Nokia Customer Care
Bluetooth LOCALS window, write the 12-digit serial number on the
6. In the
Counterpart BT Device Address line.
This needs to be done only once provided that JBT-9 is not changed.
7. Place the JBT-9 box near (within 10 cm) the BT antenna and click Run BER Test.
Results
Bit Error Rate test result is displayed in the
Bluetooth self tests in Phoenix
Steps
Phoenix service software.
1. Start
2. ChooseFile→Scan Product.
3. Place the phone to a flash adapter.
4. From the Mode drop-down menu, set mode to Local.
5. Choose Testing→Self Tests.
Self Tests window check the following Bluetooth related tests:
6. In the
• ST_LPRF_IF_TEST
• ST_LPRF_AUDIO_LINES_TEST
• ST_BT_WAKEUP_TEST
Page 6 –52
Bit Error Rate (BER) Tests pane in the Bluetooth LOCALS window.
Figure 52 BER test result
COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
BB Troubleshooting and Tuning Guide
RM-180
Issue 1