Table of Contents
Advertisement
Quick Links
BRIC30S/BRIC30N User Manual
Contents
Introduction......................................................................................................................... 2
1. Safety Precautions ...................................................................................................... 3
1.1. Important Rules ................................................................................................... 3
1.2. Symbols ................................................................................................................ 4
2. Product Introduction .................................................................................................... 5
2.1. General Characteristics...................................................................................... 5
2.2. Special Features.................................................................................................. 5
3. Unpacking and Installation ......................................................................................... 7
3.1. Environmental Requirements ............................................................................ 7
3.2. Easy Installation and Removal .......................................................................... 9
3.3. Electrical Installation ......................................................................................... 10
3.4. Comm. Port Description ................................................................................... 14
4. Operating Mode and Instructions ............................................................................ 16
4.1. Operating Mode................................................................................................. 17
4.2. Single Unit Operation ....................................................................................... 17
4.3. Parallel Mode Operation .................................................................................. 20
4.4. LED Display ....................................................................................................... 22
5. Monitoring Platform ................................................................................................... 23
5.1. Panel ................................................................................................................... 23
6. Communications interface:....................................................................................... 35
6.1. RS-232 interface ............................................................................................... 35
6.2. RS-485 interface ............................................................................................... 35
7. Troubleshooting ......................................................................................................... 36
8. Maintenance ............................................................................................................... 37
8.1. Regular Maintenance ....................................................................................... 37
8.2. Battery................................................................................................................. 37
8.3. Fan ...................................................................................................................... 37
8.4. Capacitor ............................................................................................................ 37
8.5. Fuse .................................................................................................................... 37
9. Accessories and Options.......................................................................................... 38
9.1. Accessories........................................................................................................ 38
9.2. Options................................................................................................................ 40
10.Specification ............................................................................................................... 41
1
Advertisement
Table of Contents
Related Manuals for Ablerex BRIC30S
Summary of Contents for Ablerex BRIC30S
-
Page 1: Table Of Contents
6.2. RS-485 interface ....................35 7. Troubleshooting ......................36 8. Maintenance ....................... 37 8.1. Regular Maintenance ..................37 8.2. Battery......................... 37 BRIC30S/BRIC30N User Manual 8.3. Fan ........................37 8.4. Capacitor ......................37 8.5. Fuse ........................37 9. Accessories and Options..................38 9.1. -
Page 2: Introduction
Introduction Safety Precautions Thank you for purchasing our product. Please read through this manual 1.1. Important Rules carefully to ensure the correct operation of the product you purchased. We will also 1.1.1. Please follow these UPS operating instructions to ensure safe and help you with installing and operating this product. -
Page 3: Symbols
1.2. Symbols Product Introduction Please follow the instructions and warnings on the UPS module. 2.1. General Characteristics 2.1.1. Pure online UPS architecture to provide connected equipment with pure sine wave AC power that is stable, continuous and has a fixed voltage. -
Page 4: Unpacking And Installation
monitoring program can also display any errors for fast troubleshooting. 2.2.7. The modular design of this UPS means it can not only operate Unpacking and Installation independently but also in parallel mode for even higher power output. The UPS may experience unexpected circumstances during transportation. 2.2.8. -
Page 5: Easy Installation And Removal
The UPS module should be placed inside a cabinet for safety when running. An optional rack mounting is available for BRIC30S/BRIC30N installation. Please refer to the mechanical installation guide for safety purposes. The outer casing may need to be removed in certain situations to operate the machine. -
Page 6: Electrical Installation
3.3.2. BRIC30S/BRIC30N offers two installation methods for connecting 3.3.1. BRIC30S/BRIC30N uses a plug and play design for the power input. external UPS power sources: single-loop or dual-loop: Grid power can be connected to the connector kit to power female socket. When the UPS module is connected to the connector kit, power ... - Page 7 Attention: Recommend using the rated of cable 8AWG for phase L of AUX input / Mains input / Load and more then 6 AWG for phase N; 6 AWG for B+/N_B/B-; 6AWG rated for PE with color yellow/green wire. BRIC30S schematic diagram BRIC30N schematic diagram...
