Sound Power; Sound Pressure; Vibration - Toro 30626 Operator's Manual
2 & 4 wheel drive traction units
Hide thumbs
Also See for 30626:
- Operator's manual (56 pages) ,
- Operator's manual (48 pages) ,
- Operator's manual (56 pages)
Table of Contents
Advertisement
object injuries. Do not resume mowing until the
area is cleared.
Maintenance and Storage
• Make sure all hydraulic line connectors are tight and
all hydraulic hoses and lines are in good condition
before applying pressure to the system.
• Keep your body and hands away from pin hole
leaks or nozzles that eject hydraulic fluid under
high pressure. Use paper or cardboard, not your
hands, to search for leaks. Hydraulic fluid escaping
under pressure can have sufficient force to penetrate
the skin and cause serious injury. Seek immediate
medical attention if fluid is injected into skin.
• Before disconnecting or performing any work on
the hydraulic system, all pressure in the system must
be relieved by stopping the engine and lowering the
deck and attachments to the ground.
• Check all fuel lines for tightness and wear on a
regular basis. Tighten or repair them as needed.
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the deck,
attachments, and any moving parts, especially the
screen at the side of the engine. Keep everyone away.
• If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
• Use only Toro approved attachments and
replacement parts. The warranty may be voided if
used with unapproved attachments.
Sound Power
This unit has a guaranteed sound power level of 105
dBA, based on measurements of identical machines per
ISO 11094.
Sound Pressure
This unit has a maximum sound pressure level at the
operator's ear of 89 dBA, based on measurements of
identical machines per EN 836 and ISO 11201.
Vibration
This unit does not exceed a hand/arm vibration level of
2.5 m/s2, based on measurements of identical machines
per EN 836 and EN 1033.
This unit does not exceed a whole body vibration
level of 0.5 m/s2, based on measurements of identical
machines per EN 836 and EN 1032.
7
- Quick Links:
- Adjusting Pto Drive Belt Tension
Hide quick links:
Advertisement
Table of Contents
