Table of Contents
Advertisement
CMO Operations & Logistics
Training & Vendor Development
MMultimedia Creation & Support
25.) Protect the LCD with the plastic film.
27.) The Bezel Assembly is glued to the Slide Assembly. Use
the SRT-6 to separate both parts. If necessary remove the
rest of the adhesive. Always use a new Bezel Assembly.
29.) Remove the Bottom Keymat.
31.) Protect the Camera Window with a plastic film.
Service Manual 6 RM-82
Page
5
(25)
CONFIDENTIAL
26.) The Earpiece is glued to the UI Board Assembly with
the Earpiece Adhesive. Use SRT-6 to separate these parts
from each other. Use a new Earpiece Adhesive if necessary.
28.) Open the two snaps of the Bottom Keymat with the
SRT-6.
30.) Unscrew the six Torx Plus® size 6 screws.
use the reverse order and a torque driver with a torque of
15Ncm.
32.) Open the snaps of the B-Cover Assembly on both ...
Copyright © 2005-2007 NOKIA Corporation. All rights reserved.
Approved 7.0
MGR
5.Jan.2007
For assembly
Advertisement
Table of Contents
