Sharp 21FL94 Operation Manual

B246 wj

Hide thumbs Also See for 21FL94:

Service manual (50 pages)

Table of Contents

Quick Links

Summary of Contents for Sharp 21FL94

Page 1: Table Of Contents
B246 WJ MODEL 21FL94 COLOR TELEVISION OPERATION MANUAL CONTENTS PAGE • IMPORTANT INFORMATION ......... • Supplied Accessories ........... • IMPORTANT SAFEGUARDS ......03 ~ • Before Operating Your Television ........ • Antenna Connections ........05 ~ • Quick Reference Control Operation ....
Page 2: Important Information
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television – built for outstanding quality, reliability and performance. Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed through the most stringent quality control tests at the factory.
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS CAUTION : Please read all of these instructions before you operate your television and save these instructions for later use. Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS.
Page 4: Important Safeguards
IMPORTANT SAFEGUARDS (Continued) EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL ELECTRICAL CODE. ANTENNA LEAD-IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT ELECTRIC SERVICE GROUNDING CONDUCTORS EQUIPMENT GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM 14. For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna.
Page 5: Before Operating Your Television
Before Operating Your Television Location • For normal operation, your TV should be located in an area of the room where cool adequate ventilation is provided. Do not place the back of the television set in a place where free airflow will be restricted. •...
Page 6 Cable TV Line (not supplied) Cable TV converter/ descrambler (not supplied) Note: • Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required. 21FL94_05-10_EN 19/3/04, 11:52 am Dimension: 140mm x 215mm...
Page 7: Quick Reference Control Operation
Quick Reference Control Operation Quick Reference Control Operation L Location of Controls Front Panel ON TIMER indicator Light up red when the ON POWER TIMER is set. Press → On. Press again → Off. SENSOR AREA FOR (INSIDE DOOR) REMOTE CONTROL MENU.
Page 8: Quick Reference Control Operation
Quick Reference Control Operation (Continued) Basic Remote Control Functions Infrared Transmitter Window POWER Press → On. CATV/DVD-TV/VCR MODE buttons Press again → Off. Press TV/VCR, sends power and POWER CATV channel select commands (Channel REMOTE KEYPAD up/down and Random Access buttons) Accesses any channel from keypad.
Page 9: Ez Setup During First Use
EZ SETUP during First Use L When you turn on the TV for the first time, it will automatically POWER memorize the broadcast channels. POWER CATV Please perform the following instructions before pressing the DISPLAY INPUT POWER button. (1) Insert the batteries into the remote control. (See page (+)/(–) (2) Connect the antenna cable to the TV set.
Page 10: Demo Mode
MAIN MENU screen when you press MENU on the TV set. • Some features of your TV set will not be accessible without the Remote Control. If you lost your Remote Control, contact a Sharp Service Center for a replacement.
Page 11: Language
Language L The language for the ON SCREEN DISPLAY can be set to ENGLISH, ESPAÑOL (SPANISH) or FRANCAIS (FRENCH). L Setting the ON SCREEN DISPLAY Language. Press MENU to access the MAIN MENU screen. ME NU T I ME R V I D E O A D J U S T A UD I O A D J U S T...
Page 12: Sleep Timer
Timer L SLEEP TIMER You can preset your television to turn off automatically in increments of 30, 60, 90, or 120 minutes. Press MENU to access the MAIN MENU screen. ME NU T I ME R V I D E O A D J U S T A UD I O A D J U S T A UD I O...
Page 13: Clock Set
Timer (Continued) L CLOCK SET Press MENU to access the MAIN MENU screen. ME NU T I ME R V I D E O A D J U S T A UD I O A D J U S T A UD I O S E L E C T C L OS E D...
Page 14: On Timer
Timer (Continued) L ON TIMER Automatically turns TV power on at the time set. Press MENU to access the MAIN MENU screen. ME NU T I ME R V I D E O A D J U S T A UD I O A D J U S T A UD I O S E L E C T...
Page 15: On Timer
Timer (Continued) Press VOL (+) or (–) to change the STATUS setting. ON T I ME R 1 1 : 1 0 PM DAILY S T A T US : ON – Status: ON The ON TIMER is activated. The ON TIMER indicator will lights up red to indicate ON TIMER is set.
