 9564CVR: Same optional accessories as available for 9564C/ 9564CV
9565CR/ 9565CVR: Same optional accessories as available for 9565C/ 9565CV
9566CR/ 9566CVR: Same optional accessories as available for 9566C/ 9566CV
9564CR/9564CVR, 9565CR/9565CVR, 9566CR/9566CVR
Angle Grinders 115mm (4-1/2"), 125mm (5"), 150mm (6")
Current (A)
Cycle (Hz)
13
13
6.7
6.4
6.1
9564CR
Diameter
115 (4-1/2)
Hole diameter
North America
10,500
Europe
11,000
Other countries
No
150-36 for 9566CR/9566CVR)
Model No.
Length (L)
Width (W)
Height (H)
Continuous Rating (W)
Input
50/60
1,400
50/60
---
50/60
1,400
50/60
1,400
50/60
1,400
9564CVR
9565CR
22.23 (7/8)
10,500
2,800 - 10,500
11,000
2,800 - 11,000
Yes
No
Double insulation
Australia, Chile, Brazil : 2.0 (6.6), Other countries: 2.5 (8.2)
2.2 (4.8)
2.2
H
W
Dimensions: mm (")
9564CR
9565CR
9564CVR
9565CVR
299 (11-3/4)
129 (5-1/8)
139 (5-1/2)
103 (4-1/16)
Output
840
840
840
840
840
9565CVR
9566CR
125 (5)
9,000
2,800 - 10,500
10,000
2,800 - 11,000
9,000
Yes
Yes
Yes
Yes
Yes
Yes
No
PRODUCT
P 1/ 9
L
9566CR
9566CVR
169 (6-5/8)
Max. Output (W)
1,800
2,000
2,100
2,100
2,100
9566CVR
150 (6)
4,000 - 9,000
4,000 - 10,000
4,000 - 9,000
Yes
2.3 (5.1)
2.3
Advertisement
Table of Contents
Related Manuals for Makita 9564CR
Summary of Contents for Makita 9564CR
- Page 1 Toolless wheel cover ..... 1 (Standard type instead if required) Lock nut wrench ......1 Depressed center wheel ....1 (115-24 for 9564CR/9564CVR, 125-24 for 9565CR/9565CVR, 150-36 for 9566CR/9566CVR) Note: The standard equipment for the tool shown above may differ by country.
- Page 2 Spiral bevel gear 9 (teeth: 12) Spiral bevel gear 35 (teeth: 35) [2] LUBRICATIONS Apply Makita grease SG No.0 and Disulfied molybdenum to the following portions designated with triangles to protect parts and product from unusual abrasion. Item No. Description...
- Page 3 (2) Remove Motor housing and Gear housing complete by loosening 4x18 Tapping screws (4pcs.). And then remove M6 Hex nut or Retaing ring S-6 from Armature as illustrated in Fig. 3. Fig. 3 M6 Hex nut Remove M6 Hex nut for 9564CR, 4x18 9564CVR, 9565CR and 9565CVR. Tapping screw (4pcs.)
- Page 4 Flat washer 6 Flat washer 12 (small) Gear housing Gear housing complete cover Flat wasehr 12 (large) M6 Hex. nut (for 9564CR, 9564CVR, 9565CR and Spindle 9565CVR) Flat Note: Instead of M6 Hex. nut, washer 7 Retaining ring S-6 is used...
- Page 5 P 5/ 9 epair [3]-2 Large Spiral Bevel Gear on Spindle and Ball Bearing 6201DDW DISASSEMBLING Note: When removing the above mentioned parts from Bearing box, it is not necessary to remove Gear housing complete from Motor housing. (1) Remove bearing box from Gear housing complete as illustrated in Fig. 10. Fig.
- Page 6 P 6/ 9 epair [3]-2 Large Spiral Bevel Gear on Spindle and Ball Bearing 6201DDW (cont.) DISASSEMBLING Fig. 13A Note: If it is difficult to remove Ball bearing 6201DDW Round bar Bearing box in the way shown in Fig. 13, for Arbor use Arbor press as illustrated Ball bearing...
-
Page 7: Circuit Diagram
P 7/ 9 ircuit diagram Fig. D-1 Color index of lead wires' sheath Black White Blue Brush holder Field viewed Switch lever from Rear side Switch lever cover side This Lead wire is white Brush for some countries. holder Switch block The dotted lines in Switch block are built in plate lead. -
Page 8: Wiring Diagram
P 8/ 9 iring diagram Fig. D-1 Motor housing (Bottom view) Dial of controller (for 9564CVR, 9565CVR and Fix Controller’s Lead wire 9566CVR only) (blue or white) and that of Switch lever (red) with this Lead wire holder. Controller’s Lead wire (blue or white) Field lead wire (red) Controller’s Lead wire... - Page 9 P 9/ 9 iring diagram Fig. D-3 Motor housing (right side view) Fix Controller’s lead wire (black) with Controller’s Lead wire of Power supply Lead wire holder Lead wire (black) cord (black or brown) Guide Lead wire of Power supply cord (black or brown) Lead wire holder between Strain relief and Rib.