hit counter script
Nokia Remote Camera User Manual
Nokia Remote Camera User Manual

Nokia Remote Camera User Manual

Nokia remote camera user guide

Advertisement

Nokia Remote Camera
User guide

Advertisement

Table of Contents
loading

Summary of Contents for Nokia Remote Camera

  • Page 1 Nokia Remote Camera User guide...
  • Page 2 Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided “as is”. Except as required by applicable...
  • Page 3: For Your Safety

    Remember to make back-up copies or keep a written record of all important information. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. Copyright © 2005 Nokia. All rights reserved.
  • Page 4: Table Of Contents

    4. User settings ...33 Define the master user...33 Add users...34 User settings... 36 Define the user settings with Remote Camera Manager ... 38 5. Configure the settings ...38 Camera settings ...38 Image and video settings... 38 Copyright © 2005 Nokia. All rights reserved.
  • Page 5 Establish a Bluetooth connection... 54 6. Light indicators... 55 7. Enhancements ... 57 8. Care and maintenance ... 57 9. Additional safety information ... 58 10. Technical specifications ... 61 11. List of commands ... 62 Copyright © 2005 Nokia. All rights reserved.
  • Page 6: Introduction

    I n t r o d u c t i o n 1. Introduction The Nokia Remote Camera is an imaging device with a motion detector, thermometer, and microphone. With the camera you can capture still images and video clips remotely, and send them to your multimedia messaging (MMS) enabled mobile phone, or to an e-mail address.
  • Page 7: About Your Camera

    Note: For availability, rates, and information on using SIM services, contact your SIM card vendor, e.g. network operator, service provider, or other vendor. Copyright © 2005 Nokia. All rights reserved. I n t r o d u c t i o n...
  • Page 8: Battery Information

    I n t r o d u c t i o n ■ Battery information The Nokia Remote Camera contains a back-up battery which is used when there is a mains power cut. Therefore, the camera is not switched off during a mains power cut, unless the back-up battery runs out.
  • Page 9: Wet And Damp Conditions

    ■ Wet and damp conditions The operating temperature for the device is -20ºC to +50ºC. You can use the device (including the Nokia power supply AC-12) in normal outdoor conditions within the limits of the operating temperature. Do not submerge the device in water. Do not install the device in places where it can get exposed to rain.
  • Page 10: Sales Package Contents

    Important: Do not connect the power supply to a mains outlet when damp or wet. ■ Sales package contents The sales package of the Nokia Remote Camera includes the following: • Nokia Remote Camera • Back-up battery BL-5C • Power supply AC-12 •...
  • Page 11: First Start-Up

    SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. Copyright © 2005 Nokia. All rights reserved. F i r s t s t a r t - u p...
  • Page 12 Wait for 15 seconds for the camera to start charging (the light indicator to blink green).The power supply also charges the back-up battery. Figure 6 Copyright © 2005 Nokia. All rights reserved. starts...
  • Page 13 6 Press the power button (1) for 2 seconds to switch on the camera. The light indicators scroll up and down (2). Figure 7 Warning: Do not switch on the Nokia Remote Camera when wireless phone use is prohibited or when it may cause interference or danger.
  • Page 14 Example: 6 Helen You are now set as the master user of the camera. See “User settings” on page 33. Copyright © 2005 Nokia. All rights reserved. is displayed. Wait for 3 seconds, and...
  • Page 15: Mount The Camera

    Do not place the camera in direct sunlight. The temperature of the camera may become too high. Do not expose the camera to rain. Copyright © 2005 Nokia. All rights reserved. F i r s t s t a r t - u p...
  • Page 16 Mount the camera on a wall or ceiling 1 Place the camera on the wall or ceiling, and attach it with the assembly kit available in the sales package. Copyright © 2005 Nokia. All rights reserved. Maximum detection width 3.5 metres...
  • Page 17 3 Turn the camera in the desired position, and tighten the screw. Mind the power cord when turning the camera. Figure 11 Copyright © 2005 Nokia. All rights reserved. F i r s t s t a r t - u p...
  • Page 18: Switch Off The Camera

    1 Find out the Bluetooth address of your phone from the user guide or the sales package of your phone. If you are using a Nokia mobile Copyright © 2005 Nokia. All rights reserved.
  • Page 19: Nokia Support On The Web

    The camera creates a Bluetooth connection to your mobile phone, and your phone starts downloading Remote Camera Manager from the camera. You can use and configure the camera with Remote Camera Manager. For further instructions, see the Remote Camera Manager help application.
  • Page 20: Basic Use

    3. Basic use You can operate the camera by sending text messages to the camera or with the Remote Camera Manager application. See “Download Remote Camera Manager” on page 18. Remote Camera Manager enables establishing a wireless Bluetooth connection between the camera and a mobile phone if they are within 10 metres of each other.
  • Page 21 To attach a message to the image, write the message at the end of the text message in quotation marks. Example: 1 8765432 "This is my new house!" Copyright © 2005 Nokia. All rights reserved. B a s i c u s e...
  • Page 22: Call The Camera