Page 16 Timer (Continued) L OFF TIMER The OFF TIMER function will turn off the TV power when reach the set of time. Press MENU to access the MAIN MENU screen. ME NU T I ME R V I D E O A D J U S T A UD I O A D J U S T A UD I O...
Page 17: Timer
Timer (Continued) Press VOL (+) or (–) to change the STATUS setting. OF F T I ME R 1 1 : 1 0 PM DAILY S T A T US : ON – Status: ON The OFF TIMER is activated. Status: OFF The OFF TIMER will not operate.
Page 18: Video Adjust
SKIP POWER (DVD/VCR) VCR-CH MENU BRIGHT To increase brightness To decrease brightness SHARP To increase sharpness To decrease sharpness COLOR TEMP. To choose a MH, HIGH, LOW or ML COLOR TONE. RESET To return all adjustments to factory preset levels.
Page 19: Audio Adjust
Audio Adjust Selected item VOL (+) button VOL (–) button TREBLE To increase treble response To decrease treble response BASS To increase bass response To decrease bass response BALANCE To emphasize the right speaker’s volume To emphasize the left speaker’s volume RESET To return all adjustments to factory preset levels.
Page 20: Audio Select
Audio Select L MTS (Multichannel TV Sound) This circuit allows reception of stereo or bilingual TV sound. L INTERNAL SPEAKER SWITCH This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from external speakers by using the AUDIO OUTPUT JACKS on page L FAO (Fixed Audio Output) This function turns the TV’s internal speakers “OFF”...
Page 21: Audio Select
Audio Select (Continued) L You can enjoy Hi-Fi stereo sound or SAP broadcasts where available. • Stereo broadcasts Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound. • SAP broadcasts Television broadcast can be received with either MAIN or SAP sound. MAIN sound: The normal program soundtrack.
Page 22: Closed Caption
Closed Caption L HOW TO SET CLOSED CAPTION • Your TV is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows you to view conversations, narration, and sound effects in TV programs and home videos as subscript on your TV screen as shown on the right.
Page 23: View Timer
VIEW TIMER L VIEW TIMER This function allows you to restrict TV viewing time and also allows you to control TV usage. This function is to prevent your children from watching too much TV. VIEWING TIME (an accumulative timer: counts only the time duration acquired while the TV is on.) •...
Page 24 VIEW TIMER (Continued) Example • To restrict anybody from watching the TV for 5 hours, after watching V I EW T I MER the TV for 2 hours, your settings would look like this: V I EW I NG T I ME •...
Page 25: View Timer
VIEW TIMER (Continued) L To cancel the VIEW TIMER setting or change the SECRET No. (When you forget the SECRET No.) P U T S E C R E T N o . Repeat “How to set VIEW TIMER” steps and select “VIEW TIMER”...
Page 26: Ch Setup
Ch Setup L EZ SETUP By operating the channel preset functions, you can preset your TV to the desired channels for viewing. FLASHBACK ENTER (+)/(–) PERSONAL PREFERENCE (8)/(9) – MENU MUTE SKIP POWER (DVD/VCR) VCR-CH MENU Press MENU to access the MAIN MENU screen. ME NU Press CH ( 8 ) or ( 9 ) to move the “a”...
Page 27 Ch Setup (Continued) L CHANNEL SETTING If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel. AIR/CABLE setting Press MENU to access the MAIN MENU screen. ME NU T I ME R Press CH ( 8 ) or ( 9 ) to move the “a”...
Page 28 Ch Setup (Continued) How to saving broadcast TV channels into memory. Press MENU to access the MAIN MENU screen. ME NU T I ME R Press CH ( 8 ) or ( 9 ) to move the “a” mark to “CH SETUP”. V I D E O A D J U S T A UD I O A D J U S T...
Page 29 Ch Setup (Continued) How to adding weak or additional channels or erasing unwanted channels from TV memory. Press MENU to access the MAIN MENU screen. ME NU T I ME R Press CH ( 8 ) or ( 9 ) to move the “a” mark to “CH SETUP”. V I D E O A D J U S T A UD I O A D J U S T...
Page 30: Personal Preference
Ch Setup (Continued) REMOTE L PERSONAL PREFERENCE KEYPAD By setting the PERSONAL PREFERENCE channels in advance, you can select your favorite channels easily. FLASHBACK ENTER PERSONAL (+)/(–) PERSONAL PREFERENCE PREFERENCE (8)/ (9) – MENU MUTE SKIP MENU POWER (DVD/VCR) VCR-CH Press MENU to access the MAIN MENU screen.
