Optional accessories Connecting cables RK-74A, RK-G69HG, The ( ) SRS (SOUND RETRIEVAL SYSTEM) is VMC-10HG, VMC-720M, manufactured by Sony Corporation under license VMC-810S/820S, YC-15V/30V, from SRS Labs, Inc. It is covered by U.S. Patent No. TV Stand SU-32FD1, SU-36FD1 4,748,669. Other U.S. and foreign patents pending.
SECURITE DU FONCTIONNEMENT. NE LES REMPLACER QUE PAR THESE COMPONENTS WITH SONY PARTS WHOSE PART DES COMPOSANTS SONY DONT LE NUMERO DE PIECE EST INDIQUE NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN DANS LE PRESENT MANUEL OU DANS DES SUPPLEMENTS PUBLIES SUPPLEMENTS PUBLISHED BY SONY.
Page 4
KV-32FV1/34FVL1/36FV1 SAFETY CHECK-OUT After correcting the original service problem, perform the LEAKAGE TEST following safety checks before releasing the set to the The AC leakage from any exposed metal part to earth ground customer: and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microampere).
Label color ANT on your remote control. White ....TV/VTR (VCR)/DVD/DBS VOL + /– CH + /– Notes (Direct Broadcast Satellite)/ • Your Sony remote control can be scrambled CABLE operation buttons TO CONVERTER channels CODE SET CODE SET Yellow ....PIP operation buttons programmed to operate your cable box.
Connecting and Installing the TV (continued) DBS Connections DVD Player Connections (Rear of TV) (Rear of TV) For optimum picture quality, use S VIDEO instead of the yellow A/V cable. S Video does For optimum picture quality, use S VIDEO VIDEO IN VIDEO IN Connecting a DBS (Direct...
GUIDE Shows you network/station information buttons. SYSTEM The SYSTEM OFF button allows you to power off all Sony equipment at once. presented using either half or the whole screen. TV/VTR • The AUX input cannot be viewed in the Press to change the channel in the window picture.
Using Your New TV (continued) Using Your Menus Press V or v to move to the desired option. Press V or v to make your selection and Learning menu selection press SET UP Use the MENU button to access a menu and Use the Yellow Labeled Buttons for PIP Operations CHANNEL SET UP use the arrow buttons (V or v) to alter settings.
2 Press V or v to move the cursor to 1, 2, 3, 4 or 5 and press 314, 336, 337, 345, 346, 347 Toshiba 312, 311 operate Sony or non-Sony video equipment. Kenwood 314, 336, 332, 337 Wards 327, 328, 335, 331, 332 3 Press V or v to access the desired channel and press Press CODE SET.
(see page 24) (see page 21) If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Direct Response Center at 1-800-222-SONY (7669)(U.S. residents only) or (416) 499-SONY (7669)(customers in Canada only).
KV-32FV1/34FVL1/36FVL1 2-6. PICTURE TUBE REMOVAL WARNING K board BEFORE REMOVING ANODE CAP Chassis assy H.V. remains in the CRT even after the power is disconnected. Degaussing coil Discharge CRT before attempting to remove the anode cap to avoid elec- C board trical shock.
KV-32FV1/34FVL1/36FV1 SECTION 3 SET-UP ADJUSTMENTS Perform the adjustments in order as follows: The following adjustments should be made when a complete realignment is required or a new picture Beam Landing tube is installed. Convergence Focus These adjustments should be performed with rated Screen (G2)/White Balance power supply voltage unless otherwise noted.
KV-32FV1/34FVL1/36FV1 3-2. CONVERGENCE Preparation: • Before starting, perform FOCUS, V. LIN and V. SIZE adjustments. • Set BRIGHTNESS control to minimum. • Input dot pattern. (1) Vertical and Horizontal Static Convergence Operation of BMC (Hexapole) Magnet The respective dot positions resulting from moving each magnet interact, so perform adjustment while tracking.
