Table of Contents
Advertisement
Cisco Expressway CE1100 Appliance Installation Guide
Configure
Use the Web Interface
Note:
You must enter the address as HTTPS.
■
We recommend enabling the web UI in the install wizard but it is also possible to access your system using CLI
■
commands.
1.
Open a browser window and in the address line type either:
The IP address of the Cisco Expressway (for example: https://10.0.0.1).
—
The FQDN of the Cisco Expressway (for example: https://mydomain.example.com).
—
The Login page will appear.
2.
Select Administrator Login.
3.
Log in with a username of
You will be presented with the Overview page.
See the online help or Cisco Expressway Administrator Guide for information on the configuration options available for
each page of the Cisco Expressway web interface.
Use the Command Line Interface (CLI)
The command line interface is available over SSH and through the serial port by default.
1.
Start an SSH session.
2.
Enter the IP address or FQDN of the Cisco Expressway.
3.
Log in with a username of
You will see a welcome message.
For a full list of CLI commands available on the Cisco Expressway, see Cisco Expressway Administrator Guide.
Change Other System Settings
You are also required to configure the following:
The system name of the Cisco Expressway. This is used by the Cisco TelePresence Management Suite (Cisco
■
TMS) to identify the system. This can be set from the System administration page (System > Administration)
on the web interface.
Automatic discovery. If you have multiple Cisco Expressways in the same network you may want to disable
■
automatic discovery on some of them. This can be set from the H.323 page on the web interface
(Configuration > Protocols > H.323).
The DNS server address(es), if URI dialing or Fully Qualified Domain Names (FQDNs) are to be used. This can
■
be set from the DNS page on the web interface (System > DNS).
See the online help or Cisco Expressway Administrator Guide for more information on these configuration options.
Check for Updates and Upgrading
To check whether your Cisco Expressway has the latest software installed go to
http://software.cisco.com/download/navigator.html
See the Cisco Expressway Administrator Guide for information on how to upgrade.
Caution:
The CE1100 only supports software version X8.6.1 or later. If you are upgrading your hardware, do not
downgrade to an unsupported software version.
and your system password.
admin
and your system password.
admin
and navigate to the Cisco Expressway.
14
Hide quick links:
Advertisement
Table of Contents
