Table of Contents
Advertisement
Available languages
Available languages
Quick Links
INSTALLATION INSTRUCTIONS FREESTANDING
ELECTRIC RANGE WITH DOUBLE OVENS
INSTRUCTIONS D'INSTALLATION POUR
CUISINIÈRE ÉLECTRIQUE AUTOPORTANTE AVEC
RANGE SAFETY .............................................................................1
INSTALLATION REQUIREMENTS .................................................2
Tools and Parts .............................................................................2
Location Requirements ................................................................2
Electrical Requirements - U.S.A. Only .........................................4
Electrical Requirements - Canada Only .......................................5
INSTALLATION INSTRUCTIONS ...................................................5
Unpack Range..............................................................................5
Adjust Leveling Legs ....................................................................5
Install Anti-Tip Bracket .................................................................6
Electrical Connection - U.S.A. Only .............................................7
Verify Anti-Tip Bracket Is Installed and Engaged ......................12
Level Range ................................................................................12
Complete Installation .................................................................13
Moving the Range ......................................................................13
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT:
Save for local electrical inspector's use.
IMPORTANT :
À conserver pour consultation par l'inspecteur local des installations électriques.
W10575959B
FOURS DOUBLES
Table of Contents/Table des matières
RANGE SAFETY
Your safety and the safety of others are very important.
SÉCURITÉ DE LA CUISINIÈRE ...................................................14
EXIGENCES D'INSTALLATION ...................................................15
Outils et pièces ...........................................................................15
Exigences d'emplacement .........................................................15
Spécifications électriques ..........................................................17
INSTRUCTIONS D'INSTALLATION .............................................17
Déballage de la cuisinière ..........................................................17
Réglage des pieds de nivellement .............................................17
Installation de la bride antibasculement ....................................18
installée et engagée ...................................................................18
Réglage de l'aplomb de la cuisinière .........................................19
Achever l'installation ..................................................................20
Déplacement de la cuisinière .....................................................20
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Advertisement
Table of Contents
Related Manuals for Whirlpool W10575959B
Summary of Contents for Whirlpool W10575959B
-
Page 1: Table Of Contents
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. IMPORTANT: Save for local electrical inspector's use. IMPORTANT : À conserver pour consultation par l'inspecteur local des installations électriques. W10575959B... -
Page 2: Installation Requirements
WARNING Tip Over Hazard A child or adult can tip the range and be killed. Install anti-tip bracket to floor or wall per installation instructions. Slide range back so rear range foot is engaged in the slot of the anti-tip bracket. Re-engage anti-tip bracket if range is moved. -
Page 3: Product Dimensions
Product Dimensions Cabinet Dimensions Cabinet opening dimensions shown are for 25" (63.5 cm) countertop depth, 24" (61.0 cm) base cabinet depth, and 36" (91.4 cm) countertop height. IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface. -
Page 4: Electrical Requirements - U.s.a. Only
Electrical Requirements - U.S.A. Only If codes permit and a separate ground wire is used, it is If connecting to a 4-wire system: recommended that a qualified electrical installer determine that This range is manufactured with the ground connected to the the ground path and wire gauge are in accordance with local neutral by a link. -
Page 5: Electrical Requirements - Canada Only
Electrical Requirements - Canada Only WARNING Range Rating* Specified Rating of Power Supply Cord Kit and Circuit Protection 120/240 Volts 120/208 Volts Amps 8.8 - 16.5 KW 7.8 - 12.5 KW 40 or 50** 16.6 - 22.5 KW 12.6 - 18.5 KW * The NEC calculated load is less than the total connected load Electrical Shock Hazard listed on the model/serial/rating plate. -
Page 6: Install Anti-Tip Bracket
Install Anti-Tip Bracket 3. Determine and mark edge of range in the cutout space. The WARNING mounting bracket can be installed on either the left side or right side of the cutout. Position mounting bracket in cutout so that right (or left) edge of the bracket is "... -
Page 7: Electrical Connection - U.s.a. Only
Electrical Connection - U.S.A. Only Power Supply Cord Direct Wire WARNING WARNING Electrical Shock Hazard Electrical Shock Hazard Disconnect power before servicing. Disconnect power before servicing. Use 8 gauge copper or 6 gauge aluminum wire. Use a new 40 amp power supply cord. Electrically ground range. - Page 8 Style 2: Direct wire strain relief Feed the flexible conduit through the strain relief, ■ allowing enough slack to easily attach wiring to the Use Phillips screwdriver to remove screws and slide cord/ ■ terminal block. conduit plate down and out. Tighten strain relief screw against the flexible conduit.