KV-32FV1/34FVL1/36FV1 ( 2 ) Dynamic Convergence Adjustment 3-4. SCREEN (G2) • Before starting, perform Horizontal and Vertical Input dot pattern from the pattern generator. Static Convergence Adjustment. Set the PICTURE and BRIGHT controls at normal. Slightly loosen deflection yoke screw. Adjust S BRT, G CUT, B CUT in service mode with an 2.
KV-32FV1/34FVL1/36FV1 SECTION 4 SAFETY RELATED ADJUSTMENTS R530, R531 CONFIRMATION METHOD (HOLD-DOWN CONFIRMATION) AND READJUSTMENTS Always perform the following adjustments when replacing the following components marked with a ] mark on the schematic diagram: dejital digital multimeter multimeter A BOARD: IC351, IC501, D519, D520, D521, C531, C532, R387, R529, R530, R531, R532, R533, R550, T503 G BOARD:...
KV-32FV1/34FVL1/36FV1 SECTION 5 CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENT BY REMOTE COMMANDER Use Remote Commander (RM-Y167) to perform the following circuit adjustments: NOTE : Test Equipment Required: 1. Pattern Generator 2. Frequency Counter 3. Digital Multimeter 4. Audio OSC (1) Setting the Service Adjustment Mode (2) Memory Write Confirmation Method 1.
Page 18
KV-32FV1/34FVL1/36FV1 (4) Service Data (1/4) Register Data Initial Average Name Description Length Data Data COMMENT VP CXA2095AS VPOS V-Position 0-63 Adjust VSIZ V-Size 0-63 Adjust PVSZ V-Size 0-63 Adjust VCOM V-Compensation VLIN V-Linearity 0-15 Adjust VSCO S-Correction 0-15 Adjust HPOS H-Position 0-15 Adjust...
Page 19
KV-32FV1/34FVL1/36FV1 Service Data (2/4) Register Data Initial Average Name Description Length Data Data Adj/Fix uPD6488 67 CGAN CGAIN 0, 1 68 AVAP AVAPON 0, 1 69 M S MS0/MS1 0- 2 70 YDLL YDELAY-L 71 HRD8 HRD08 0, 1 72 HRD7 HRD00-07 0-255 73 DYCO...
Page 20
KV-32FV1/34FVL1/36FV1 Service Data (3/4) Register Data Initial Average Name Description Length Data Data Adj/Fix PP SAB9076 125 SMT6 SMART6 0, 1 126 SKP6 SKIP6 0, 1 127 BGHP BGhfp 0-15 Adjust 128 BGVP BGvfp 0-15 Adjust 129 MAHP MAhfp 0-15 Adjust 130 MAVP MAvfp...
Page 21
KV-32FV1/34FVL1/36FV1 Service Data (4/4) Register Data Initial Average Name Description Length Data Data Adj/Fix IC CXA2019 190 ICYC CV/YC (Fix by model) 191 IHUE 0-63 192 ICOL COLOR 0-63 193 ISCO SUB CONT 0-15 Adjust(FD7) 194 ISCL SUB COLOR 0-15 Adjust(FD7) 195 ISHU SUB HUE...
Page 22
KV-32FV1/34FVL1/36FV1 (5) Feature ID Map 3 2 F V 1 1 3 9 1 7 3 3 2 F V 1 1 3 9 1 7 3 3 4 F V L 1 6 4 1 7 1 1 7 3 3 6 F V 1 1 3 9 1 7 3 3 6 F V 1...
Page 23
KV-32FV1/34FVL1/36FV1 V. SIZE ADJUSTMENT ( VSIZ) VS CORRECTION (VSCO) 1. Input a monoscope signal. 2. Set to Service adjustment mode. 3. Select VSIZ with 4. Adjust with for the best vertical size. PIN AMP (PAMP) 5. Write into the memory by pressing then V.
Page 24
KV-32FV1/34FVL1/36FV1 4. Connect an oscilloscope to CN351 pin 3 on A board. P&P SUB COLOR, SUB HUE ADJUSTMENT (MCOL, MSHU, ICOL, ISHU) 5. Set to Service Mode and select 2COL and 2HUE with 1. Input a 75% Color-bar signal. 6. Adjust with for 2COL and 2HUE so that even 2.
