Related Manuals for Siemens WM12K268IN
Summary of Contents for Siemens WM12K268IN
- Page 1 Washing machine WM10K260IN WM12K268IN siemens-home.com/welcome Register your product online ens-home.com/welcome...
-
Page 2: Your New Washing Machine
Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries. -
Page 3: Table Of Contents
Contents e n W a s h i n g m a c h i n e I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use After-sales service ..30 Intended use Consumption rates ..31 For private domestic use only. ■ I n t e n d e d u s e The washing machine is suitable for Consumption values table . -
Page 5: Safety Instructions
Safety instructions If you lean on the washing Safety instructions ■ machine door when it is open, the washing machine Electrical safety may tip over and cause S a f e t y i n s t r u c t i o n s injuries. - Page 6 Safety instructions Warning Warning Danger of death! Eye/skin irritation! Children may lock themselves Detergents and care products in appliances, putting their lives may cause irritation if they at risk. come into contact with the eyes For appliances that have or skin. reached the end of their service Keep detergents and care life:...
-
Page 7: Environmental Protection
Saving energy and detergent authorized collection centers for ~ Page 12 disposal Energy-saving mode: The display ■ http://www.siemens-home.com/in/ panel lighting goes out after a few Preserve.html minutes and Start/Reload ! flashes. See also: To activate the lighting, press any Contact No: 180042535287 (toll-free) button. -
Page 8: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Turn on the water Sort the laundry. Open the door. plug. tap. -------- Select a programme Observe the... -
Page 9: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 19 Controls/display elements Washing machine door with window handle... -
Page 10: Control Panel
Getting to know the appliance Control panel 8 Start/Reload ! for starting, ( ° C (Temperature), 0 (Spin interrupting (f.e. adding/removing speed), 5 (Ready in) for laundry) and cancelling a changing the programme default programme settings @ Programme selector for selecting Overview of all programme default a programme and for switching settings ~ Page 16... -
Page 11: Laundry
Laundry Sorting laundry Laundry Sort your laundry according to the care P repare the laundry instructions and manufacturer's L a u n d r y information on the care labels: Caution! Type of fabric/fibre ■ Damage to the appliance/fabrics Colour ■... -
Page 12: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 13: Overview Of Programmes
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings/Presettings of the pro- grammes are highlighted in bold Max. - Page 14 Overview of programmes Programme/type of laundry/information Settings/Presettings of the pro- grammes are highlighted in bold Max. 2 kg : Wool Gentle handwash Hand or machine-washable fabrics made of wool or that contain cold - 40 °C wool; – – – ... 800 rpm particularly gentle wash programme to prevent shrinkage of laundry, with longer programme breaks (fabrics rest in the detergent solu- tion)
-
Page 15: Starching
Overview of programmes Programme/type of laundry/information Settings/Presettings of the pro- grammes are highlighted in bold Max. 7 kg/4* kg Kidswear Extra clean Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen cold - 40 °C – – – ... 1200** rpm (, æ... -
Page 16: Soaking
Programme default settings Soaking (Spin speed) 0 (Spin speed) Pour soaking agent/detergent into compartment II in accordance with Depending on the programme the manufacturer's instructions. progress, you can change the spin Select desired programme. speed (in rpm; rotations per minute) Press Start/Reload ! . -
Page 17: Additional Programme Settings17
Additional programme settings After the start, the preselected time e.g. ecoPerfect ¦ 8 h is displayed and the time counts For saving energy with a washing result down to the start of the wash comparable to that of the standard programme. -
Page 18: Select Programme/Switch On The Appliance
Operating the appliance Select programme/switch on The indicator lamp for the button lights up if a setting is active. the appliance The settings are not saved when the If you have activated the appliance is switched off. Note: childproof lock, you must first deactivate Additional settings ~ Page 17 it before you can set a programme. -
Page 19: Measure And Add Detergent And Care Products
Operating the appliance Measure and add detergent Pour the detergent and care products into the appropriate compartments: and care products Caution! Damage to the appliance Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.) may cause damage if they come into contact with the surfaces of the washing machine. -
Page 20: Start The Programme
Operating the appliance Do not use the measuring aid for The childproof lock can remain Note: Note: gel detergents and washing powder, or activated until you wish to start the next for programmes with prewash or when programme, even after switching off the "Ready in"... -
Page 21: Changing The Programme
Operating the appliance Changing the programme Removing laundry/switching off the appliance If you have started the wrong programme by mistake, you can Open the washing machine door change the programme as follows: and remove the laundry. Press Start/Reload ! . Set the programme selector to off Select the other programme. -
