Show Rmon - Cisco Nexus 7000 Series Reference Manual

Nx-os system management command reference

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

Show Commands

show rmon

To display the configuration or onboard logs, use the show rmon command.

Syntax Description

Command Modes

Any command mode

Supported User Roles

network-admin

network-operator

vdc-operator

Command History

Usage Guidelines

This command does not require a license.

This example shows how to display the configured RMON alarms:

switch# show rmon alarms

Alarm 20 is active, owned by test

Monitors 1.3.6.1.2.1.2.2.1.16.30 every 30 second(s)

Taking delta samples, last value was 17

Rising threshold is 15, assigned to event 1

Falling threshold is 0, assigned to event 0

On startup enable rising or falling alarm

This example shows how to display the configured RMON events:

switch# show rmon events

Event 4 is active, owned by administrator@london_op_center

Description is WARNING(4)

Event firing causes log and trap to community public, last fired 03:32:43

This example shows how to display the configured high-capacity RMON alarms:

show rmon {alarms | events | hcalarms | logs | status}

Displays the configured 32-bit RMON alarms.

Displays the configured RMON events.

Displays the configured 64-bit HC (High Capacity) RMON alarms.

Displays the RMON event log.

Displays the RMON information.

Modification

This command was introduced.

Cisco Nexus 7000 Series NX-OS System Management Command Reference