Page 25
KV-32FV1/34FVL1/36FV1 BACKGROUND POSITION ADJUSTMENT P&P OSD ADJUSTMENT (PDPS) (BGHP, BGVP) 1. Input a monoscope signal. NOTE: Prior to this adjustment, the P&P ACQUISITION 2. Set to channel INDEX mode. ADJUSTMENT must be performed (see previous page). 3. Adjust so right side edge of P&P OSD is 1 ~ 2 characters from border.
KV-32FV1/34FVL1/36FV1 SECTION 6 DIAGRAMS 6-1. CIRCUIT BOARDS LOCATION 6-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS • All capacitors are in µF unless otherwise noted. pF : µµF 50WV or less are not • All voltages are in V. S : Measurement impossibillity. indicated except for electrolytics and tantalums.
Page 27
(FROM FBT) FRONT VIDEO 2 FROM CN641 CN1765 CN1232 CN1231 PWR ON DRIVER TO FBT G2 Q648 FRONT C FRONT C J1232 T605 CN641 CN1641 FOCUS T601&T602 TO FBT PIN JACL(L TYPE) CN602 PIN 5 TO FBT FOCUS FRONT FRONT Y FRONT Y AC WHITE +B RECT...
Page 38
WA BOARD IC VOLTAGE LIST WA BOARD TRANSISTOR VOLTAGE LIST IC961 IC963 volt volt Q943 11.6 Q963 Q944 11.6 Q966 Q945 Q967 Q946 134.3 67.2 134.9 Q968 11.6 Q947 67.2 Q969 11.3 Q961 Q981 Q962 Q1961 11.6 All voltages are in V IC964 volt WA BOARD TRANSISTOR...
Page 39
WA BOARD (*) MARK LIST KV-32FV1 KV-34FVL1 KV-36FV1 R2967 240K 1/10W 220K 1/10W...
Page 41
C BOARD TRANSISTOR VOLTAGE LIST C BOARD IC VOLTAGE LIST IC1761 IC1762 IC1763 Q1761 volt volt volt All voltages are in V 212.0 212.2 212.0 144.0 147.2 146.0 146.0 149.6 147.8 143.0 145.9 145.0 All voltages are in V...
Page 45
PIN JACL(L TYPE) FRONT VIDEO2 CN1232 WHT-L :S-MICRO J1232 FRONT FRONT D1233 R1233 FRONT MTZJ-T-77-10B 4.7k PROT :CHIP J1231 FRONT-SW FRONT FRONT BOARD CN1231 C1234 R1235 R1236 4.7k 470k :CHIP :CHIP C1235 R1237 R1238 4.7k 470k :CHIP :CHIP IC2001 SBX1981-51 DETECTOR CN2001 WHT-L...
Page 46
TO A BOARD CN1002 REMOTE SENSOR, CN2002 WHT-L R2015 LED, :S-MICRO :CHIP POWER R2013 R2012 R2010 R2014 R2011 4.7k 1.8k :CHIP :CHIP :CHIP :CHIP :CHIP S2007 POWER S2006 S2005 S2004 S2003 S2002 S2001 SET UP TV/V VOL+ VOL-...
Page 47
IC1461 TA8216H AUDIO AMP AUDIO R1474 R1475 C1472 JR1401 C1470 :CHIP 0.47 :CHIP C1464 :MPS JR5203 R1461 :CHIP CN1462 2.2k C1478 C1461 C1477 R IN R IN C1465 :CHIP :CHIP F:CHIP C1467 JR1402 PS1461 :S-MICRO C1475 R1482 R1462 R OUT 2200 :CHIP :CHIP...
Page 48
C3301 C3302 0.01 :CHIP PIP ENCODE CHROMA DECODE DY IN Y IN Y OUT DV IN U OUT TO A BOARD V OUT DU IN CN3301 V IN U IN C3363 C3362 C3364 R3378 0.01 X3304 1.5k :CHIP DVD SW 3.58MHz :CHIP :CHIP...
