Table of Contents
Advertisement
Leveling the Mower Deck from Side to
Side
1. Loosen the side nut and jam nut in the yokes you want
to adjust
(Figure
78).
Figure 78
1. Top bolt
2. Jam nut
3. Yoke
2. Rotate the top bolt of the yokes to adjust the height of
the mower deck
(Figure
Note: Rotate the bolts clockwise to raise the deck;
rotate the bolt counterclockwise to lower it.
3. Tighten the jam nuts and side bolts.
4. Check the side-to-side height; refer to
Mower Deck Side-to-Side Height (page
4. Side nut
5. Adjust these yokes to
adjust the right side of the
mower deck.
6. Adjust these yokes to
adjust the left side of the
mower deck.
78).
Checking the
50).
Checking the Mower Deck Front-to-Rear
Pitch
1. Adjust the tire pressure in the rear tires to the correct
specifications.
2. Position 1 blade front-to-rear. Measure at A and B
locations from a level surface to the cutting edge of
the blade tips
(Figure
Note: The mower blade should be 6 mm (1/4 inch)
lower in front at A than in the rear at B.
3. Rotate the blades and repeat for other blades.
1. Measure the blade at
points A and B
4. If the front-to-rear pitch is not correct, refer to
the Mower Deck from Front to Rear (page
51
79).
Figure 79
2. Measure from a level
surface
52).
Leveling
Hide quick links:
Advertisement
Table of Contents