-
Page 8: Comm. Port Description
3.4. Comm. Port Description External communications of BRIC30S/BRIC30N interface is placed within the slot are fitted to the front panel of the inner metal casing. The locations and front external plastic casing. The location and function are described below: functions are described below: ①... -
Page 9: Operating Mode And Instructions
4.2. Single Unit Operation BRIC30S/BRIC30N offers not only the three above power supply modes but Check that the power supply voltage matches the UPS specifications. Make also an Economy mode and Converter mode for special environments. - Page 10 Mains power normal boot mode Monitoring Software Touch Panel BRIC30S/BRIC30N offers a Cold Start kit that allows the UPS to boot directly from the battery when grid power fails. Check that the battery capacity and quantity matches the UPS requirements.
-
Page 11: Parallel Mode Operation
4.3.2. Procedure On the touch panel select Main → Command → Operation → Shutdown Before all on-line units need to be functioned with item “command” Mode or→Bypass Mode. Alternatively, from the monitoring software select synchronously, please check that the selected unit is master one and set Home →... -
Page 12: Led Display
Monitoring software running on a computer can also be used. BRIC30S/BRIC30N provides the user with a simple and intuitive user interface that is easy to learn. The touch panel and computer-side monitoring software offers a combination of graphics and numbers that make it easy to determine the input/output voltage, frequency, load and battery level at a glance. - Page 13 Default screen is as shown above. The individual blocks are described below: Click Block A to enter the Main. The menu items are as shown in section5.1.2. Block B is the status display area. The display is divided into the upper and lower row.
- Page 14 5.1.3. Mimic Display All of the functions are listed in the following table: Menu Functionality Description This function is mainly used to display Mimic Display important information such as the monitor readings, UPS mode and alarms. The user can use this function to issue Command boot, shutdown,...
- Page 15 The relationship between battery capacity and progress display is as 5.1.5. UPS Monitor pictured below: Clicking on Main→Monitor→Measurements will bring up the real-time monitor readings. The pop-up menu on the right can be used to select other observation options as pictured below. ≧80% <20% <40%...
- Page 16 buttons can be used to set how long before the backlight module enters Clicking on Bypass, Main or Output will display the available monitor power-saving mode. If "Disable" is selected then the backlight module reading options. Click on the required readings to change the settings. power-saving mode is switched off.
- Page 17 5.1.10. Log on Load 5.1.11. Screen Calibration Please aim and press the center of the target accurately. Repeat the motion Clicking on Main→Log on Load displays the tri-phase load record of the UPS described above as the target moves around the screen until the display shows as pictured above.
-
Page 18: Communications Interface
Communications interface: 5.1.12. Pop-up Window 6.1. RS-232 interface When a pop-up window appears on screen, clicking on the "Yes" or "OK" 6.1.1. Communications interface setting button allows the software to continue. Clicking on "No", "Cancel" or will cancel the action as pictured below. baud rate 9600bps data length... -
Page 19: Troubleshooting
8.5. Fuse The BRIC30S/BRIC30N contains three sets of fuses, one for Input, one for Output and one for Battery Output. If you need to replace a fuse do not use a higher fuse rating. Apart from ensuring that all fuses are from the same... -
Page 20: Accessories And Options
9.1.3. Temperature Cable Installation Location Specification Input (3 pcs/set) 80A/690V Output (3 pcs/set) 80A/690V Battery (2 pcs/set) 160A/660V Accessories and Options Connecting the temperature cable with the battery temperature port on 9.1. Accessories external communication device is used for monitoring the temperature of battery 9.1.1. -
Page 21: Options
The UPS should be placed inside a cabinet to prevent unexpected hazards. Item Specifications We have designed rack and mounting accessories for the BRIC30S/BRIC30N as General an option for our customers to choose from. Detailed installation instructions are Nominal power 30kVA/27kW provided separately. - Page 22 Common battery feature Output electrical characteristics Floating charge voltage 2.30V/cell Technology Bridge with IGBT Cut-off voltage 1.60V/cell Nominal output voltage (selectable) 3x380/400/415V+N Max charging current 10Adc Power factor at nominal power Static: ±1% Efficiency Tolerance on the output voltage Dynamic: ±5% (0~100% or 100~0% stepping load) Efficiency in dual conversion mode >...