Table of Contents
Advertisement
Nokia Customer Care
• WCDMA troubleshooting
i
From the Testing menu, activate the Tx Control window:Testing -> WCDMA -> Tx Control.
ii In the Tx Control window:
• Select the Algorithm mode tab.
• Set Start level to "0" dBm (Default = "0").
• Set Step size, Step count and Sequence to "0" (Default = "0").
• Set Scrambling code class to "LONG" (Default = "LONG").
• Set Scrambling code to "16" (Default = "16").
• Set DPDCH Code number to "0", Code class to "2" and Weight to "15" (Defaults).
• Set DPCCH Code number to "0", Code class to "2" and Weight to "8" (Defaults).
• Set Channel to 9750.
• Check the "DPDCH enabled" checkbox (Default).
Page 7–14
Figure 71 RF Controls window
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
RF Troubleshooting and Manual Tuning Guide
RM-36
Issue 1
Advertisement
Chapters
Table of Contents
Troubleshooting
