Configuring A Root Ca (Trusted Root) - Cisco Catalyst 2960 series Configuration Manual
Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs
Also See for Catalyst 2960 series:
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages) ,
- Configuration manual (120 pages)
Table of Contents
Advertisement
How to Configure Certification Authority
Command or Action
Step 12
end
Example:
Device(ca-trustpoint)# end
Configuring a Root CA (Trusted Root)
SUMMARY STEPS
1. enable
2. configure terminal
3. crypto ca trustpoint name
4. revocation-check method1 [method2 method3]
5. root tftp server-hostname filename
6. enrollment http-proxy hostname port-number
7. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
crypto ca trustpoint name
Example:
Device(config)# crypto ca trustpoint ka
Step 4
revocation-check method1 [method2 method3]
Example:
Device(ca-trustpoint)# revocation-check ocsp
Step 5
root tftp server-hostname filename
Example:
Device(ca-trustpoint)# root tftp server1 file1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1150
Purpose
Exit CA trustpoint configuration mode and returns to
privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Declares the trustpoint that your device should use and
enters CA trustpoint configuration mode.
Checks the revocation status of a certificate.
Obtains the certification authority (CA) certificate via
TFTP.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
