Troubleshooting Cooling Fans - Dell PowerEdge T630 Owner's Manual
Hide thumbs
Also See for PowerEdge T630:
- Owner's manual (176 pages) ,
- Owner's manual (181 pages) ,
- Getting started (2 pages)
Table of Contents
Advertisement
•
System cover, cooling shroud, EMI filler panel, memory module blank, or back filler bracket is not
removed.
•
Ambient temperature is not higher than the system specific ambient temperature.
•
External airflow is not obstructed.
•
A cooling fan is not removed or has not failed.
•
The expansion card installation guidelines have been followed.
Additional cooling can be added by one of the following methods:
From the iDRAC web GUI:
1.
Click Hardware → Fans → Setup.
2.
From the Fan Speed Offset drop-down list, select the cooling level required or set the minimum fan
speed to a custom value.
From F2 System Setup:
1.
Select iDRAC Settings → Thermal, and set a higher fan speed from the fan speed offset or minimum
fan speed.
From RACADM commands:
1.
Run the command racadm help system.thermalsettings
For more information, see the Integrated Dell Remote Access User's Guide at Dell.com/idracmanuals.
Related Links
Getting help
Troubleshooting cooling fans
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: The fan number is referenced by the systems management software. In the event of a
problem with a particular fan, you can easily identify and replace it by noting down the fan numbers
on the cooling fan assembly.
1.
Follow the safety guidelines listed in safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
Steps
1.
Remove the system cover.
2.
Reseat the fan or the fan's power cable.
3.
Install the system cover.
4.
Restart the system.
213
- Quick Links:
- Memory Specifications
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