    If sending the image fails, the camera automatically tries to resend the image later. To capture an image with Remote Camera Manager, start the Remote Camera Manager application on your mobile phone, select Imaging, and select whether to capture a still image or record a video clip. You can ask the camera to send the image to your mobile phone or to another mobile phone or e-mail address.
  • Page 23 You can operate the motion detector with text messages or Remote Camera Manager. If the temperature surrounding the camera rapidly changes, for example, when moving the camera indoors to outdoors, motion detection may not function properly. To avoid this, let the camera adjust to the temperature for 30 minutes before activating motion detection.
  • Page 24 The camera automatically tries to resend the images later. The camera sends various notifications to the master user, for example, when a power cut occurs. See “Notification settings” on page 44. Copyright © 2005 Nokia. All rights reserved. deactivation time...
  • Page 25: Motion Detection Settings

    (5), still image and video clip (6), or text message, still image, and video clip (7); and send the following text message to the camera: number of type Copyright © 2005 Nokia. All rights reserved. B a s i c u s e...
  • Page 26 To see the current motion detection settings of the camera, send the following text message to the camera: To see the value of a single motion detection setting, send the following text message to the camera: number of the setting Copyright © 2005 Nokia. All rights reserved.
  • Page 27: Use Motion Detection With Remote Camera Manager

    2 ? 6 Use motion detection with Remote Camera Manager To use motion detection with Remote Camera Manager, select Motion detection from the main menu. You can set motion detection on and off, choose recipients for motion detection messages, and select the type for motion detection notifications.
  • Page 28 If the camera uses the 24 hour clock, use the 24-hour format in the commands as well. See “Time and date settings” on page 42. In one message you can define 1-3 different times when images are captured. Copyright © 2005 Nokia. All rights reserved.
  • Page 29: Timed Imaging Settings

    To set off timed imaging, send the following text message to the camera: Timed imaging settings To send timed images to another recipient, send the following text message to the camera: Copyright © 2005 Nokia. All rights reserved. B a s i c u s e...
  • Page 30 Example: 4 5 2 The default type is still image. To see the current timed imaging settings of the camera, send the following text message to the camera: Copyright © 2005 Nokia. All rights reserved.
  • Page 31: Use Timed Imaging With Remote Camera Manager

    4 ? 1 Use timed imaging with Remote Camera Manager If you want to use timed imaging with Remote Camera Manager, select Timed imaging from the main menu. You can set timed imaging on and off, select whether to capture images or video clips, and choose the camera users to whom the timed images are sent.
  • Page 32: Thermometer Settings

    The SIM card in the camera determines which temperature scale is used: Celsius or Fahrenheit. To change the temperature scale, select Celsius (1) or Fahrenheit (2), and send the following text message to the camera: number of scale Copyright © 2005 Nokia. All rights reserved.
  • Page 33: Use The Thermometer With Remote Camera Manager

    Use the thermometer with Remote Camera Manager If you want to use the thermometer with Remote Camera Manager, select Thermometer from the main menu. To see the temperatures in the camera premises during the last 24 hours, select Options > Current temperature.
  • Page 34: Add Users

    To check the information of the master user, send the following text message to the camera: master user passcode If there is no master user defined, this command does not function. ■ Add users indicates a space. Copyright © 2005 Nokia. All rights reserved. user name phone number e-mail...
  • Page 35 To check the information of a user, send the following text message to the camera: user name or phone number Copyright © 2005 Nokia. All rights reserved. U s e r s e t t i n g s e-mail address...
  • Page 36: User Settings

    • Select the motion detection type (still image, video clip, or text message). • Select the timed imaging type (still image or video clip). To set on the normal access mode, send the following text message to the camera: Copyright © 2005 Nokia. All rights reserved.
  • Page 37 To set the e-mail address as the address where all images are sent, send the following text message to the camera: user name or phone number Copyright © 2005 Nokia. All rights reserved. U s e r s e t t i n g s...
  • Page 38: Define The User Settings With Remote Camera Manager

    7 Jane ? By default, images are sent to phone numbers. Define the user settings with Remote Camera Manager If you want to change the user information in the camera, select Settings > Users. To see the current user list, select Options >...
  • Page 39 To set the zoom on, send the following text message to the camera: Copyright © 2005 Nokia. All rights reserved. C o n f i g u r e t h e s e t t i n g s...
  • Page 40: General Camera Settings

    By default, the zoom is off. Tip: If you are using Remote Camera Manager, you find these settings in Settings > Camera. If you want to check the current camera settings, select Options > Get current settings. When you have made all the necessary configurations, select Options >...
  • Page 41 To clear the message counter, send the following text message to the camera: Copyright © 2005 Nokia. All rights reserved. C o n f i g u r e t h e s e t t i n g s...
  • Page 42: Time And Date Settings

