Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for D-Link DGS-1024D G2
Summary of Contents for D-Link DGS-1024D G2
-
Page 2: Preface
Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. -
Page 3: Certifications
Certifications D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. FCC Class A Certification This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. -
Page 4: Table Of Contents
Certifications ..............ii Power Failure ................24 Package Contents .............. 1 Cable Diagnostics ............25 Introduction ..............2 DIP Switches ..............26 D-Link Green Technology ............3 EEE ....................27 Power Saving Technology ............3 Flow Control .................27 Features ................... 4 Port Isolation ................28 Storm Control ................28... -
Page 5: Package Contents
Section 1 - Product Overview Package Contents One D-Link DGS-1016D 16-Port or DGS-1024D 24-Port 10/100/1000BASE-T Gigabit Ethernet Switch One AC power cord Four rubber feet Screws and two mounting brackets Quick Install Guide Power cord retainer Tie wrap If any of the above items are missing, please contact your reseller. -
Page 6: Introduction
Section 1 - Product Overview Introduction Thank you and congratulations on the purchase of your new D-Link DGS-1016D/DGS-1024D Gigabit Ethernet Switch. D-Link's next generation DGS-1016D and DGS-1024D switches blend plug-and-play simplicity with exceptional value and reliability for small and medium-sized business (SMB) networking. All models are housed in a rack-mountable metal case with easy-to-view front panel diagnostic LEDs. -
Page 7: D-Link Green Technology
This switch supports power saving by link status. If there is no link on a port, such as when there is no computer connected to the port or the connected computer is powered off, D-Link’s Green Technology will enter a "sleep mode", drastically reducing power used for that port. -
Page 8: Features
Connect devices to the switch as the scale and volume of network traffic increases. • 10/100/1000 Base-T on all ports • Store and Forward Switching Method • Cable Diagnostics at boot • D-Link Green Technology • Auto MDI/MDIX • Auto Negotiation of Duplex Mode • Full/Half Duplex Transfer Mode on 10/100 Mbps •... -
Page 9: Hardware Overview
Section 1 - Product Overview Hardware Overview Front Panel 10/100M Link 1000M Link Gigabit Switch Power DGS-1016D Power Link/Act/Speed LED DIP Switches RJ 45 Ethernet Ports D-Link DGS-1016D/DGS-1024D User Manual... -
Page 10: Led Indicators
Power on Power Green Light off Power off Connection (or link) at 1000 Mbps Green Blinking Reception or Transmission at 1000 Mbps Link/Act/Speed Connection (or link) at 10/100 Mbps Amber Blinking Reception or Transmission at 10/100 Mbps D-Link DGS-1016D/DGS-1024D User Manual... -
Page 11: Rear Panel
Name Function Description Kensington The D-Link DGS-1016D/24D may be physically secured via a Kensington Security Lock to help deter theft. Security Slot A ground screw hole is provided for grounding the switch. Grounding is optional, but recommended as it Switch Ground provides an additional layer of protection in the event of an electrical fault. -
Page 12: Safety Instructions
• Do not spill food or liquids on the switch, and never operate the product in a wet environment. • Do not push any objects into the openings of the device. Doing so can cause a fire or an electric shock by shorting out interior components. D-Link DGS-1016D/DGS-1024D User Manual... - Page 13 • An object has fallen onto the product. • The product has been exposed to water. • The product has been dropped or damaged. • The product does not operate correctly when following the operating instructions. D-Link DGS-1016D/DGS-1024D User Manual...
-
Page 14: Electrical Power Guidelines
• Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip. D-Link DGS-1016D/DGS-1024D User Manual... - Page 15 • If the system has multiple sources of power, disconnect power from the system by unplugging all power cables from the power supplies. • Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system. Avoid sudden stops and uneven surfaces. D-Link DGS-1016D/DGS-1024D User Manual...
-
Page 16: Protecting Against Electrostatic Discharge
2. When transporting a sensitive component, first place it in an antistatic container or packaging. 3. Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads, workbench pads, and an antistatic grounding strap. D-Link DGS-1016D/DGS-1024D User Manual... -
Page 17: Hardware Installation
Section 3 - Hardware Installation Hardware Installation This chapter provides unpacking and installation information for the D-Link DGS-1016D/DGS-1024D Gigabit Ethernet Switch. Step 1 - Before Connecting to the Network The site where the switch is installed may greatly affect its performance. For the switch to perform safely at its optimal level, please select a site which meets the following requirements: 1. -
Page 18: Step 2 - Switch Installation
• Use the rubber feet provided to cushion the switch, protect the casing from scratches and prevent it from scratching other surfaces. Attaching the Rubber Feet Position and apply the rubber feet to the bottom corners of the DGS-1016D/1024D switch. Attach the adhesive rubber pads to the bottom D-Link DGS-1016D/DGS-1024D User Manual... -
Page 19: Rack Installation
To install, attach the mounting brackets provided for this purpose to the switch’s side panels (one on each side) and secure them with the screws provided. Please note that these brackets are not designed for palm size switches. Attach the mounting brackets to the switch D-Link DGS-1016D/DGS-1024D User Manual... - Page 20 Section 3 - Hardware Installation Mount the switch in the rack or chassis using the screws provided with the equipment rack. D-Link DGS-1016D/DGS-1024D User Manual...
