Show Port-Type - Cisco ME 3800X Command Reference Manual
Hide thumbs
Also See for ME 3800X:
- Installation manual (80 pages) ,
- Software manual (956 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
Chapter
show port-type
To display interface type information for the Cisco ME switch, use the show port-type command in
privileged EXEC mode.
Note
All ports on the switch are network node interfaces (NNIs), so only nni output is valid.
Syntax Description
eni
nni
uni
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(52)EY
Usage Guidelines
If you enter the command without keywords, the output includes the interface type information for all
ports on the switch. If you specify the port type (eni, nni, or uni), the output includes information for
the specified port type.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show port-type command. The output is the same for show
port-type and show port-type nni:
Switch# show port-type nni
Port
--------- ------------------ ---------- ----------------------------
Gi0/1
Gi0/2
Gi0/3
Gi0/4
Gi0/5
Gi0/6
Gi0/7
Gi0/8
Gi0/9
OL-28238-01
show port-type [eni | nni | uni] [ | {begin | exclude | include} expression]
Enhanced network interface.
Network node interface.
User network interface.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Name
Vlan
Port Type
trunk
Network Node Interface
trunk
Network Node Interface
trunk
Network Node Interface
1
Network Node Interface
1
Network Node Interface
routed
Network Node Interface
1
Network Node Interface
1
Network Node Interface
1
Network Node Interface
Cisco ME 3800X and ME 3600X Switch Command Reference
show port-type
(nni)
(nni)
(nni)
(nni)
(nni)
(nni)
(nni)
(nni)
(nni)
-135
Advertisement
Table of Contents