    By default, the camera selects the time format automatically. To check the current time from the camera, send the following text message to the camera: To set the date of the camera, send the following text message to the camera: yyyy Copyright © 2005 Nokia. All rights reserved.
  • Page 43 By default, the automatic time update is off. Copyright © 2005 Nokia. All rights reserved. C o n f i g u r e t h e s e t t i n g s...
  • Page 44: Notification Settings

    C o n f i g u r e t h e s e t t i n g s Tip: If you are using Remote Camera Manager, select Settings > Time settings. When you have made all the necessary configurations, select Options >...
  • Page 45: Security Settings

    To set off user authentication, send the following text message to the camera: Copyright © 2005 Nokia. All rights reserved. C o n f i g u r e t h e s e t t i n g s...
  • Page 46: Pin Code Settings

    The camera stores the PIN code in its memory, and uses it automatically in later start-ups. To set on the PIN code query, send the following text message to the camera: PIN code Copyright © 2005 Nokia. All rights reserved. new PIN code...
  • Page 47: Connection Settings

    You get the service number and service text from your network operator. The MMS settings of the Nokia Remote Camera are the same as those of the Nokia 7610 phone. Copyright © 2005 Nokia. All rights reserved.
  • Page 48: Access Point Settings

    To discard the new settings, send the following text message to the camera: Tip: If you are using Remote Camera Manager, select Settings > Connection. Access point settings You only need to configure the access point settings manually if the automatic MMS settings of the camera do not function, and your operator does not support sending the settings over the air.
  • Page 49 To obtain a list of defined access points, send the following text message to the camera: Copyright © 2005 Nokia. All rights reserved. C o n f i g u r e t h e s e t t i n g s...
  • Page 50 To check the current SMTP access point, send the following text message to the camera: Tip:If you are using Remote Camera Manager, select Settings > Connection. To see the current camera connection settings, select for example MMS settings > Options > Get current settings.
  • Page 51: Internet E-Mail Settings (Smtp)

    To set the password for the SMTP connection, send the following text message to the camera: password Copyright © 2005 Nokia. All rights reserved. C o n f i g u r e t h e s e t t i n g s...
  • Page 52: Gsm Network Settings

    C o n f i g u r e t h e s e t t i n g s To check the current e-mail settings, send the following text message to the camera: Tip: If you are using Remote Camera Manager, select Settings > Connection. To set the bearer for multimedia messages, select MMS for sending...
  • Page 53: Configure The Camera With A Pc

    ■ Configure the camera with a PC If you want to configure the camera with PC software, you can download the Nokia Remote Camera PC Configurator software at www.nokia.com. PC Configurator supports the Windows 2000/XP operating system, and requires 15 MB of free disk space. To use PC Configurator, you need a compatible PC that connects to the camera Copyright ©...
  • Page 54: Establish A Cable Connection

    If this does not work, do the following: 1 Send the following text message to make the Bluetooth radio of the camera visible: 2 Open the Bluetooth device discovery application on your PC. The Copyright © 2005 Nokia. All rights reserved.
  • Page 55: Light Indicators

    Signal strength status The signal strength LED Green: Good signal strength Copyright © 2005 Nokia. All rights reserved. L i g h t i n d i c a t o r s shows the status of the GSM network:...
  • Page 56 To set off the light indicators of the camera, send the following text message to the camera: To set on the light indicators of the camera, send the following text message to the camera: Copyright © 2005 Nokia. All rights reserved. Status Red & green Insert SIM card...
  • Page 57: Enhancements

    • Nokia Mobile Charger LCH-12: multi-voltage charger that plugs into the cigarette lighter and charges the camera battery. • Nokia Battery BL-5C: Li-Ion based battery that provides power in a thin and light package. • Nokia Connectivity Cable DKU-2: a USB cable for connecting a compatible PC and the camera.
  • Page 58: Additional Safety Information

    Use the device only in its normal operating positions. To maintain compliance with radio frequency exposure guidelines only use enhancements approved by Nokia for use with this device. Medical devices...
  • Page 59 Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. Vehicles Do not install the camera in a vehicle. Do not use the Nokia Remote Camera or your mobile phone to control or configure the camera while driving; park the vehicle first.
  • Page 60 They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders. Copyright © 2005 Nokia. All rights reserved.
  • Page 61: Technical Specifications

    Protection class Environmental class Copyright © 2005 Nokia. All rights reserved. T e c h n i c a l s p e c i f i c a t i o n s Reduced functionality: +40ºC to +50ºC 4%...100%...
  • Page 62: List Of Commands

    24 hours Set the temperature notification on and define the low and high temperature limits Set temperature notification off Check the value of a setting Copyright © 2005 Nokia. All rights reserved. Message activation time deactivation time...

Table of Contents