Maintenance; Recommended Maintenance Schedule(S) - Toro 74919TE Operator's Manual
Hide thumbs
Also See for 74919TE:
- Operator's manual (68 pages) ,
- Operator's manual (72 pages) ,
- Operator's manual (80 pages)
Table of Contents
Advertisement
Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 8 hours
After the first 100 hours
After the first 250 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 200 hours
Every 250 hours
Every 300 hours
Every 500 hours
Monthly
Yearly
Yearly or before storage
Important: Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
• Change the engine oil.
• Check the wheel lug-nut torque.
• Check the wheel-hub slotted-nut torque.
• Check the parking-brake adjustment (check every time you remove or replace a
brake component).
• Change the hydraulic filters and hydraulic oil.
• Check the safety system.
• Check the engine-oil level.
• Check the seat belt.
• Check the rollover-protection-system (ROPS) knobs.
• Clean the engine screen and the oil cooler.
• Check and clean the hydraulic unit shrouds.
• Inspect the blades.
• Clean the mower deck.
• Grease the mower-deck spindles and idler arm.
• Check spark arrester (if equipped).
• Check the tire pressure.
• Inspect the belts for cracks and wear.
• Check the hydraulic oil level.
• Lubricate the mower-deck-lift pivots.
• Change the engine oil (more often in dirty or dusty conditions).
• Check, clean, and gap the spark plug.
• Check and clean engine cooling fins and shrouds.
• Change the engine-oil filter.
• Replace the primary air filter (more often in dusty or sandy conditions).
• Check the safety air filter.
• Change the hydraulic filters and hydraulic oil when using Mobil® 1 oil (more often in
dirty or dusty conditions).
• Check and adjust the valve clearance. See an Authorized Service Dealer.
• Replace the safety air filter.
• Replace the fuel filter (more often in dirty or dusty conditions).
• Check the wheel lug-nut torque.
• Check the wheel-hub slotted-nut torque.
• Adjust the caster-pivot bearing.
• Check the parking-brake adjustment.
• Change the hydraulic filters and hydraulic oil when using Toro® HYPR-OIL™ 500
hydraulic oil (more often in dirty or dusty conditions).
• Check the battery.
• Grease the pump-belt idler arm.
• Grease the front caster pivots (more often in dirty or dusty conditions).
• Repack the front caster-wheel bearings (more often in dirty or dusty conditions).
• Lubricate the caster-wheel hubs.
• Paint chipped surfaces.
• Check all maintenance procedures listed above before storage.
33
Advertisement
Table of Contents
