Table of Contents
Advertisement
Available languages
Available languages
SAFETY FEATURES
The 360° Surround Heat™ Heater is equipped with several devices and features for added
protection:
• 360° SafetyTIP™ is an all-around tip-over switch that disables the heater if it is accidentally
tipped in any direction.
• A high temperature safety control prevents overheating.
• This heater is also equipped with a thermal cut-off fuse that will permanently shut down the
heater should it operate at a higher than normal temperature.
• This heater was created using a high quality safety plastic.
CLEANING
We recommend that the 360° Surround Heat™ Heater be cleaned at least once a month and before
off-season storage.
• Turn the heater OFF (
• Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES,
POLISHES OR ANY CHEMICAL SOLUTION.
STORAGE
• Clean your 360° Surround Heat™ Heater using the above-mentioned steps. Wrap the cord
around the unit. Place in its original box and store it in a cool, dry place.
• This heater does not disassemble.
TROUBLESHOOTING
If your 360° Surround Heat™ Heater shuts off unexpectedly or fails to operate, one of your heater
safety features may have been activated to prevent overheating.
• Be sure it is plugged in and that the electrical outlet is working.
• Check your Thermostat Control setting. The unit may simply be off because you have reached
your desired heat setting.
• Check for any obstructions. If you find an obstruction, turn the heater OFF (
Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then
re-plug the heater in and follow the OPERATION instructions.
o
) and unplug it. Allow it to cool.
o
) and unplug it.
Hide quick links:
Advertisement
Table of Contents
