Troubles In The Recording And Playback Mode - Sony DCR-TRV250 Operating Instructions Manual
Hide thumbs
Also See for DCR-TRV250:
- Operating instructions manual (268 pages) ,
- Specifications (2 pages) ,
- Service manual (147 pages)
Table of Contents
Advertisement
Types of trouble
and how to correct trouble
Symptom
Cause and/or Corrective Action
Your camcorder
does not function
• The battery
pack is not installed,
or is dead oi' nearly dead.
even when the POWER switch is set
") Install a charged
battery
pack {p. 18, 19).
to a position other than OFF {CHG).
• The AC Adaptor
is not connected
to a wall outlet.
-) Connect
the AC Adaptor
to a wall outlet (p. 24).
The end search function does not
• The tape was qfected after recording.
work.
• You have not recorded
on the new cassette yet.
The end search function does not
• The tape has a blank portion
at the beginning
or midway.
work correctly.
The battery pack is quickly
• The operating
temperature
is too low.
dischm'ged.
• The battery
pack is not charged
enough.
-) Charge the battery
pack fully again (p. 19).
• The battery
pack is completely
dead, and cannot be
recharged.
-) Replace with a new battery
pack (p. 18).
The remaining battery time indicator
• You have used the battery
pack in an extremely
hot or
does not indicate the correct time.
cold environment
for a long time.
• The battery
pack is completely
dead, and cannot be
recharged.
÷ Replace with a new battery
pack (p. 18).
• The battery
is dead.
") Use a fully charged
battery
pack (p. 18, 19).
• A deviation
has occurred
in the remaining
battery
time.
-) Charge
the battery
pack fully so that the remaining
battery
time indicator
indicates
correct time (p. 19).
• A deviation
has occurred
in the remaining
battery
time.
-) Charge
the battery
pack fully so that the remaining
battery
time indicator
indicates
correct time (p. 19).
The power goes off ahhough
the
remaining
battery time indicator
indicates that the battery pack has
enough power to operate.
The cassette cannot be removed from
• The power
source is disconnected.
the holder.
-) Connect
it firmly (p. 18, 24).
• The battery
is dead.
-) Use a charged
battery
pack (p. 18, 19).
The [] and _ indicator's flash and no
• Moisture
condensation
has occurred.
functions except for cassette ejection
") Remove the cassette
and leave your camcorder
for at
work.
least one hour to acclimatize
(p. 247).
The remaining tape indicator is not
• The _
REMAIN
is set to AUTO in tbe menu settings.
displayed.
") Set it to ON to always
display
the remaining
tape
indicator.
g_E_
g
227
- Quick Links:
- Main Features
Hide quick links:
Advertisement
Table of Contents