Page 31: Universal Plus Function
Ch Setup (Continued) L UNIVERSAL PLUS FUNCTION VCR or DVD input mode will be selected automatically by (+)/(–) PERSONAL PREFERENCE pressing the VCR or DVD PLAY buttons on the UNIVERSAL REMOTE CONTROL. (8)/(9) – MENU MUTE SKIP POWER (DVD/VCR) VCR-CH MENU Press MENU to access the MAIN MENU screen.
Page 32: Energy Save
Set Up L ENERGY SAVE This feature lets you lower the power consumption of your TV POWER CATV set which in turn saves you money and minimizes the impact on the environment. When this feature is turned on, it reduce DISPLAY INPUT the brightness of the TV to a level that consumes...
Page 33: Blue Screen
Set Up (Continued) L BLUE SCREEN Automatically turns the screen blue if a broadcast signal is not received. Press MENU to access the MAIN MENU screen. ME NU T I ME R Press CH ( 8 ) or ( 9 ) to move the “a” mark to “SETUP”. V I D E O A D J U S T A D J U S T A UD I O...
Page 34: Set Up
Set Up (Continued) L AUTO INPUT The unit is preset to switch to the INPUT 2 mode automatically when VIDEO equipment is connected to the INPUT 2 terminal. Do the following to switch this feature off: Press MENU to access the MAIN MENU screen. ME NU T I ME R Press CH ( 8 ) or ( 9 ) to move the “a”...
Page 35: Using The Video And Audio Input Terminals
Using the Video and Audio Input Terminals L Connecting video equipment for playback of video material. • When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen on the television screen. Connecting video device equipped with video output terminals.
Page 36: Using The Video And Audio Input Terminals
Using the Video and Audio Input Terminals (Continued) (Rear connection terminals of TV) Video Equipment IN 1 Video Equipment with COMPONENT Component Video LINE (Component Color) AUDIO Output Terminals (Y, P and P VIDEO To AUDIO To COMPONENT OUTPUT VIDEO OUTPUT (L/R) Terminals L To watch video material playback.
Page 37: Using The Audio Output Terminals
Using the Audio Output Terminals L These terminals are used for connecting an external audio amplifier. The STEREO/MONO/ SAP, VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control or directly on the TV itself. These terminals relay the audio signal of all programs being displayed on the TV screen.
Page 38: Operation Of Remote Control
Operation of Remote Control L “Identifying” VCRs, cable TV converters L Universal Remote Control and DVDs With the purchase of your television set you Your Remote Control has been set at the also have received the latest innovation in factory to operate your TV and many remote remote control technology.
Page 39 Setting Scott Method. 06, 11, 24 Sears (1) Press TV/VCR . Sharp 01, 02, 03 Shintom (2) Press and hold down DISPLAY and CH ( 9 ) Sony 12, 13, 38 on your remote control.
Page 40 Pioneer • If yes, the Remote is ready to operate the DVD Proscan and no further steps are needed. Samsung • If no, continue to the “identifying” section. Sharp 01, 10 Sony Toshiba Setting Method. Yamaha Refer to the following steps and list to quickly...
Page 41: Operation Of Remote Control
Operation of Remote Control (Continued) POWER CATV CATV/DVD-TV/VCR POWER DISPLAY INPUT DISPLAY REMOTE KEYPAD FLASHBACK ENTER PERSONAL PREFERENCE – CH (9) CH (8)/(9) MENU MUTE SKIP POWER (DVD/VCR) VCR-CH PLAY STOP PAUSE TV • CATV • VCR • DVD • How to identify a cable converter REMOTE CONTROL CATV CONVERTER...
Page 42: Specifications
Specifications MODEL 21FL94 Receiving System NTSC Stereo Broadcast MTS/SAP Reception Channels 2-13 ch 14-69 ch CATV 1-125 ch Channel Tuning 181-channel Reception PLL tuning system Antenna Input Impedance VHF/UHF 75 ohm Unbalanced Screen Size 21˝ Diagonally Measured (Visible Area) (50.8 cm)
Page 43: Before Calling For Service
Unplug the TV and plug it in again after X X X X two minutes or longer. Calling for Service In Mexico: Sharp Electronics Corporation Sucursal en México Col. Ampliación Asturias México D.F. 06890 Tel. : 57 16 90 00 Internet : www.sharp.com.mx...
Page 44: Sharp Corporation
SHARP CORPORATION Printed in Mexico TINS-B246WJZZ 04P05-MMF 21FL94_42-44_EN 19/3/04, 11:53 am Dimension: 140mm x 215mm...

Sharp 21FL94 Operation Manual

Quick Links

Related Manuals for Sharp 21FL94

Summary of Contents for Sharp 21FL94

Table of Contents