- Page 9 5. Use " nut driver to connect the neutral (white) wire to the 4-Wire Connection: Power Supply Cord center terminal block post with one of the 10-32 hex nuts. Use this method for: New branch-circuit installations (1996 NEC) ■ Mobile homes ■...
- Page 10 2. Use " nut driver to connect the neutral (white) wire to the 4-Wire Connection: Direct Wire center terminal block post with one of the 10-32 hex nuts. Use this method for: New branch-circuit installations (1996 NEC) ■ Mobile homes ■...
- Page 11 4. Attach terminal lugs to line 1 (black), neutral (white), and line 3-Wire connection: Direct Wire 2 (red) wires. Loosen (do not remove) the setscrew on the front of the terminal lug and insert exposed wire end through Use this method only if local codes permit connecting ground bottom of terminal lugs.
-
Page 12: Verify Anti-Tip Bracket Is Installed And Engaged
Bare Wire Torque Specifications 2. Slowly attempt to tilt the range forward. Attaching terminal lugs to the terminal block - 20 lbs-in. (2.3 N-m) If you encounter immediate resistance, the range foot is engaged in the anti-tip bracket. Wire Awg Torque 3. -
Page 13: Complete Installation
If removing the range is necessary for cleaning or maintenance: Complete Installation For power supply cord-connected ranges: 1. Slide range forward. 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was 2. -
Page 14: Sécurité De La Cuisinière
SÉCURITÉ DE LA CUISINIÈRE Votre sécurité et celle des autres est très importante. Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer. Voici le symbole d’alerte de sécurité. -
Page 15: Exigences D'installation
EXIGENCES D’INSTALLATION Outils et pièces Exigences d'emplacement Rassembler les outils et composants nécessaires avant IMPORTANT : Observer les dispositions de tous les codes et d’entreprendre l’installation. Lire et observer les instructions règlements en vigueur. fournies avec chacun des outils de la liste ci-dessous. C’est à... - Page 16 Dimensions du produit Dimensions du placard Les dimensions de l’espace d’installation entre les placards sont valides pour l’installation entre des placards de 25" (63,5 cm) de profondeur avec plan de travail de 24" (61,0 cm) de profondeur et 36" (91,4 cm) de hauteur. IMPORTANT : En cas d'installation d'une hotte ou d'un ensemble hotte/micro-ondes au-dessus de la cuisinière, suivre les instructions fournies avec la hotte ou l'ensemble hotte/...
-
Page 17: Spécifications Électriques
Spécifications électriques AVERTISSEMENT Spécifications électriques Intensité nominale pour la cuisinière* spécifiée du cordon d’alimentation et de la protection du circuit 120/240 volts 120/208 volts Ampères 8,8 - 16,5 KW 7,8 - 12,5 KW 40 ou 50** 16,6 - 22,5 KW 12,6 - 18,5 KW Risque de choc électrique * La charge NEC calculée est inférieure à... -
Page 18: Installation De La Bride Antibasculement
4. Percer deux trous de " (3,0 mm) qui correspondent aux Installation de la bride antibasculement trous de la bride selon la méthode de montage déterminée. Voir ci-dessous.. AVERTISSEMENT Montage au plancher Montage au mur Risque de basculement Un enfant ou une personne adulte peut faire basculer la cuisinière, ce qui peut causer un décès. -
Page 19: Réglage De L'aplomb De La Cuisinière
3. Si l'arrière de la cuisinière se soulève de plus de ½" (1,3 cm) Réglage de l'aplomb de la cuisinière du plancher sans opposer de résistance, cesser d'incliner la cuisinière et la reposer doucement sur le plancher. 1. Placer une grille dans le four. Le pied de la cuisinière n'est pas engagé... -
Page 20: Achever L'installation
6. Pour vérifier que la bride est bien engagée, consulter la section “Vérifier que la bride anti-basculement est bien installée et engagée”. 7. Vérifier que la cuisinière est d'aplomb. /™ ©2016. Used under license in Canada. All rights reserved. ® W10575959B Utilisé sous licence au Canada. Tous droits réservés. 8/16...