Motorola DRC800-resized.fm Page 1 Tuesday, January 6, 2009 1:56 PM
Motorola DRC800 4-in-1
Universal Remote Control
User Guide
OVERVIEW
Your new Motorola DRC800 universal
4-in-1 remote operates your Motorola
or other manufacturer's cable set-top
box and up to three other devices.
In addition, the DRC800 provides
advanced features such as Digital
Video Recording (DVR) control and
Picture-in-Picture (PIP) support.
You can lock volume control to any of
these devices, to make adjusting your
home entertainment volume easier.
See "Changing Volume Lock". The
DRC800 comes from the factory
without the volume locked to any
specific device.
You can also change what type of
device each mode key controls. See
"Reassigning Device Keys".
Operating Range
Your remote controls devices from up
to 50 ft (15 m) away if you are directly
in front of the device, or from up to 20
ft (6 m) away if you are off to either
side.
INSTALLING BATTERIES
Your remote requires 2 AAA batteries.
The first set of batteries is included,
and should last up to 6 months under
normal usage.
1.
Remove the battery case cover
and the old batteries (if
necessary).
2.
Follow the diagram inside the
battery case to insert the new
batteries.
Note: Always use new, high quality
replacement batteries. Ensure that the
batteries are not damaged before
inserting them into the remote.
You have ten minutes to replace the
batteries before your remote loses
memory.
USING YOUR REMOTE
To select a device to control, simply
press one of the device mode keys (TV,
AUDIO, DVD/VCR, CABLE) at the top of
your remote. After you set up the
remote to control that device, you may
begin using the device.
See "Programming Device Control"
for more information on identifying a
specific device to a device key.
Press this
To...
Key
Turn the selected
device ON or OFF
Audio, DVD/VCR,
Select a device
TV, Cable
Direct access to Video
On Demand (VOD),
where available
Direct access to Pay Per
View (PPV)
programming (where
available)
REW
Rewind VCR, DVD,
VOD , DVR, or HTIB
PLAY
Play VCR, DVD, VOD ,
DVR, or HTIB
FFWD
Fast Forward VCR,
DVD, VOD , DVR, or
HTIB
RECORD
Record to VCR or DVR
PAUSE
Pause VCR, DVD, VOD
or DVR
STOP
Stop VCR, DVD, VOD
or DVR
Replay the previous
few seconds of a
program (only
available with DVR
models)
Display a list of
programs that you
recorded. This will
allow you to select one
for viewing (only
available with DVR
models)
Press this
To...
Key
Displays live television
programming (only
available with DVR
models)
Mute current audio
feed
Jump among pre-
selected favorite
channels (only
available in CABLE
mode)
Note:
Favorite
channels must be pre-
selected through the
Electronic
Programming Guide
before this key works.
Display the help screen
(only available in
CABLE mode)
Return to last selected
channel
VOL +/-
Increase or decrease
volume
CH +/-
Select the next or
previous channel
Move up or down
through menu screens
or the Electronic
Program Guide
Exit any On-Screen
Display (OSD) and
return to regular
viewing
Display channel and
program information
Access the cable guide
Access any OSD for the
currently selected
device
Move up through any
OSD or cable guide
menu
Move down through
any OSD or cable guide
menu
Move left through any
OSD or cable guide
menu
Move right through any
OSD or cable guide
menu
Select the currently
highlighted OSD menu
or cable guide choice
View the previous or
next day's cable guide
Press this
To...
Key
These functions are set
by your cable provider
These functions are set
by your cable provider
These functions are set
by your cable provider
Enter a channel or
device code number. To
access channels lower
than 100, you may
need to enter 3 digits.
For example, to access
channel 2, press 0-0-2.
For channel 22, press
0-2-2.
Input
Select the video source
Aspect
Change the viewing
aspect (if available)
PIP ON/OFF
Turn Picture-in-
Picture (PIP) on or off
(if available)
PIP SWAP
Swap the PIP signal to
the main display (if
available)
PIP Move
Move the position of
the PIP display
PIP CH +/-
Select the next or
previous channel in the
PIP display (the main
display does not
change)
PROGRAMMING DEVICE
CONTROL
Each of the additional device keys
controls a particular type of device.
For example, the DVD/VCR key
controls your VCR, DVR, or DVD
player, but not your TV, unless you
specify otherwise. See "Reassigning
Device Keys".
This device
Controls this type of
key...
device...
TV
TV
DVD/VCR
DVD, VCR, DVR,
HTIB, TV/VCR,
TV/VCR/DVD,
and TV/DVD
Cable box only
Cable
Audio
Amplifier, Tuner
To specify a device
1.
Look up the device you want to
control in the device code list on
the back of this guide.
2.
Press and hold a device key
(AUDIO, DVD/VCR, or TV) for at
least six seconds. The LEDs for
eac
LED
rem
3.
Ent
dev
afte
Note: Yo
eac
tha
you
4.
If th
cod
thre
rem
you
you
you
rep
cod
If th
the
Ret
step
list
for
for
SEARCH
If none o
"Device C
guide ma
search fo
work. Yo
codes in
mode to
control y
1.
Pre
key
at l
eac
the
sele
2.
Pre
Pow
fun
Sea
rec
•
•
•
•
•
The
thre
3.
Pre
the
you
4.
If th
fun
The
dev
If th
fun
3. P
cod
Tip: Note
case you