Table of Contents
Advertisement
KDC-MP5032
How to enter the test mode
In order to enter the test mode, reset the unit while simulta-
neously pressing down [1] and [3] keys.
(While "----" is being displayed, power can be ON for 30 min-
utes.)
How to clear the test mode
The test mode is cleared in case of any of the following events:
resetting, momentary power down, Acc OFF, Power OFF and
removal of the panel.
Initial conditions of the test mode
• Source is STANDBY.
• Displays lights are all turned on.
• The volume is at –10dB (The display is 30).
• Loudness (LOUD) is OFF.
• CRSC is OFF, regardless of whether there are switching
functions or not.
• SYSTEM Q is NATURAL (=FLAT).
• BEEP will sound anytime with a less than 1 second push.
Special display when set to TUNER
When in TUNER mode, if any of the following displays appear,
there is an abnormality with the front end.
• "TNE2P_NG" : Front-end E2PROM values are still default
(not determined).
• "TNCON_NG" : In this condition, the communication with
the front-end is not possible.
Forced switching of K3I
In TUNER FM mode, each time [6] key is pressed, the func-
tions move in the following cycle :
AUTO → forced WIDE → forced MIDDLE → force NARROW
→ AUTO
The initial condition is AUTO and the displays below will ap-
pear.
• AUTO : FM1_98.1A
• Forced MIDDLE : FM1_98.1M
• Forced WIDE : FM1_98.1W
• Forced NARROW : FM1_98.1N
CD receiver test mode specifications
• Display mode default setting shall be P-TIME
• Jumps to the next tracks by pressing the [
No. 9 → No. 15 → No. 10 → No. 11 → No. 12 → No. 13 →
No. 22 → No. 14 → No. 9 (Recursive)
It must be noted, however, that when paying MP3 / WMA /
10
TEST MODE
AAC disk, which contain 8 files or less, the first track and
the following tracks are played in order.
• When [
• When playing an MP3 / WMA / AAC disc, display the file
format before starting to play each file.
("MP3", "WMA", "AAC")
• When a CD is used as a source, by pressing [1] key for less
than 1 second, a jump to the Track No. 28 is made.
• When a CD is used as a source, by pressing [2] key for less
than 1 second, a jump to the Track No. 14 is made.
• When a CD is used as a source, by pressing [3] key for less
than 1 second, a display of CD mechanism model name
and its version is made. When the pressing of [3] key for
less than 1 second is made for the second time, the normal
display is resumed. (Time code display)
• When a CD is used as a source, by pressing [6] key for less
than 1 second, a jump to the Track No. 15 is made. At the
same time, the volume value is set to 27 (4V PRE).
Audio adjust mode
Model with no DSP
• By pressing [AUD] key for less than 1 second, the audio
adjustment mode can be entered.
• Using the remote controller [∗] key and [AUD] key, the au-
dio adjustment mode can be entered.
• Adjustment items of both the AUDIO FUNCTION MODE
and SETUP MODE are included.
• By pressing [AUD] or [FM] key briefly, switch the item to be
adjusted in the following order. (only in forward rotation)
The initial item will be Fader, which is followed by : Balance
→ Bass Level → Middle Level → Treble Level → HPF Front
→ HPF Rear → LPF Sub Woofer (After this, it will be arbi-
trary)
• With the remote controller, continuous forwarding is pro-
hibited.
• Using the VOL knob and [
adjusted in 3 steps : R15 ↔ 0 ↔ F15 (The initial value is 0)
• Using the VOL knob and [
be adjusted in 3 steps : L15 ↔ 0 ↔ R15 (The initial value is
] key.
0)
• Using the VOL knob and [
/ Treble Level can be adjusted in 3 steps : –8 ↔ 0 ↔ +8
] key is pressed, it goes down by 1 track.
6 6 8 0 : 0 1 2 3
Model name
Version
] / [
] key, the Fader can be
] / [
] key, the Balance can
] / [
] key, the Bass / Middle
Advertisement
Table of Contents