-
Page 21: General Precautions For Rack-Mountable Products
• After a component is inserted into the rack, carefully extend the rail into a locking position, and then slide the component into the rack. • Do not overload the AC supply branch circuit that provides power to the rack. The total rack load should not exceed 80 percent of the branch circuit rating. D-Link DGS-1016D/DGS-1024D User Manual... - Page 22 E. Reliable Grounding - Reliable grounding of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips). D-Link DGS-1016D/DGS-1024D User Manual...
-
Page 23: Step 3 - Installing The Power Cord Retainer
A. Insert a tie wrap with the rough side facing down into the hole below the power socket. Insert tie wrap B. Connect the AC power cord into the AC power inlet of the switch. Connect the power cord to the switch D-Link DGS-1016D/DGS-1024D User Manual... - Page 24 Section 3 - Hardware Installation C. Attach the retainer to the tie wrap and slide it up to the end of the cord. Attach the retainer to the tie wrap D-Link DGS-1016D/DGS-1024D User Manual...
- Page 25 Section 3 - Hardware Installation D. Wrap the retainer around the power cord and insert the free end into the fastener. Wrap the retainer around the power cord D-Link DGS-1016D/DGS-1024D User Manual...
- Page 26 Section 3 - Hardware Installation E. Fasten the retainer by pulling on it until secure. Secure the power cord D-Link DGS-1016D/DGS-1024D User Manual...
-
Page 27: Step 4 - Grounding The Switch
5. Attach the terminal lug ring at the other end of the grounding cable to an appropriate grounding stud or bolt on rack where the switch is installed. 6. Verify that the connections to the ground connector on the switch and to the rack are securely attached. Ground cable, screw and #8 terminal lug rings D-Link DGS-1016D/DGS-1024D User Manual... -
Page 28: Step 5 - Plugging In The Ac Power Cord
After the switch is powered on, the LED indicators will blink briefly while the system resets. Power Failure As a precaution, unplug the switch in the event of a power failure. Plug the switch back in when power is resumed. D-Link DGS-1016D/DGS-1024D User Manual... -
Page 29: Cable Diagnostics
Cable Diagnostics function does not detect the length of Ethernet cabling. Remember that the length of cabling between two Ethernet devices may not exceed 100 meters (or 300 feet). Link/Act/Speed LED Color Status Green No Fault/Good Cable Connection Amber Open or Short Circuit D-Link DGS-1016D/DGS-1024D User Manual... -
Page 30: Dip Switches
24. Port 24 will be able to communicate with all the ports available on this switch. Note: The switch must be power cycled after changing DIP Switch settings for new settings to take effect. D-Link DGS-1016D/DGS-1024D User Manual... -
Page 31: Eee
01-80-C2-00-00-01. Upon reception of this frame, the sender will hault transmission for a specificied period of time. An assessment of currently employed networking technologies should be made before enabling flow control. Note: The switch must be power cycled after changing DIP switch settings for new settings to take effect. D-Link DGS-1016D/DGS-1024D User Manual... -
Page 32: Port Isolation
While this does not resolve broadcast radiation problems, it will help a network administrator to diagnose and resolve the root cause of the broadcast storm. Note: The switch must be power cycled after changing DIP switch settings for new settings to take effect. D-Link DGS-1016D/DGS-1024D User Manual... -
Page 33: Technical Specifications
ƒ 512 KBytes per device/Kbits per device Filtering Address Table ƒ 8K MAC address per device Switching Packet Filtering/Forwarding Rate ƒ Full wire speed Features MAC Address Learning ƒ Self-learning, auto-aging Forwarding Mode ƒ Store-and-forward Topology ƒ Star D-Link DGS-1016D/DGS-1024D User Manual... - Page 34 ƒ 280 x 125 x 44 mm (11.02 x 4.92 x 1.73 inches) ƒ 280 x 180 x 44 mm (11.02 x 7.09 x 1.73 inches) Dimensions Weight ƒ 1.038 kg (2.29 pounds) ƒ 1.35 kg (2.97 pounds) D-Link DGS-1016D/DGS-1024D User Manual...
- Page 35 ƒ ICES-003 Class A ƒ CE Class A ƒ VCCI Class A Emission Certifications (EMI) ƒ C-Tick Class A ƒ CCC ƒ BSMI Certifications ƒ KCC ƒ cUL/UL ƒ CB Safety ƒ CCC ƒ BSMI ƒ CE(LVD) D-Link DGS-1016D/DGS-1024D User Manual...
-
Page 36: Regulatory Information
Industry Canada statement: This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada." D-Link DGS-1016D/DGS-1024D User Manual... - Page 37 " "警告使用者: 此為甲的資訊技術設備，在居住環境中使用時，可能會造成射頻擾動，在這種情況下，使用者會被要求採取某些適當的對策。" CE EMI Class A Warning: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DGS-1016D/DGS-1024D User Manual...