Related Manuals for Dell Embedded Box PC 3000
Summary of Contents for Dell Embedded Box PC 3000
- Page 1 Dell Embedded Box PC 3000 Installation and Operation Manual Computer Model: Dell Embedded Box PC 3000 Regulatory Model: N02PC Regulatory Type: N02PC001...
- Page 2 WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2016 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
-
Page 3: Table Of Contents
Contents 1 Overview......................... 5 2 Features..........................6 .....................................6 Top view ..................................6 Bottom view ...............................7 VGA connector mapping ............................8 RS232 connector mapping ............................8 RS485 connector mapping ............................8 CANbus connector mapping ................................9 DC power port ............................9 RS422 connector mapping ..................................10 System LEDs 3 Setting up the Embedded Box PC.................. - Page 4 10 Contacting Dell......................38...
-
Page 5: Overview
It can be either mounted on the wall using the Dell approved wall mount kits or mounted into your existing rack infrastructure using the Rail mount. It supports Windows 7 Professional SP1 64-bit, Windows 7 Professional for Embedded Systems SP1 64-Bit, Windows Embedded Standard 7 P/E 64-bit,Windows 10 Professional 64-bit, Windows 10 IoT Enterprise LTSB 2015 64-bit,and Ubuntu Desktop 16.04 operating... -
Page 6: Features
Features Top view Features Front access door Loosen the captive screw that secures the front access door to the chassis. Remove the front access door to access the hard drive, solid-state drive, or SIM-card slot. USB 3.0 port Connect a USB enabled device. Provides data transfer speeds up to 5 Gbps. -
Page 7: Vga Connector Mapping
Features RS232/RS485 port one (configurable in the BIOS) Connect a RS232/RS485 cable to the Embedded Box PC. For more information, see RS232/RS485 connector mapping. 12-26V DC power port Connect a 12-26V DC power cable for supplying power to the Embedded Box PC. For more information about the physical dimensions of the DC power port, see DC power port. -
Page 8: Rs232 Connector Mapping
Signal Signal Signal DDCCLK RS232 connector mapping Signal Signal RS485 connector mapping Signal Signal DATA- DATA+ CANbus connector mapping... -
Page 9: Dc Power Port
Signal Signal CAN_L CAN_H DC power port The following figure shows the physical dimensions of the DC power port. RS422 connector mapping Signal Signal... -
Page 10: System Leds
System LEDs Feature Network status light one Indicates the network activity of network port one. Network status light two Indicates the network activity of network port two. Hard-drive activity light Indicates the read/write activity from the internal storage device. -
Page 11: Setting Up The Embedded Box Pc
WARNING: Before you begin any of the procedures in this section, read the safety information that shipped with your Embedded Box PC. For additional best practices information, go to www.dell.com/regulatory_compliance. WARNING: To ensure that the protection provided by the Embedded Box PC is not impaired, do not use or install the Embedded Box PC in any manner other than what is specified in this manual. -
Page 12: Mounting The Embedded Box Pc On The Wall Using The Wall-Mount Brackets
Install the mobile broadband kit (WWAN 1 and WWAN 2) to enable the mobile broadband connection. NOTE: For more information about connecting the wireless antenna to Dell Embedded Box PC, see the documentation that is shipped with the wireless antenna. - Page 13 Secure the two mounting brackets to the back of the Embedded Box PC by using two M3x5 screws. NOTE: Torque the screws at 3 to 3.4 kilograms-centimeter (2.6 to 3.0 pounds-inch). Drill four holes in the wall that correspond to the holes on the mounting brackets. Place the Embedded Box PC against the wall and align the holes on the mounting brackets with the holes on the wall.
-
Page 14: Mounting The Embedded Box Pc On A Din Rail
Secure the Embedded Box PC to the wall. NOTE: Torque the screws (M4x6) at 5 to 5.4 kilograms-centimeter (4.3 to 4.7 pounds-inch). Mounting the Embedded Box PC on a DIN rail The Embedded Box PC can be mounted on a DIN rail by using DIN-rail clips. Hardware required for DIN-rail •... -
Page 16: Setting Up Your Operating System
Before reinstalling Ubuntu Desktop, ensure the following: • Connect a keyboard, mouse, and monitor to the Embedded Box PC, or connect to the Embedded Box PC through a KVM session, Dell Wyse Cloud Client Manager (CCM), or Dell Command | Monitor (DCM). • Create a bootable USB flash drive. -
Page 17: Restoring Ubuntu Desktop
Press F12 to access the boot menu. Enable UEFI boot mode in System Setup and boot from the Ubuntu Desktop USB flash drive. Select Dell recovery to start Ubuntu Desktop recovery. Select the disk onto which you want to install the Ubuntu Desktop operating system. - Page 18 Turn off your computer. Turn on the Embedded Box PC. When the Dell logo appears on the screen, press F8 several times to open the Advanced Boot Options menu. Use the arrow keys to select Repair Your Computer and press Enter.
-
Page 19: Windows 7 Professional For Embedded Systems Sp1
Common port mappings Serial port mapping The following table shows the serial port mapping at the bottom of the Embedded Box PC 3000 with the Dell factory installed Windows 7 Professional SP1 OS image. Table 1. Serial port mapping... - Page 20 Boot up and log in Before configuring the Windows 7 Professional for Embedded Systems, connect a keyboard, mouse, and monitor to the Embedded Box PC. Turn on the Embedded Box PC to boot into Windows. Select regional settings. Create a user account. Read and agree to applicable End User Licence Agreements.