Page 22: Sensors
Sensors VoltMonitor Sensors The automatic voltage control system A utomatic load sensing detects unauthorised voltage drops S e n s o r s during the washing process. The automatic load sensing function adapts the water consumption ideally to Whenever there is an Note: each programme depending on the undervoltage, the colon flashes on the... -
Page 23: Setting The Signal
Setting the signal Setting the signal S e t t i n g t h e s i g n a l 1. Activate the setting mode for the signal volume Set to Ú. Press and hold the 0 button and turn one Press and hold the button for position to the right. -
Page 24: Cleaning And Maintenance
Cleaning and maintenance Descaling Cleaning and Descaling should not be necessary if maintenance the detergent is measured out correctly. However, if it is required, follow the Warning manufacturer's instructions for the C l e a n i n g a n d m a i n t e n a n c e Danger of death! descaling agent. -
Page 25: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Allow the water to cool down. Place the service flap back on, lock it into place, and close it. Turn off the water tap so that no more water can flow in and has to be drained via the drain pump. Switch off the appliance. -
Page 26: Faults And What To Do About Them
Faults and what to do about them. Press Start/Reload ! . Allow the However, if the laundry has to be programme to run for approximately removed, the washing machine door 40 seconds. can be opened as follows: Set the programme selector to off Warning position. -
Page 27: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/remedial action The washing machine door is unlocked. It is possible to add laundry. The temperature is too high. Wait until the temperature falls. ■ Water level too high. Not possible to add laundry. If necessary, close the wash- ■... -
Page 28: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. Faults Cause/remedial action Water is leaking out. Attach/replace the drainage hose correctly. ■ Tighten the screw connection of the supply hose. ■ No water supply. Start/Reload ! not pressed? ■... - Page 29 Faults and what to do about them. Faults Cause/remedial action The symbol x flashes Too much detergent used? ■ in the display panel. Foam Mix one tablespoon of fabric softener with 1/2 litre water and pour into may escape from the compartment II (not for outdoor fabrics, sportswear fabrics or those made detergent drawer.
-
Page 30: After-Sales Service
After-sales service After-sales service If you cannot correct the fault yourself, A f t e r - s a l e s s e r v i c e (see section, Faults and what to do about them ~ Page 26), please contact our after-sales service. -
Page 31: Consumption Rates
Consumption rates Consumption rates Consumption values table C o n s u m p t i o n r a t e s Programme Load Energy consumption* Water* Programme duration* Cottons 20 °C 7 kg 0.21 kWh 68 l Cottons 40 °C 7 kg 0.75 kWh 69 l... -
Page 32: Safety Instructions
Positioning and connecting In addition, a hose clamp (24 - 40 mm diameter, available from specialist dealers) is required to connect the water drain hose to a siphon. Useful tools Spirit level for levelling ■ Wrench with: ■ – WAF 13 for loosening the transport locks, and –... -
Page 33: Installation Surface
Positioning and connecting Notes Notes In addition to the safety information Recess width of 60 cm required. ■ ■ listed here, the local water and Only install the washing machine ■ electricity supplier may have special underneath a continuous worktop requirements. -
Page 34: Hose And Cable Lengths
Positioning and connecting Remove the sleeves. To do this, Right-hand connection ■ remove the mains cable from the holders. Fit the covers. Lock the covers firmly in place by applying pressure to the snap-in hooks. The following are available from Tip: specialist dealers/the after-sales service:... -
Page 35: Water Outlet
Positioning and connecting Only tighten the screw connections Open the water tap carefully, ■ by hand. If the screw connections checking the leak tightness of the are tightened too much with a tool connection points. The screw (pliers), the thread may be connection is under mains water damaged. -
Page 36: Levelling
Positioning and connecting – The water drains away quickly Tighten the lock nut against the enough. housing. In doing so, hold the foot tight and do not adjust its height. The lock nuts on all four appliance feet must be screwed tightly against the housing. -
Page 37: Before Washing For The First Time
Positioning and connecting If an earth-leakage circuit breaker is Do not use the machine with an ■ ■ used, only a type which displays this extension box, extension cord, spike symbol is used: z. busters etc., as this may lead to Only this symbol guarantees improper grounding conditions. -
Page 38: Transportation
Positioning and connecting Transportation Installing the transport locks: Remove the covers and keep them e.g. when moving home in a safe place. Use a screwdriver if necessary. Preparatory work: Turn off the water tap. Reduce the water pressure in the supply hose. - Page 40 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com *9001095968* 9001095968 (9503)