Verifying An Mqc Object - Cisco Nexus 9000 Series Configuration Manual
Nexus 9000 series data center switches
Hide thumbs
Also See for Nexus 9000 Series:
- Configuration manual (562 pages) ,
- Troubleshooting manual (126 pages) ,
- Quick start configuration manual (6 pages)
Table of Contents
Advertisement
Using Modular QoS CLI
Command or Action
Step 3
description string
Example:
switch(config-cmap)# description my traffic
class
switch(config-cmap)#
Step 4
exit
Example:
switch(config-cmap)# exit
switch(config)#
Step 5
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Verifying an MQC Object
To display MQC object configuration information, perform one of the following tasks:
Command
show class-map [type qos [class-name]]
show class-map [type queuing [class-name]]
show policy-map [type qos [policy-map-name]]
show policy-map [type queuing [policy-map-name
| default-out-policy]]
Purpose
Adds a description string to the MQC object. The description
can be up to 200 alphanumeric characters.
Note
Exits class-map mode and enters global configuration mode.
(Optional) Saves the running configuration to the startup
configuration.
Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 7.x
Verifying an MQC Object
You cannot modify the description of system-defined
queuing class maps.
Purpose
Displays information about all configured class maps,
all class maps of type qos, or a selected class map of
type qos.
Displays information about all configured class maps,
all class maps of type queuing, or a selected class map
of type queuing.
Displays information about all configured policy
maps, all policy maps of type qos, or a selected policy
map of type qos.
Displays information about all configured policy
maps, all policy maps of type queuing, a selected
policy map of type queuing, or the default output
queuing policy.
31
Advertisement
Table of Contents