-
Page 21: Windows Embedded Standard 7 P/E
Common port mappings on Embedded Box PC 5000 with Windows 7 Professional for Embedded Systems Serial port mapping The following table shows the serial port mapping at the bottom of the Embedded Box PC 3000 with Windows 7 Professional for Embedded Systems OS image. -
Page 22: Windows 10 Professional
Common port mappings Serial port mapping The table lists the serial port mapping on the Embedded Box PC 3000 and the multifunction port cable, with the Dell factory installed Windows Embedded Standard 7 P/E OS. Table 3. Serial port mapping... - Page 23 Locate the WWAN connection in the Wi-Fi section and connect (or disconnect) the WWAN module. Common port mappings Serial port mapping The table lists the serial port mapping on the Embedded Box PC 3000 and the multifunction port cable, with the Dell factory installed Windows 10 Pro OS.
-
Page 24: Windows 10 Iot Enterprise Ltsb 2015
Select Finish. Windows Windows 10 IoT Enterprise LTSB 2015 basic functions BIOS update Download the latest BIOS version from www.dell.com/support. Run the executable in the download package from the local machine. Watchdog timer The watchdog timer for Windows 10 IoT Enterprise LTSB 2015 is enabled and disabled through the BIOS. -
Page 25: Recommended Drivers And Applications For Embedded Box Pc Running Windows Operating System
Common port mappings Serial port mapping The table lists the serial port mapping on the Embedded Box PC 3000 and the multifunction port cable, with the Dell factory installed Windows 10 IoT Enterprise LTSB 2015 OS. Table 5. Serial port mapping... - Page 26 After the download is complete, navigate to the folder where you saved the chipset driver file. Double-click the chipset driver file icon and follow the instructions on the screen. Critical Microsoft QFEs Dell recommends installing all the latest available fixes specific to Embedded Box PC through Windows Update or from www.microsoft.com. Graphics Go to www.dell.com/support.
- Page 27 Double-click the HD Audio driver file icon and follow the instructions on the screen. Integrated wired network adapter Go to www.dell.com/support. Click Product support, enter the Service Tag of the Embedded Box PC, and then click Submit. NOTE: If you do not have the Service Tag, use the auto-detect feature or manually browse for the Embedded Box PC model.
- Page 28 Double-click the ZigBee 3.0 driver file icon and follow the instructions on the screen. CANbus Go to www.dell.com/support. Click Product support, enter the Service Tag of the Embedded Box PC, and then click Submit. NOTE: If you do not have the Service Tag, use the auto-detect feature or manually browse for the Embedded Box PC model.
-
Page 29: Specifications
236.50 mm (9.31 in) Depth 160.80 mm (6.33 in) Height 60 mm (2.36 in) Weight 2 kg (4.41 lb) System information Model number Dell Embedded Box PC 3000 • Intel Atom E3825 Processor • Intel Atom E3827 • Intel Atom E3845 •... - Page 30 Ports and connectors • One microphone port • Two PS/2 ports • One GPIO port • One RS232/RS422 port • Multi-function port (male) • Two RJ45 ports Network • Two wireless antenna ports • Two mobile broadband antenna ports • One CANbus port (optional) I/O port •...
- Page 31 Environmental requirements Operating –15.20 m to 5000 m (–50 ft to 16,404 ft) Storage –15.20 m to 10,668 m (Sea level to 35,000 ft) IP level IP 30...
-
Page 32: Activating Your Mobile Broadband Service
Activating your mobile broadband service NOTE: For more information about installing the SIM card, see the Embedded Box PC Service Manual at www.dell.com/ support. Turn on the Embedded Box PC. Follow these steps to connect to the mobile broadband network:... -
Page 33: Using The Multi-Function Port Cable
Using the Multi-function port cable NOTE: The Multi-function port cable is sold separately. You can use the Multi-function port cable to increase the number of available ports on the Embedded Box PC. Features GPIO port Connect a GPIO enabled device or dongle. Line-in port Connect recording or playback devices. - Page 34 Signal Signal TCA9555 P15 TCA9555 P14 TCA9555 P05 TCA9555 P13 TCA9555 P04 TCA9555 P12 TCA9555 P03 TCA9555 P11 TCA9555 P02 TCA9555 P10 TCA9555 P01 TCA9555 P00 The following figure shows the Multi-function port pin number mapping on the Embedded Box PC. The following table shows the Multi-function port pin definition details.
- Page 35 The following figure shows the Multi-function port pin number mapping on the Multi-function port cable. The following table shows the Multi-function port pin definition details. Signal Signal Signal LINE1_JD FRONT_JD LINE1_RIN MIC1_JD LINEOUT_R MIC_RIN LINE1_LIN LINEOUT_L MIC_LIN TCA9555 P03 TCA9555 P05 TCA9555 P04 TCA9555 P00 TCA9555 P02...
-
Page 36: Setting Up The Zigbee Dongle
Setting up the ZigBee Dongle Shut down the Embedded Box PC. Connect the ZigBee dongle to any external USB port on the Embedded Box PC. Turn on the Embedded Box PC and complete the setup. NOTE: For ZigBee development information, see the SiLabs developer website at www.silabs.com or contact the network system’s application provider. -
Page 37: Connector Kit
Connector kit Remote Power Connector Use the remote power connector to install a remote power switch. -
Page 38: Contacting Dell
Go to www.dell.com/contactdell. Verify your country or region in the drop-down list at the bottom of the page. Select the appropriate service or support link based on your requirement or choose the method of contacting Dell that is convenient for you.