Page 49
P BOARD TRANSISTOR P BOARD IC VOLTAGE LIST VOLTAGE LIST IC3302 volt Q3301 Q3302 Q3305 Q3306 IC3303 Q3307 volt IC3304 Q3310 volt Q3312 Q3314 All voltages are in V IC3308 volt -3.0 All voltages are in V...
KV-32FV1/34FVL1/36FV1 SECTION 7 EXPLODED VIEWS • Items with no part number and no • The component parts of an assembly • Items marked " " are not stocked description are not stocked because are indicated by the reference numbers in since they are seldom required for routine they are seldom required for routine service the remarks column.
KV-32FV1/34FVL1/36FV1 SECTION 8 ELECTRICAL PARTS LIST Note: RESISTORS • All resistors are in ohms The components identified by shading REF.NO. PART NO. DESCRIPTION • Items marked " REMARK " are not stocked since REF.NO. PART NO. DESCRIPTION • REMARK F : nonflammable and mark ¡...
Page 58
KV-32FV1/34FVL1/36FV1 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ sont critiques pour la securite. Ne les remplacer are critical for safety. Replace only with part number specified.
Page 59
KV-32FV1/34FVL1/36FV1 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ sont critiques pour la securite. Ne les remplacer are critical for safety. Replace only with part number specified.
Page 60
KV-32FV1/34FVL1/36FV1 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK JR002 1-216-295-91 SHORT Q359 8-729-216-22 TRANSISTOR 2SA1162-G JR003 1-216-295-91 SHORT Q360 8-729-422-27 TRANSISTOR 2SD601A-Q JR052 1-216-295-91 SHORT Q361 8-729-422-27 TRANSISTOR 2SD601A-Q JR053 1-216-295-91 SHORT Q362 8-729-422-27 TRANSISTOR 2SD601A-Q Q363 8-729-216-22 TRANSISTOR 2SA1162-G JR054 1-216-295-91 SHORT...
Page 62
KV-32FV1/34FVL1/36FV1 Note: Note: The components identified by shading The components identified with have been carefully and mark ¡ ¡ ¡ ¡ ¡ are critical for safety. factory-selected for each set in order to satisfy regula- Replace only with part number specified. tions regarding X-ray radiation.
Page 64
KV-32FV1/34FVL1/36FV1 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ sont critiques pour la securite. Ne les remplacer are critical for safety. Replace only with part number specified.
Page 67
KV-32FV1/34FVL1/36FV1 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ sont critiques pour la securite. Ne les remplacer are critical for safety. Replace only with part number specified.
Page 68
KV-32FV1/34FVL1/36FV1 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ sont critiques pour la securite. Ne les remplacer are critical for safety. Replace only with part number specified.
Page 69
KV-32FV1/34FVL1/36FV1 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ sont critiques pour la securite. Ne les remplacer are critical for safety. Replace only with part number specified.
Page 70
KV-32FV1/34FVL1/36FV1 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK CONNECTOR R1774 1-215-903-11 METAL OXIDE 2W F R1775 1-249-422-11 CARBON 2.7K 1/4W CN1761* 1-564-509-11 PLUG, CONNECTOR R1776 1-215-903-11 METAL OXIDE 2W F R1777 1-260-099-11 CARBON 1/2W CN1763 1-695-915-11 TAB (CONTACT) CN1764* 1-564-508-11 PLUG, CONNECTOR R1778...
Page 71
KV-32FV1/34FVL1/36FV1 HF HX WA REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R1236 1-216-113-00 RESISTOR 470K 1/10W C954 1-137-364-11 FILM 0.001MF R1237 1-216-065-91 RESISTOR 4.7K 1/10W C955 1-107-667-11 ELECT 2.2MF 160V R1238 1-216-113-00 RESISTOR 470K 1/10W C956 1-137-364-11 FILM 0.001MF R2001 1-216-041-00 RESISTOR...