hit counter script

Getting Started; Powering On/Off Mobile Phone; Installing And Removing Battery - Nokia E66 User Manual

Gsm/gprs digital mobile phone
Hide thumbs Also See for E66:
Table of Contents

Advertisement

G-TIDE
E66 User Manual

3 Getting Started

3.1 Powering on/off Mobile Phone

To power on/off the mobile phone, long press the hang-up
key.
If you have powered on the mobile phone yet without a SIM
card, there are two states.
 
"Insert SIM card" – Indicates that there is no SIM card,
but you can dial 112 with the mobile phone.
 
"Unlock" -- You may set the phone lock and SIM card
password.
After you insert the SIM card, the phone will detect
automatically whether the SIM card is available and then
display the following prompts on the screen one by one:
1. "Input mobile phone lock password" – If you set the
mobile phone lock.
2. "Input PIN" – If you set the SIM card password.
3. "Emergency call only (112 only)" – Indicates that the
19
G-TIDE
E66 User Manual
mobile registers other networks. Only 112 can be dialed
with the mobile phone.
4. "Search" – The mobile phone will search for a network
till it connects a proper network.
This mobile phone supports dual SIM cards and dual standby
for an ultra long standby time. After it is registered on the
network successfully, it will identify automatically whether the
SIM card inserted by the user is SIM 1 or SIM 2.
Note: If both cards are registered on the same network, both
network names will be displayed.

3.2 Installing and Removing Battery

(Make sure that the mobile phone is in the powered-off state.)
Take out the battery in the following procedure:
First, remove the battery housing by uplifting buckle outside.
Uplift the lower part of the battery and take it out.
Install the battery in the following procedure:
During installation, insert the upper part of the battery into the
slot, and push the lower part of the battery up till it stops.
20

Advertisement

Table of Contents
loading

Table of Contents